Used frames in Germany

Cylindroconical tanks [4 pieces]

• Manufacturer: Holvrieka

Insulated and clad stainless steel tanks standing on upright frames, each with three frame cooling zones and one cone cooling zone.

plate heat exchanger

• Manufacturer: thermowave

Single-stage plate heat exchanger, previously used for wort cooling in a 15 hl brewhouse. Flow rate product approx. 10 hl/h. Inlet temperature 75°C, outlet temperature 20°C. Cooling water temperature approx. 13°C.

Plate filter

• Manufacturer: Schenk Filterbau GmbH

Sheet filter with square filter elements hanging vertically, arranged row. Hydraulic filter sheet press. Control of the hydraulics from the built-in electrical control panel.

Cylindroconical fermentation and storage tanks (CCTs) [7 pcs.]

• Manufacturer: GROSS Behälterbau

Insulated, cylindroconical stainless steel tanks with three shell cooling zones and one cone cooling zone. Previously used as beer storage tanks.

Cooling plant

• Manufacturer: vbw-weihenstephan

NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery ...

Fermentation tank

Flat conical stainless steel fermentation tank for approx. 40 hl net content.

refrigerating plant

• Manufacturer: Joh. Albrecht

Ice water generator for cooling supply of wort cooler (2nd stage), fermentation cellar (= 100 hl capacity), storage cellar (= 320 hl capacity) and pressure tanks (= 260 hl capacity) in a microbrewery with 20 hl o...

plate heat exchanger

• Manufacturer: VBW Weihenstephan

Additional title: wort cooler | Capacity: 150 hl/h | Pressure: 6 bar | Max. temperature: 100 °C | Length: 2550 mm | Width: 900 mm | Height: 2000 mm | Weight: 1080 kg | Material: stainless steel | Base constructi...

plate heat exchanger

• Manufacturer: VBW Weihenstephan

Additional title: wort cooler | Capacity: 150 hl/h | Pressure: 6 bar | Max. temperature: 100 °C | Length: 2550 mm | Width: 900 mm | Height: 2000 mm | Weight: 1080 kg | Material: stainless steel | Base constructi...

NH3 separator

Ammonia separator (from a refrigeration system with max. 180 kW) with 2 chambers 1 x for ice water and brewing water cooling to = +0.5°C 1 x for glycol cooling to = -10°C (=extension) Brewing water cooler (53 kW)...

Cylindro-conical fermentation and storage tank (CCT) [4 pcs.]

• Manufacturer: GROSS Behälterbau GmbH

Cylindroconical 580 hl fermentation and storage tank - glycol cooling, 4 cooling zones (1 x cone, 3 x cylinder) - swivel cone - stainless steel - insulated - support skirt

cylindro-conical fermentation and storage tanks (CCT) [7 pcs.]

• Manufacturer: Nordhausen

7 vertical indoor fermentation tanks Additional title: vertical, coolable tanks from stainless steel | Max. content: 2500 l | Max. pressure: 1 bar | Max. temp.: 50 °C | Width: 1366 mm | Height: 3820 mm | Weight: ...

Cylindro-conical fermentation and storage tank (CCT) [4 pcs.]

• Manufacturer: GROSS Behälterbau GmbH

Cylindroconical 580 hl fermentation and storage tank - glycol cooling, 4 cooling zones (1 x cone, 3 x cylinder) - swivel cone - stainless steel - insulated - support skirt

plate heat exchanger

• Manufacturer: Sondex

Two-stage plate heat exchanger for cooling wort. Approximately 10 hl of wort can be cooled in one hour. In the first stage (pre-cooler), the wort is cooled from 96°C to 15°C (while simultaneously heating the bre...

Pressure tanks

• Manufacturer: Speidel

2 vertical pressure tanks with jacket cooling Additional title: vertical, coolable stainless steel tanks | Max. content: 8578 l | Max. pressure: 3 bar | Width: approx. 1.9 m | Height: approx. 4.3 m | Material: st...