Processing » Gauteng

Building Filters

346

Used Processing in Gauteng, South Africa

  • Automatic Programmable Mortar Mixer (UTCM-0885E)

    Automatic Programmable Mortar Mixer (UTCM-0885E)

      Strength Tests The Automatic Programmable Mortar Mixers are supplied complete with: Bowl, 5 lt (approx.) Beater Product Code: Description: The mixers have been designed to mix mortars and cement pastes primarily ...

      Alberton, South Africa
    • Manuel Mortar Mixers (UTCM-0875E)

      Manuel Mortar Mixers (UTCM-0875E)

        Strength Tests The Manual Mortar Mixers are supplied complete with: Bowl, 5 L (approx.) Beater Product Code: Description: The UTCM-0875 Manual Mortar Mixer has a 5 litre (approx.) capacity, they have been designe...

        Alberton, South Africa
      • Three Gang Mould (UTCM-0892.2)

        Three Gang Mould (UTCM-0892.2)

          Strength Tests Product Code: Description: All moulds have been manufactured from steel except UTCM-0898 moulded using engineered plastic and all internal surfaces are machined. Minimum surface hardness of UTCM- 0...

          Alberton, South Africa
        • Vibrating Machine (UTCM-0930)

          Vibrating Machine (UTCM-0930)

            Strength Tests Product Code: Description: The UTCM-0930 Vibrating Machine is used for the preparation and compaction of 70.7 mm mortar cube specimens. The mould table is mounted on four springs attached to an ecc...

            Alberton, South Africa
          • Slaking Vessel (UTCM-0681)

            Slaking Vessel (UTCM-0681)

              Compression and Flexural Machines UTCM-0681 Slaking Vessel is used to determine the yield of lime by leaving the lime sample to slake into. Stainless steel made and double walled insulated. The cylinder has insid...

              Alberton, South Africa
            • Centrifuge Extractor (UTAS-0030)

              Centrifuge Extractor (UTAS-0030)

                Analysis of Bituminous Mixtures Product Codes: Description: The Centrifuges are used for the determination of the bitumen percentage in bituminous mixtures. All models comprise a removable precision-machined roto...

                Alberton, South Africa
              • MUFFLE FURNACE – LABORATORY (LES-LM

                MUFFLE FURNACE – LABORATORY (LES-LM RANGE)

                  The LES Laboratory Muffle Furnace range is designed with the exacting requirements of the laboratory environment in mind. State of the art control systems ensure consistent and reliable results. Our tried and tes...

                  Alberton, South Africa
                • Holiday / Spark Detector for

                  Holiday / Spark Detector for Anti-Corrosion Coatings on Metal (LES-HD60B)

                    Clear backlit LCD display of output voltage Used for quick non-destructive inspection of porosity, pinholes and other faults in non-conductive coatings and linings on metal substrates Output voltage: Pulsed 0.5 ...

                    Alberton, South Africa
                  • Hand Operated Hydraulic Specimen Extruder

                    Hand Operated Hydraulic Specimen Extruder (UTGE-0082)

                      Laboratory Testing The UTGE-0082 Hand Operated Hydraulic Extruder is designed for extruding specimens from 50mm (2”) to 125mm (5”) (outer dia.) shelby sample tubes and moulds such as proctor, CBR and marshall mou...

                      Alberton, South Africa
                    • Motorized Hydraulic Specimen Extruder, Horizontal

                      Motorized Hydraulic Specimen Extruder, Horizontal Type, 60 kN Capacity (UTGE-0084)

                        Laboratory Testing 2050x500x1250 (shipping) The UTGE-0084 Motorized Hydraulic Extruder, Horizontal Type, is designed for extruding specimens from 50mm (2”) to 125mm (5”) (outer dia.) shelby sample tubes and mould...

                        Alberton, South Africa
                      • Motorized Hydraulic Specimen Extruder Vertical

                        Motorized Hydraulic Specimen Extruder Vertical Type (UTGE-0086)

                          Laboratory Testing The UTGE-0086 Motorised Hydraulic Extruder, Vertical Type, is designed for extruding specimens from 50mm(2”) to 125mm(5”) (outer dia.) shelby sample tubes and moulds such as proctor, CBR and...

                          Alberton, South Africa
                        • Jolting Table (UTCM-0890)

                          Jolting Table (UTCM-0890)

                            Strength Tests Product Code: Description: Jolting Table is used for compacting of cement specimens in 40x40x160 mm mould and consists of mould table seated on a rotating cam driven at 60 r.p.m. The falling height...

                            Alberton, South Africa
                          • Curing Cabinet (UTCM-1100)

                            Curing Cabinet (UTCM-1100)

                              Strength Tests Product Code: Description: The UTCM-1100 Curing Cabinet is used for curing of cement, concrete or other cement-based mortar specimens. The curing cabinet provides (20 ± 1) °C temperature and over 9...

                              Alberton, South Africa
                            • Test Jigs for Compression and

                              Test Jigs for Compression and Flexure (UTCM-4200A)

                                Compression and Flexural Machines Product Code: Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.

                                Alberton, South Africa
                              • Tensile Adhesion Strength Test Apparatus

                                Tensile Adhesion Strength Test Apparatus (UTCM-4223)

                                  Compression and Flexural Machines Product Code: Description: UTCM-4223 Tensile Adhesion Strength Test Apparatus can be fitted to the UTEST Cement Compression or Compression/Tension testing machines. This apparatu...

                                  Alberton, South Africa
                                1314151617

                                Overview

                                Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

                                FAQ

                                What should I consider when buying used processing equipment?

                                Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

                                How do I arrange shipping for processing equipment?

                                Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

                                What is the typical maintenance for processing equipment?

                                Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.