Used brands in Flevoland, Netherlands

LETS Economy

• Manufacturer: lets

Material Stainlesssteel 304 Brush length 600 / 900 / 1200 mm Length 1100 / 1400 / 1700 mm Height 1550 mm Options Fencing, Empty alarms, Clocking system, Double action Width 940 mm

Foam tank

Material Stainless steel 304 Capacity 60 L Options swivel wheels

SRHF 650 (DV)

8,0 m3 Period capacity at 10 DH 52-77 m3 Salt use in renegration 20-50 kg Capacity of saltcellar 307 kg Resin content 200 L

SRHF 1100 (DV)

14,0 m3 Period capacity at 10 DH 91-134 m3 Salt use in renegration 35-88 kg Capacity of saltcellar 370 kg Resin content 350 L

JR 800 (DV)

10,0 m3 Period capacity at 10 DH 65-96 m3 Salt use in renegration 25-63 kg Capacity of saltcellar 370 kg Resin content 250 L

Hot water cleaner HWBi

Capacity pump unit 15 l/m Continuous power 11.1 l/m by 60℃ - 23,3 l/m by 40℃ Maximum load boiler 43 kW Max. pressure 150 bar Electric power 4 kW

Compressed air catalyst

By applying the BEKOKAT compressed air catalyst , the compressed air becomes suitable for direct use on unpackaged products. Use of compressed air in high-care environments also becomes possible because the compr...

Component washer

• Manufacturer: LETS

The LETS component washer is a very sound, robust unit. This unit is very different from other conventional units. If there are many oil-containing products (batteries, engines etc.) that require cleaning, we off...

KALLFASS Picolo ( small shrink tunnel)

• Manufacturer: Kallfass

KALLFASS Picolo with a small heating zone, looks good and works as it should …..EXTRA: build on the rear a product cooler. There is also still such a sweet little tunnel in a green color.With new drive chains, ...

Hugo BECK HSL 612-25

• Manufacturer: Beck

Hugo BECK HSL 612-25 shrink tunnel. Shrink tunnel with a heating zone of 120 cm. Entrance dimensions max. 600 x 25 cm. Complete with new drive chains and sprockets and axles. Bearings are renuwed and new materia...

KALLFASS NT700 side sealer….

• Manufacturer: Kallfass

KALLFASS NT700 complete with shrink tunnel. Machine was already in a very good condition . Despite the good condition of the machine we still have replaced the conveyor belts for new white ones. In the operating...

Good working BVM compacta 4010.

• Manufacturer: Compacta

BVM compacta 4010 , the machine was very dirty but functions OK.We cleaned it up , replaced the sealing bar for a new one. In- and outfeed convoyor units are completely overhauled and the belts where renuwed. And...

Hugo BECK HSL 618-25

• Manufacturer: Beck

Hugo BECK HSL 618-25 shrink tunnel. Shrinktunnel with a long heating zone up to 180 cm. Dimensions entrance max. 600 x 25 cm. Well maintained machine.The two blower motors had new bearings . EXTRA: the machine is...

Oil/water separator

Oil-lubricated compressors produce large quantities of oil-containing condensate. This is categorised as chemical waste. By applying an oil/water separator, the condensate can be directly disposed of in the sewer...

Filters

Compressed air requirements can differ per sector. The LETS compressors by default come with a preliminary filter and a 3 micron fine filter. Additionally, it is possible to expand the compressor with an after-fi...