Processing » Japan

Building Filters

15

Used electronics in Japan

  • 1995 Musashino Electronics MA350

    1995 Musashino Electronics MA350

      Used for Ga-As Device name: Wrapping equipment

      Tokyo, Japan
    • Sanyu Electronics Sanyu SC-701C

      Sanyu Electronics Sanyu SC-701C

        Year: 2010 Specs:.

        $1,889 USD
        Tokyo, Japan
      • 2010 Sanyu Electronics Sanyu SC-701C

        2010 Sanyu Electronics Sanyu SC-701C

          Device name: carbon coater

          Tokyo, Japan
        • no-image_en.png

          2022 Asia Electronics SOLDER ACE

          • Manufacturer: Solex

          Stand-alone table-top stationary tank. Lead-Free Static soldering equipment Inner dimensions of the tank: 300 x 400 mm 60Kg solder capacity (lead-free) Solder jet height adjustment Temperature control With specia...

          Nara, Japan
        • no-image_en.png

          HITACHI SRL-7.5DMA5

          • Manufacturer: Hitachi
          • Model: SRL-7.5

          Manufacturing process: Other

          Tokyo, Japan
        • no-image_en.png

          Linser Dryer

            Manufacturing process: cleaning | Inch: 4

            Tokyo, Japan
          • FOLKE & SANDELIN Type 3

            FOLKE & SANDELIN Type 3

            • Manufacturer: FOLKE & SANDELIN

            9 inches block for 6 to 85mm OD; Machine, new electronic and new T control in 2027 *Furnace and material conveyor not included

            Tokyo, Japan
          • Meiji UP-2B

            Meiji UP-2B

            • Manufacturer: 明治

            Fuji Compressor Electronic Trap UP-2B 100V Drain discharge time 2-20 seconds Drain discharge cycle time 2-60 minutes For air tank

            Hamamatsu, Japan
          • SmallRig MagicFIZ (2 motors)

            SmallRig MagicFIZ (2 motors)

            • Manufacturer: SmallRig

            The MagicFIZ is designed to provide a precise follow-focus solution for a single photographer or a team of photographers in handheld, shoulder shooting and monitoring. The focus handwheel is powered by a 1400mAh ...

            Saitama, Japan
          • Furukawa Manufacturing Co., Ltd. FVV-10-220N

            Furukawa Manufacturing Co., Ltd. FVV-10-220N

            • Manufacturer: 株式会社 古川製作所

            Power supply: Three phase 200V 50 / 60Hz | Body power: 4.8kW | Outside size: Width 2690 x Depth 2278 x Height 1600 (mm) | Body weight: 2400kg | Required cooling water volume: Approximately 3 liters/minute | Air ...

            Toda, Japan
          • Orion Machinery Co., Ltd. RKS1500G-MV

            Orion Machinery Co., Ltd. RKS1500G-MV

            • Manufacturer: オリオン機械株式会社

            Power supply: Three-phase 200V (50/60Hz), three-phase 220V (60Hz) | Power consumption: 1.7kW/1.9kW, 1.9kW | Current: 6.6A/7.2A, 7.2A | Power capacity: 3.9kVA(メーカーカタログスペック) | Cooling capacity: 4.9kW / 5.3kW | Hea...

            Toda, Japan
          • Ishizaki Electric Manufacturing Corporation (SURE)

            Ishizaki Electric Manufacturing Corporation (SURE) NL-451PA-5

            • Manufacturer: 株式会社 石崎電機製作所(SURE)

            Power supply: Single phase 100V 50 / 60Hz | Electric power: 1200W | Temperature of bonding area: 260℃ | Heating method: impulse | Seal dimensions: Length 450 x Width 5 (mm) | Timer (seal time): 0.3 to 2.2 second...

            Toda, Japan
          • Fujimac Corporation FEFS259D

            Fujimac Corporation FEFS259D

            • Manufacturer: 株式会社フジマック

            Features : Stand type Direct heating for fast and efficient start-up. The running cost is also economical. Precise control of oil temperature is done automatically. Easy to use and hygienic. The heater is equippe...

            Toda, Japan
          • SPEEMER CORPORATION SPEEMER Model 2800

            SPEEMER CORPORATION SPEEMER Model 2800

            • Manufacturer: スピーマー株式会社

            Required power heater: Three-phase 200V 3.6kW Drive motor three-phase 200V 0.2kW Vacuum motor single phase 100V 1.2kW Cutting heater single phase 100V 0.2kW Operation power supply single phase 100V 0.5kW

            Toda, Japan
          • Tsurumi Manufacturing Co., Ltd. RSR-100

            Tsurumi Manufacturing Co., Ltd. RSR-100

            • Manufacturer: Tsurumi

            Power supply: Three-phase 200 V 50/60 Hz | Caliber: 100mm | Handling: Fluid: Air Temperature: 0 to 40°C | Air flow: 4.57 cubic meters per minute | Discharge pressure: 44.1kPa | Rotational speed: 1240 times/min |...

            Toda, Japan

          Overview

          Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

          FAQ

          What should I consider when buying used processing equipment?

          Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

          How do I arrange shipping for processing equipment?

          Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

          What is the typical maintenance for processing equipment?

          Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.