Used frames in Illinois, USA

Stainless Specialist Feeder Incline/Cleated 29¾"W X 230"L

• Manufacturer: Stainless Specialist

Stainless Specialists, 29¾" wide x 230" long, inclined cleated conveyor. Equipped with a 20" infeed height, 29¾" wide white plastic conveyor belt with 3" high x 26" wide cleats set on 4" centers. Conveyor has a 2...

Howard Double Arm Mixer

• Manufacturer: Howard

Used- C.E. Howard Double Arm Mixer, Approximate 200 Gallon, 304 Stainless Steel. Non-jacketed bowl approximate 50" left to right x 44-1/8" front to back x 34-1/2" deep. Overlapping sigma blades set up for hydraul...

Tank Processors 10 GALLON

10 gallon, 316 stainless steel, low pressure jacket, process tank. Vessel dimensions: 14" ID x 16½" total depth with a 14" straight wall. Equipped with bolt down lid, magnetic prop agitation powered by a .33 hp d...

Fitzmill Mill Hammer FAS020

• Manufacturer: Fitzmill
• Model: FAS020

Fitzmill, Model FASO20, stainless steel hammer mill with pounds of product per hour – depending on materials and application. Equipped with 12" diameter charge port, (48) fixed stepped impact blades powered by a ...

Axon Shrink Tunnels EZ 36

• Manufacturer: Axon

Axon, Model EZ-36-SR-7-8, stainless steel over the conveyor convection air neck band shrink tunnel, with number of product per minute – depending on materials and application. Total Aperture: 12" in Height; 7-1/2...

TRIpack Shrink Tunnels HT-2

• Manufacturer: Tripack

TRIpack stainless steel over the conveyor convection air neck band shrink tunnel. Product per minute – depending on materials and application. Total Aperture: 12" in Height; 10" in Width. Tunnel: 60" in Length. E...

Fitzmill Mill Hammer DAS06

• Manufacturer: Fitzmill
• Model: DAS06

Fitzmill, Model DAS06, stainless steel hammer mill with pounds of product per hour – depending on materials and application. Equipped with 20" wide x 20" long x 4" deep feed pan, (16) fixed knife / impact blades ...

Cherrys Industrial Equipment Material Handling Pallet Inverter SC75P

• Manufacturer: Cherrys Industrial Equipment C

Cherry’s Industrial, Model SC75P, free standing, single clamp, 180° hydraulic pallet inverter. Load Capacity: up to 4,000 lbs. Equipped with 49" Long x 49" Wide load table, 42" minimum to 75" maximum jaw opening ...

Fitzmill Mill Hammer DAS06

• Manufacturer: Fitzmill
• Model: DAS06

Fitzmill, Model DAS06, stainless steel hammer mill with pounds of product per hour – depending on materials and application. Equipped with 20" wide x 20" long x 4" deep feed pan, (16) fixed knife / impact blades ...

Conveyor Laner RCP2

• Manufacturer: Abbe

Stainless steel, 48" wide x 120" long, belt conveyor with servo controlled laner cylinders. Equipped with a 48" wide x 120" long Neoprene style belt with a 31" to 36" infeed / discharge height powered by a 3 hp c...

TNA Manufacturing Conveyor Vibratory ROFLO-VM3

• Manufacturer: TNA Robag

TNA, model ROFLO-VM3, 304 stainless steel vibratory feeder. Equipped with 52½" long x 17½" wide x 8¾" deep conveyor bed that funnels to 9¾" wide discharge over 23" of length for a total bed length of 75½", 33" in...

Alfa Laval Heat Exch Plate H10-RC

• Manufacturer: Alfa-Laval
• Model: H10-RC

Stainless steel, plate and frame heat exchanger 1217 sq ft. Has 180 total plates 19"W x 55"H ,1/4" Thick divided in (3) sections of (97 plates, 49 plates, 34 plates) maximum working pressure of 145psi, maximum wo...

Tronics Labeler P/S Wrap S30

• Manufacturer: Tronics

Tronics Model S30, stainless steel, open frame, stepper motor, pressure sensitive, wrap labeler rated from 100" to 1,200" of labels per minute – depending on materials and application. Label size range up to: 10"...