Used controller in Germany

SCHNEIDER UNM 410-10-50 W

• Manufacturer: Schneider
• Model: UNM 410-10-50 W

- easy to move thanks to castors and long grill - mobile, V-belt driven piston compressor - Compressor for work up to 10 bar

Unused 150 liter mobile heat-/coolable pharma process vessel, Aisi 316 with magnetic agitator

• Manufacturer: Raff & Grund

max. allowable working temperature: 95 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 95 °C Temperature control cy...

280 liter heat-/coolable pressure tank, Aisi 316

• Manufacturer: Diessel

max. allowable working temperature: 130 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 130 °C Temperature control ...

air compressor

• Manufacturer: Atlas-Copco

Additional title: oil-free scroll compressor | Volume flow at 7,75 bar: 1 m³/min | Volume flow at 4 bar: 1 m³/min | Power: 12,9 kW | Voltage: 400 V | Frequency: 50 Hz | Length: 953 mm | Width: 1207 mm | Height:...

2004 Atlas Copco GX5 FF

• Manufacturer: Atlas-Copco
• Model: GX 5 FF
• Noise level: 75 dB
• Power requirement: 5.5 kW

Condensate separator installed. Restriction: Overload valve does not switch off automatically. For sale as is.

2014 Arburg 470 H 1000-170

• Manufacturer: Arburg

This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load o...

2008 Arburg 470 A 800-170

• Manufacturer: Arburg

This Arburg 470 A 800-170 was manufactured in 2008. A vertical injection moulding machine with a closing force of 80 tons, operating on 400 V 3∼, 50 Hz. It features a total connected load of 69 kVA. Consider the ...

PHÖNIX HOCHVACUUMTECHNIK cooling unit

Cooling unit, heat exchanger, cooler, refrigeration machine PHÖNIX HOCHVACUUMTECHNIK RUDOLSTADT CCS 1000RE rollable, 2 swivel castors with parking brake, 2 fixed castors used, tested !

2005 SUMITOMO SHI DEMAG El-Exis S 250/630-1450

• Manufacturer: Demag

This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 4...

1997 COLİNES CAST-3 LAYER

Film Width: Clorenform max.2100 mm It is also possible to change to 1600mm width. Extruder 1 Layer ref: A, Screw diam: 130 PARS 4 comp Extruder 2 Layer ref: B, Screw diam: 80 PARS 4 comp Extruder 3 Layer ref: C, ...

labeling machine

• Manufacturer: Renner

Labelling machine for neck, body and back labelling of glass bottles.

10000 liter insulated mixing tank with side-mounted immersion heater

• Manufacturer: Behälter KG

notice: some residues of previous content, bump at the insulation jacket remarks: metal sheet cut outs in the upper bottom (see pictures); 2 electr. plug-in heaters (without guarantee of function)

1991 Venjakob injection molding machine 99855

• Manufacturer: Venjakob
• Model: LEISTENSPRITZMASCHINE

Control: Program | Workpiece width min-max mm: 10-300 | Workpiece length min- max mm: 400-3000 | Workpiece height min- max mm: 8-60 | Working width max mm: 300 | Total spray heads: 4 | Workpiece recognition: Yes...

Venjakob jet dryer 100824

• Manufacturer: Venjakob

Workpiece width min-max mm: 1300 | Workpiece length min- max mm: 150 | Length mm: about 13,000 | Inspection flaps: Yes | Housing thermally insulated mm: Yes | Canal temperature degrees: about 60 | Exhaust fan kw...

2013 Engel Insert 200V/60 rotary

• Manufacturer: Engel
• Model: Insert

This Engel Insert 200V/60 rotary was manufactured in 2013. A vertical injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Engel Insert 20...