Used centrifuges in Japan

Kansai Centrifuge M-04
- Manufacturer: Kansai centrifuge
Two-phase separation Motor: 1.5kw Wetted parts material: SUS Rotation speed: 20,000 rpm Sealed box with temperature regulator Model: M-04NO,U-4-HR
Hiroshima, Japan
Basket type centrifuge
- Manufacturer: タナベ製
24-inch x 2, 26-inch x 2 Top discharge type with manual brake
Kure, Japan
Saito centrifuge machine ADS10000P
- Manufacturer: Saito centrifuge
25kw Purifier (for oil) 5000rpm Processing capacity: 10t/h
Hiroshima, Japan
Saito Centrifuge Machine ADS-5001PS
- Manufacturer: Saito centrifuge
Purifire, with a set of disassembly tools 11 kw Power: 11kw | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
[TANABE WILTECH] Basket type centrifuge 55inch
- Manufacturer: Tanabe Wiltech
Manual scraping device. Bottom discharge type. Main motor pole change specification, 13Kw-26Kw 200V, explosion proof
Hiroshima, Japan
[TANABE WILTECH] Basket type centrifuge 55inch
- Manufacturer: タナベウィルテック
Fully automatic bottom discharge type. Hydraulic drive for scraper. Low speed motor 2.2Kw 200V. No nameplate.
Hiroshima, Japan
[TANABE WILTECH] Basket type centrifuge 55inch
- Manufacturer: タナベウィルテック
Fully automatic bottom discharge type. Hydraulic drive for scraper. Low speed motor 2.2Kw 200V. Star-delta startup board available.
Hiroshima, Japan
1990 [Tanabe Willtech] Basket type centrifuge 36inch
- Manufacturer: タナベウィルテック
Fully automatic bottom discharge type. Hydraulic driven scraper. Explosion-proof low-speed motor 0.8Kw 200V.
Hiroshima, Japan
2010 G-TECH 1456/3 type
- Manufacturer: G-TECH
Centrifugal effect: 3150G Left speed rotation: 4-48rpm Acceleration time: 2-3min Wetted parts: SUS316 Wear-resistant with 2 pumps. The product is made in Australia, but we provide full support. No operation panel
Kure, Japan
2017 Chikara Engineering HANG48×800
- Manufacturer: Tikara Engineering
Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 796G Scraping device hydraulically driven With control panel
Hiroshima, Japan
Alfa Laval (DeLaval) SSG109
- Manufacturer: アルファラバル(デラバル)
3.7KW 200V 7900rpm Where to use: Chemical plants Food plants Feed and fertilizer plants Environmental recycling plants Water treatment plants | Throughput: 2.500L～5,000L/h | Sealed wetted parts: SUS Main body only
Kure, Japan
Tanabe Wiltec TOP-48-80
- Manufacturer: Tanabe Wiltech
Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 800G Scraping device air-driven With control panel (without regenerative resistor)
Hiroshima, Japan
1989 Tanaka Giken Industry AE 55 × 22
- Manufacturer: Tanaka Giken Industry
55-inch SUS Fully automatic type Hydraulic unit (0.75kw) Basket capacity: 430L Rotation speed: 900rpm Centrifugal effect: 600G The entire machine is disassembled and serviced at our maintenance shop, so you can b...
Hiroshima, Japan
Alfa Laval SSG509
- Manufacturer: アルファラバル
Power: 3.7KW 200V Rotation speed: 1800rpm Where to use: Chemical plants Food plants Feed and fertilizer plants Environmental recycling plants Water treatment plants | Throughput: 2.500L～5,000L/h | Wet part: SUS M...
Kure, Japan
There is no nameplate 24 吋
- Manufacturer: No nameplate
Basket SUS Casing SS + resin sheet Upper discharge type Since the entire disassembly and maintenance is performed at our maintenance shop, you can be assured of the finish of the mechanical parts as well as the e...
Hiroshima, Japan
Alfa-Laval LAPX Centrifugal Separator
- Manufacturer: Alfa-Laval
- Model: LAPX
Good condition Alfa-Laval LAPX Centrifugal Separators manufactured in 2003. Located in USA and other countries. Click request price for more information.
USA