Processing » Florida

Search By Category

Search By Manufacturer

Building Filters

552

Used processing machines in Florida, USA

  • Trusted Seller
    Hanger

    Hanger

      Description: Hanger Reference: APC2014 Mold Size: 20.2" x 16.2" x 10" Mold Weight: 1,200 lbs Cavities: 2 Runner: Cold Product Size: 14.5" x 10.8" Product Weight: 28 g Material: PS Machine Required: 250 Ton Notes:...

      Miami, FL
    • Trusted Seller
      7" Comb

      7" Comb

        Description: Comb 7" Reference: KP-527 / 500274 Mold Size: 19" x 12" x 7.9" Mold Weight: 460 lbs Cavities: 6 Product Size: 7" Notes: Mold tested on 250 Ton Van Dorn Machine.

        Miami, FL
      • Trusted Seller
        Desk Tray Organizer

        Desk Tray Organizer

          Description: Desk Tray Reference: 02-432 Mold Size: 25.5" x 19.5" x 12.5" Mold Weight: 2,000 lbs Cycle: 25 Sec Cavities: 1 Runner: Hot Product Size: 18.5" x 10.7" x 1" Product Weight: 427 g Material: PS Machine r...

          Miami, FL
        • Trusted Seller
          Ice Cube Tray - 16

          Ice Cube Tray - 16 cubes

            Description: Ice Cube Tray - 16 Mold Size: 15.5" x 11.8" x 11.2" (ht) Mold Weight: 456.3 lbs Cycle: 16 - 18 Cavities: 1 Runner: Cold Product Size: 10.8" x 4.53" x 1.58" (ht) Product Weight: 82 gr Material: LLDPE ...

            Miami, FL
          • Royo Machinery RB-42

            Royo Machinery RB-42

            • Manufacturer: Royo Machinery

            Warm up time: less than 1 second, Voltage: 115/220V 60Hz, Tape width: 30 mm, Speed: 26 pcs/min, Power supply: AC 220V - 200W, Standard Paper Tape: (30mm x 150M/roll) Thickness: 0.12mm, Paper tape for optional st...

            Miami, FL
          • Royo Machinery KYZ-101

            Royo Machinery KYZ-101

            • Manufacturer: Royo Machinery

            Voltage: 115/220V 60Hz, Power: 0.62 kW, Min. packing size: 100 x 30mm, Max. opening: 1500 mm, Dimensions: 2245 x 700 x 1550 mm, Specifications are subject to change without notice

            Miami, FL
          • Trusted Seller
            Hanger 7.5"

            Hanger 7.5"

              Description: Hanger 7.5" Reference: KP-H518 - 500271 Mold Size: 41.5" x 20" x 14.5" Mold Weight: 3,065 lbs Cavities: 8 Runner: Cold Product Size: 7.5" Product Weight: 12.5 g Material: PS Machine Required: 250 Ton...

              Miami, FL
            • 2025 Royo Machinery RB-42

              2025 Royo Machinery RB-42

              • Manufacturer: Royo Machinery

              Warm up time: less than 1 second, Voltage: 115/220V 60Hz, Tape width: 30 mm, Speed: 26 pcs/min, Power supply: AC 220V - 200W, Standard Paper Tape: (30mm x 150M/roll) Thickness: 0.12mm, Paper tape for optional st...

              Miami, FL
            • 2004 Bunn TP-202

              2004 Bunn TP-202

              • Manufacturer: Bunn

              Electrical: 110V 60 Hz, Band tape auto adding, Max. Package Size: Any size, Net Weight: 85 kg, Strap Tension: Adjustable from 15 to 45 kg, Strap width: 6 9 12 & 15 mm

              Miami, FL
            • Trusted Seller
              Versa-Mill VM-600

              Versa-Mill VM-600

                One (1) used Versa-Mill model VM-600. Stainless Steel Construction, cantilever design. Three (3) speeds 1000/2450/4600 RPM. 3 Phase/ 220-380V/ 60Hz/ Hp

                St. Petersburg, FL
              • Trusted Seller
                Hanger 13" mold

                Hanger 13" mold

                  Description: Hanger 13" Reference: 03-194 Mold Size: 20" x 12" x 10" Cavities: 2 Product Size: 13" Machine Required: 150 Ton

                  Miami, FL
                • Trusted Seller
                  9" Comb

                  9" Comb

                    Description: 9" Comb Reference: KP-523 - 500273 Mold Size: 23.5" x 13" x 8.5" Mold Weight: 664 lbs Cavities: 4 Runner: Cold Product Size: 9" Product Weight: 24 g Material: PP Notes: Mold tested Mold in good condi...

                    Miami, FL
                  • Trusted Seller
                    Hanger 14"

                    Hanger 14"

                      Description: Hanger 14" Reference: 30-16 Mold Size: 16.5" x 29.5" x 10.25" Cycle: 20 Sec Cavities: 4 Product Size: 14" Product Weight: 70 g Machine Required: 300 Ton

                      Miami, FL
                    • Royo Machinery RBJ-D800GS

                      Royo Machinery RBJ-D800GS

                      • Manufacturer: Royo Machinery

                      Compressed air: 0.2m3/min 0.5-0.7Mpa, Weight: 2.1t, Corrugated board: E-flute., Speed: 80-200 pcs/min, Power: 5kW, Folding angle: 5 to 40 degrees, Dimensions: 3600 x 1400 x 1700 mm, Corrugated: up to 1.5mm, Tilte...

                      Miami, FL
                    • Royo Machinery RSW-1000

                      Royo Machinery RSW-1000

                      • Manufacturer: Royo Machinery

                      Weight: 1100 kg, Production Speed: 10-35 m/min, Max number of grooves: 9 at a time, Groove distance: 0-830mm, Groove angle: 80-140 degrees adjustable, Carton width: 100-890mm, Carton length: 100-950mm, Cardboard ...

                      Miami, FL
                    1415161718

                    Overview

                    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

                    FAQ

                    What should I consider when buying used processing equipment?

                    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

                    How do I arrange shipping for processing equipment?

                    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

                    What is the typical maintenance for processing equipment?

                    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.