Processing » Japan

Search By Category

Search By Manufacturer

Search By Prefecture

Building Filters

535

Used engine in Japan

  • 1997 Mitsubishi Chemical Engineering 58L

    1997 Mitsubishi Chemical Engineering 58L

    • Manufacturer: Mitsubishi Chemical Engineering

    Capacity:0.058m3 Class 1 pressure vessel (no data) Maximum working pressure: 30 kg/cm2 Maximum working temperature: 230°C Operation panel available Remarks Operation panel: Newly made is recommended. Others: Curr...

    Hiroshima, Japan
  • Tikara Engineering 60 × 25

    Tikara Engineering 60 × 25 1/2 type

    • Manufacturer: チカラエンジニアリング

    Main unit, scraping unit, hydraulic unit Capacity: 610L Rotation speed: 840(600G)~970RPM(800G) During scraping: 11RPM Without control panel and filter cloth. Please contact us for availability. We can provide you...

    Hiroshima, Japan
  • Tomoe Engineering P-3000

    Tomoe Engineering P-3000

    • Manufacturer: Tomoe kogyo

    No spare ball gearbox for decanter Material: SUS | Quantity saved: Two

    Hiroshima, Japan
  • Tomoe Engineering P-3000

    Tomoe Engineering P-3000

    • Manufacturer: Tomoe kogyo

    22kw 4000rpm/3200G Processing capacity: 3-5m3/H Power: 22kw | Material: SUS | Quantity saved: One

    Hiroshima, Japan
  • 2011 Izumi Environmental Engineering Vertical

    2011 Izumi Environmental Engineering Vertical

    • Manufacturer: 泉環境エンジニアリング

    Tube: 25.4φ (2t) x 3000L x 165 tubes (SUS304) Body plate: 500φ (SGP-E)

    Hiroshima, Japan
  • Red Bam Engineering VSP -

    Red Bam Engineering VSP - 25P

    • Manufacturer: 赤武エンジニアリング

    Powder Conveying System, Sanitary Specifications (Conveying Piping 2S) Suction volume: 2500L/hr Air drive

    Hiroshima, Japan
  • 2017 Chikara Engineering HANG48×800

    2017 Chikara Engineering HANG48×800

    • Manufacturer: チカラエンジニアリング

    Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 796G Scraping device hydraulically driven With control panel

    Hiroshima, Japan
  • 1989 [Chiyoda Engineering] Electric furnace

    1989 [Chiyoda Engineering] Electric furnace No model

    • Manufacturer: 千代田エンジニアリング

    Hot air circulation / cylinder rotation type With blower

    Hiroshima, Japan
  • 2009 Nippori Engineering DD-40NX6-0

    2009 Nippori Engineering DD-40NX6-0

    • Manufacturer: ニッポリエンジニアリング

    Treatment air volume 25m3/min

    Hiroshima, Japan
  • [Nisso Engineering] Multi-tube heat exchanger

    [Nisso Engineering] Multi-tube heat exchanger 20m²

    • Manufacturer: 日曹エンジニアリング

    Heat transfer area: 20 m2 Material: Tube: STB340-SC Shell: SUS304 (bolts and nuts: SS)

    Hiroshima, Japan
  • [Sumitomo Chemical Engineering] Multi-tube heat

    [Sumitomo Chemical Engineering] Multi-tube heat exchanger 20m²

    • Manufacturer: 住友ケミカルエンジニアリング

    Heat transfer area: 20㎡ Material: Tube: SUS304 Shell: SS400 Drawings available

    Hiroshima, Japan
  • [Tokyo Engineering] Filter Press TFAP7-14

    [Tokyo Engineering] Filter Press TFAP7-14

    • Manufacturer: 東京エンジニアリング

    750mm square x 7 chambers (double) Filtration area: Approx. 6m2 (estimated) Accessories: Hydraulic unit

    Hiroshima, Japan
  • 1992 Belltong Engineering Model KP-110-1000

    1992 Belltong Engineering Model KP-110-1000

    • Manufacturer: Belltong Engineering

    RPF Production Equipment Waste Plastic Volume Reducing Machine (PLAPACK) Parts replacement (sequencer) is required for the operation panel. With drawing, specification and instruction manual

    Kure, Japan
  • Trusted Seller
    2010 Nagano Science LH 21

    2010 Nagano Science LH 21 - 12 M

    • Manufacturer: Nagano Science

    Machine Specifications Power supply AC200V (within 190 to 220V) 3φ 50/60Hz Maximum load current (main breaker) 18.5A (30A) Operating ambient temperature range +5°C to +35°C Temperature/Humidity Range Temperature/...

    Tokyo, Japan
  • Truck Mounted Vacuum Cleaner Gasoline

    Truck Mounted Vacuum Cleaner Gasoline Engine

      This engine vacuum uses its powerful engine to powerfully suction up fallen leaves, dead leaves, and grass clippings from the roadside. It's perfect for summer, when mowing is in full swing, or when leaf cleaning...

      Tsukuba, Japan
    12345

    Overview

    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

    FAQ

    What should I consider when buying used processing equipment?

    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

    How do I arrange shipping for processing equipment?

    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

    What is the typical maintenance for processing equipment?

    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.