Processing » Hiroshima

Building Filters

95

Used separator in Hiroshima, Japan

  • 2017 Chikara Engineering HANG48×800

    2017 Chikara Engineering HANG48×800

    • Manufacturer: Tikara Engineering

    Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 796G Scraping device hydraulically driven With control panel

    Hiroshima, Japan
  • 1989 Tanaka Giken Industry AE

    1989 Tanaka Giken Industry AE 55 × 22

    • Manufacturer: Giken

    55-inch SUS Fully automatic type Hydraulic unit (0.75kw) Basket capacity: 430L Rotation speed: 900rpm Centrifugal effect: 600G The entire machine is disassembled and serviced at our maintenance shop, so you can b...

    Hiroshima, Japan
  • Tanabe 42-inch

    Tanabe 42-inch

    • Manufacturer: Tanabe

    42", top discharge type, perforated type. Basket SUS, others SS.

    Hiroshima, Japan
  • Shinryo Manufacturing JU-2

    Shinryo Manufacturing JU-2

    • Manufacturer: Shinryo Manufacturing

    Caliber: 40 × 25 Discharge rate: 4t / h Total head: 80m Rotation speed: 3600rpm

    Hiroshima, Japan
  • Nishigaki UFS

    Nishigaki UFS

    • Manufacturer: Nishigaki

    Flow rate: 0.03 m 3 / min Head: 30 m Aperture: 25 mm

    Hiroshima, Japan
  • 2016 IHI HS-255L

    2016 IHI HS-255L

    • Manufacturer: IHI
    • Model: HS

    4000 rpm/3500 G Nominal capacity: 2.5–3.5 t/h Backdrive specification (can be modified to single-motor specification) Control panel included

    Hiroshima, Japan
  • 1973 Tomoe Kogyo P-3400

    1973 Tomoe Kogyo P-3400

    • Manufacturer: Tomoe kogyo

    30kW 4000rpm/3200G Gear ratio: 1/165 Spare rotor included (gear ratio: 1/52) Click here for a video of the test run (YouTube) after maintenance was completed.

    Hiroshima, Japan
  • 1989 Matsumoto Machinery Works MARK

    1989 Matsumoto Machinery Works MARK III 48 × 30

    • Manufacturer: Matsumoto Machinery Works

    Hydraulic drive (has been converted to motor drive) Capacity: 458L Rotation speed: 1080rpm 800G

    Hiroshima, Japan
  • Tanabe Willtech Z-2L (overflow type)

    Tanabe Willtech Z-2L (overflow type)

    • Manufacturer: Tanabe Willtech

    Main: 3600rpm/3000rpm BD: 3030rpm/2530rpm Differential speed: 10rpm/8.2rpm With spare screw Applications: Suitable for sludge dewatering.

    Hiroshima, Japan
  • Sato S-401G

    Sato S-401G

    • Manufacturer: Sato

    Bore diameter: 40mm Head: 11.5M Liquid flow rate: 110L/min

    Hiroshima, Japan
  • Kotobuki Industry S3-0

    Kotobuki Industry S3-0

    • Manufacturer: Kotobuki Industry

    22kw (explosion-proof motor) 1300～2200rpm 1300G 【Maintained Processing capacity: 5-10m3/H Serviced in 2014 -> In indoor storage Overlay thermal spraying is not performed. Please consult with us.

    Hiroshima, Japan
  • 2006 Kotobuki SC-170

    2006 Kotobuki SC-170

    • Manufacturer: Kotobuki

    Reference treatment volume 6m3(under the condition of sludge concentration 0.91% flocculant used) Maximum centrifugal effect 2000G(Rotation speed 3200min) Deceleration ratio 1/187 Differential speed range 3 to 10...

    Hiroshima, Japan
  • Tikara Engineering 60 × 25

    Tikara Engineering 60 × 25 1/2 type

    • Manufacturer: Tikara Engineering

    Main unit, scraping unit, hydraulic unit Capacity: 610L Rotation speed: 840(600G)~970RPM(800G) During scraping: 11RPM Without control panel and filter cloth. Please contact us for availability. We can provide you...

    Hiroshima, Japan
  • There is no nameplate 24

    There is no nameplate 24 吋

    • Manufacturer: No nameplate

    Basket SUS Casing SS + SUS (side) Upper discharge type The entire disassembly and maintenance is performed at our maintenance shop, so you can be assured of the finish of the mechanical parts as well as the exter...

    Hiroshima, Japan
  • A spiral pump

    A spiral pump

      Confirmation required. Note: No inventory number. (1) Place to put.

      Hiroshima, Japan
    34567

    Overview

    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

    FAQ

    What should I consider when buying used processing equipment?

    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

    How do I arrange shipping for processing equipment?

    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

    What is the typical maintenance for processing equipment?

    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.