Processing » Hiroshima

Building Filters

51

Used generators in Hiroshima, Japan

  • ［Yaskawa Electric Corporation] General-purpose motors

    ［Yaskawa Electric Corporation] General-purpose motors

    • Manufacturer: Daiichi Bussan Co.

    Power: 22Kw4P200V | Material: SS | Quantity saved: 1

    Hiroshima, Japan
  • 2006 Paulec SFP-10

    2006 Paulec SFP-10

    • Manufacturer: Powrex

    Explosion-proof specifications With hot air generator, dust collector, control panel Container capacity: Approx. 21 L (total volume)

    Hiroshima, Japan
  • 2012 Ogawara Works HDS-100

    2012 Ogawara Works HDS-100

    • Manufacturer: 大川原製作所

    Heating capacity: 110kw, Cooling capacity: 81kw Air blowing capacity: 3900Nm3/h, Heat source water volume: 231L/min Manufacturer's introduction page: Remarks Mainly composed of one CO2 hot air heat pump system, ...

    Hiroshima, Japan
  • Nippon Dryer HF-04

    Nippon Dryer HF-04

    • Manufacturer: japan dryer

    Overall dimensions: 2500 x 1100 x 1700H Internal dimensions: 1290 x 790 x 800H = approx. 800L Temperature control: up to 200°C

    Hiroshima, Japan
  • Tokyo Coki MT-CD-2

    Tokyo Coki MT-CD-2

    • Manufacturer: 東京コーキ

    Cooling and drying equipment in which cooling water or hot water is passed through a jacketed stainless steel trough, and cooled and dried as it is moved. The material rises from the lower vane to the upper disch...

    Hiroshima, Japan
  • Shelf dryer

    Shelf dryer

      Steam drying Internal dimensions: W850×D600×H1370 Purchasing area: 60Hz | Quantity saved: 1 | Size: Internal dimensions: W850×D600×H1370

      Hiroshima, Japan
    • 1989 Nishimura Ironworks CD-910

      1989 Nishimura Ironworks CD-910

      • Manufacturer: Nishimura Ironworks

      Heat transfer area 10 m2 Power: 2.2kw | Purchasing area: 60Hz | Material: Disk SB42 | Quantity saved: One

      Hiroshima, Japan
    • 2003 Okawara Kakoki L-8

      2003 Okawara Kakoki L-8

      • Manufacturer: Okawara Kako Kikai Kikai

      Moisture evaporation capacity: 3kg/h Hot air inlet temperature: 250°C, exhaust air outlet temperature: 100°C Disk atomization, parallel flow method Atomizer model: OCA-008B Collection method: Single point collect...

      Hiroshima, Japan
    • 1992 [Oe Kogyo] Cooker conditioner

      1992 [Oe Kogyo] Cooker conditioner

      • Manufacturer: 大江工業

      Paddle type Internal volume: 1.1㎥ Design pressure: 0.2kg / cm2 Design temperature: 200 ℃ With supply conveyor (3.7kw)

      Hiroshima, Japan
    • 2002 Tamagawa Machinery TC-3.5S

      2002 Tamagawa Machinery TC-3.5S

      • Manufacturer: Tamagawa Machinery

      Internal volume: 4.6 m3 Heat transfer area: 62.6 m² Design temperature: 165 ° C Rotation speed: 1.36 to 5.33 rpm Type 2 pressure vessel

      Hiroshima, Japan
    • Shelf dryer

      Shelf dryer

        Steam drying Internal dimensions: W850×D600×H1370 Purchasing area: 60Hz | Quantity saved: 1 | Size: Internal dimensions: W850×D600×H1370

        Hiroshima, Japan
      • Kusumoto Kasei HISPEC HG 220

        Kusumoto Kasei HISPEC HG 220

        • Manufacturer: HiSpec

        可能温度：20℃～200℃ 自重：200Kg メーカーページ　 備考 取扱説明書有り ファンの修理が必要。他は問題ないと元所有先より。

        Hiroshima, Japan
      • ［Ryowa Giken］Box dryer No model

        ［Ryowa Giken］Box dryer No model

        • Manufacturer: 菱和技研

        Delivery date Immediate delivery possible Upper temperature limit ~ 150°C Hot air circulation type. There is a water(?) discharge mechanism on the bottom of the chamber. The bottom of the chamber has a mechanism ...

        Hiroshima, Japan
      • MDR-15 made in China

        MDR-15 made in China

        • Manufacturer: 中国製

        Atomizer type Processing capacity: 15.5kg / h Product water content: 3.5% Electric heater heating

        Hiroshima, Japan
      • ［Atlas Stood] Cooker

        ［Atlas Stood] Cooker

        • Manufacturer: Atlas

        Material: SS | Quantity saved: One

        Hiroshima, Japan
      1234

      Overview

      Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

      FAQ

      What should I consider when buying used processing equipment?

      Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

      How do I arrange shipping for processing equipment?

      Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

      What is the typical maintenance for processing equipment?

      Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.