Used controller in Italy

2013 5 layers BANDERA blown film plant

• Manufacturer: Luigi Bandera

Raw material most commonly used are low density polyethylene (LDPE) and High density polyethylene (HDPE). These are often used in blends with other polymers and additives. Machine has operated for limited amount ...

PHOTOGRAB HELIOS Code 46-14

PHOTOGRAB HELIOS Cod. 46-14 Numerically controlled machine for very high definition reproduction of photographic images and lettering on marble, granite, glass and porcelain by micro-etching. - Entirely built wit...

2009 NEGRI BOSSI VJ160

• Manufacturer: Negri Bossi

AVAILABLE IN THE MILAN AREA Tonnage: 160 | Screw diameter mm (a): 52 | Theoretical vol. (a): 500 | Working hours: 92645 | Mould thickness mm: 170 - 550 | Travel of the moving plane mm: 440 | Column passage mm: 45...

2011 ARBURG 920S 4600-2100 #IN0560

• Manufacturer: Arburg

Machine equipped with an ARBURG MULTILIFT SELECT 15 robot Machine in production, can be viewed in operation, Tunisia area

2009 NEGRI BOSSI VJ160

• Manufacturer: Negri Bossi

AVAILABLE IN THE MILAN AREA Tonnage: 160 | Screw diameter mm (a): 52 | Theoretical vol. (a): 450 | Working hours: 95943 | Mould thickness mm: 170 - 550 | Travel of the moving plane mm: 440 | Column passage mm: 45...

2009 NEGRI BOSSI VJ210

• Manufacturer: Negri Bossi

AVAILABLE IN THE MILAN AREA Tonnage: 210 | Screw diameter mm (a): 52 | Theoretical vol. (a): 500 | Working hours: 95712 | Mould thickness mm: 200 - 630 | Travel of the moving plane mm: 540 | Column passage mm: 51...

1995 PLASTIC METAL MULTIPLA 110 #IN0517

• Manufacturer: PLASTIC METAL

Tonnage: 110 | Pump type: Variable | Screw diameter mm (a): 45 | Robot interface: Euromap 67 | Hydraulic jacks n.: 1 | Air blowers n.: 2 | Electric charge: No | Hydraulic oil: H46 | Oil lubricates: 460 | Control...

1991 3 layers BRUCKNER TOSHIBA BOPP / BOPET extrusion machine

• Manufacturer: Brückner

Biaxially oriented polypropylene (BOPP) and Biaxially oriented polyester (BOPET) are commonly produced in tender-frame lines. In these lines material is melted through a flat extrusion die (T-die) and solidified ...

2008 SML CAST COEX 7

• Manufacturer: SML

Cast film extrusion lines are commonly used to extrude plastic films especially for flexible packaging industry. / In a cast film extruder PE, PP or PA granulates (or other polymers) are melted inro an extruder a...

2012 ENGEL INSERT 200V/80 #IN0166

• Manufacturer: Engel
• Model: Insert

Control: CC-200; Euromap: 200/80; mold thickness: 450 min; moving platen stroke: 357.

2010 HEIDELBERGER SHD 12 PERF0

• Manufacturer: Heidelberg

Pouch machines produce vacuum bags from reels of a film or laminate. These machines may have different constructions depending on the type of pouch they produce. -Perforation knife cutter -seal width 1,5-2 mm -40...

2000 SCHIAVI ECOFLEX

• Manufacturer: Schiavi
• Model: ECOFLEX

Coatings used in packaging industry are various. Cold and hot seal coating are common. Also, cold and hot seal coatings are commonly used, as well as hot melt and wax coatings. Silicon, Pvdc coating, ant mist and...

1998 1 layers BIELLONI film blowing machine

• Manufacturer: Bielloni

Blown film extrusion lines are commonly used to extrude plastic films for flexible packaging industry. Two cooling rings, one for tubulars and one for films Gravimetric system Contrex Corona treater Cason.