Used process engineering in Marche, Italy

2010 ENGIN PLAST DPM 15/30 #AI0342

• Manufacturer: Engin Plast

- Production: 1 - 15 Kg/h Guy: ENGINE PLAST DPM 15 / 30 volumetric doser | Auger features pitch mm: 25 | Auger features diameter mm: 30 | Hopper capacity dm3: 25 | Rated power kw: 0.8 | Nominal voltage v: 220

2011 ENGIN PLAST DPM 15/30 #AI0344

• Manufacturer: Engin Plast

- Production: 1 - 15 kg/h Guy: ENGINE PLAST DPM 15 / 30 volumetric doser | Auger features pitch mm: 25 | Auger features diameter mm: 30 | Hopper capacity dm3: 25 | Programming keypad: YES (on board) | Rated power...

2009 ENGIN PLAST DPM 15/30 #AI0339

• Manufacturer: Engin Plast

2010 ENGIN PLAST DPM 15/31 #AI0351

• Manufacturer: Engin Plast

Guy: Volumetric doser | Auger features pitch mm: 25 | Auger features diameter mm: 30 | Hopper capacity dm3: 25 | Programming keypad: Yes on the electrical panel | Rated power kw: 0.8 | Nominal voltage v: 220

2012 ENGIN PLAST DPM 15/30 #AI0347

• Manufacturer: Engin Plast

Guy: Volumetric doser | Auger features pitch mm: 25 mm | Auger features diameter mm: 30 mm | Hopper capacity dm3: 25 dm3 | Rated power kw: 0,18 Kw | Nominal voltage v: 220 V

2005 ENGIN PLAST DPM 15/30 #AI0331

• Manufacturer: Engin Plast

Guy: Volumetric Doser | Auger features pitch mm: 25 mm | Auger features diameter mm: 30 mm | Hopper capacity dm3: 25 Dm3 | Rated power kw: 0,18 Kw | Nominal voltage v: 230V

2005 KRAUSS MAFFEI 420-1900 C2 #IN0094

• Manufacturer: Krauss-Maffei
• Model: 420-1900 C2

MACHINE EQUIPPED WITH GAS INJECTION SYSTEM Tonnage: 420 | Pump type: Variable | Screw diameter mm (a): 70 | Theoretical vol. (a): 1047 | Working hours: pump 74466 automatically 65422 | Mould thickness mm: 380 | T...

2000 BATTENFELD 90mm; L/D 30; Cambia #ES0031

• Manufacturer: Battenfeld

- Nordson EH-35 Automatic Screen Changer - Material processed: PP / PE

2000 BATTENFELD 90mm; L/D 30; Cambia #ES0033

• Manufacturer: Battenfeld

- Nordson EH-35 Automatic Screen Changer - Material processed: PP / PE

2000 BATTENFELD ES0028

• Manufacturer: Battenfeld

- Heated zones: 5 - Automatic filter change - Material processed: PP/PE

2009 TECNOMATIC SRL LC.1.60.30

• Manufacturer: Tecnomatic

Typology: Mono | Screw diameter mm: 60 | Degassing: No | Dosers n.: 3 | Engine power kw: 100 | L/d ratio n.: 30 | Engine type: Asynchronous

1991 F.LLI MARIS SPA TM65VI

• Manufacturer: F.LLI MARIS SPA

Typology: Twin screw | Screw diameter mm: 65 | Degassing: Yes | Forced feeding: S | Dosers n.: 4 | Engine power kw: 145 | L/d ratio n.: 43 | Engine type: Direct current

2002 FRIGEL ED50 AI0013

• Manufacturer: FRIGEL

H2o conditions: water and glycol | Gas type: no gas | Cooling power kw: 50 | Tank capacity lt: 300 | Compressor no.: no | Voltage v: 400 + 220 | Pump: 1 | Pump kw flow rate: 1,5 | Pump flow rate l/min: 192

1991 BANDERA DIAMETRO 90 #ES0093

• Manufacturer: Luigi Bandera

COMPLETE PROFILE LINE SINGLE SCREW EXTRUDER, 90° DIAMETER CALIBRATION BENCH WITH CALIBRATION TANK TRACK DRIVE CUTTING MACHINE PROFILE TILT-OFF

CINCINNATI CMT 80L #ES0079

• Manufacturer: Cincinnati
• Model: CMT

Conical twin screw, diameter 80 Thermoregulated screws Degassing Electric motor replaced in 2018 Electric motor inverter replaced in 2018 68 kW motor PLC control retrofit with BCtouch controller