Used pumps in Emilia-Romagna, Italy

I.mec eps fd /eps id elettropompa sommersa

• Manufacturer: I.mec

Submersible centrifugal pumps with bottom suction, model EPS-FD and EPS ID, are specially constructed for transferring highly abrasive liquids such as: ceramic slips, glazes, dirty water with suspended solids, sl...

I.mec epo-fd elettropompa orizzontale aspirazione frontale trasmissione diretta

• Manufacturer: I.mec

Horizontal direct centrifugal pumps model EPO-FD are specially constructed for transferring highly abrasive liquids such as: ceramic slips, glazes, dirty water with suspended solids, slurry, sand, grit, scales fr...

I.mec epo-id elettropompa orizzontale aspirazione inversa trasmissione diretta

• Manufacturer: I.mec

Horizontal direct centrifugal pumps with reverse suction, model EPO-ID are specially constructed for transferring highly abrasive liquids such as: ceramic slips, glazes, dirty water with suspended solids, slurry,...

I.mec pompe verticali centrifughe

• Manufacturer: I.mec

Suitable for conveying high-density, abrasive and corrosive liquids even with suspended solids by centrifugal pumping action. Applications: Particularly suitable: in ceramics along glazing lines for feeding bells...

I.mec pmpe- pompe per esterni

• Manufacturer: I.mec

Model | Dimensions A/B/C/E/F/L mm Sizes | HP | speed | Flow rate It/min . kg/min Delivery Caudal MD65 PE | 151/576/50/220.5/994/(1 1/4") | 0.5/1 | 1400 | 60/100 MD85 PE | 157/576/50/319/1019/(1 1/2") | 1.5/2.5 | ...

I.mec flojet

• Manufacturer: Flojet

Brand | Pipe Size " Dimensiones " | prtata - delivery - caudal MAX lt/min FLOJET | 3/8" | 22.7

I.mec sand piper e wilden

• Manufacturer: Wilden

Brand | Pipe Size " Dimensiones " | prtata - delivery - caudal MAX lt/min SANDPIPER | 3/8" | 35 e | 1/2" | 52 WILDEN | 1" | 170 1,2" | 400 2" | 640 3" | 900

2020 VER5302 – Complete Sludge Dewatering line

• Manufacturer: Hiller

Complete sludge dewatering line Technical data decanter: Preparation capacity polymer unit: 1000 l/h from 0,1% to 0,5% solution Capacity polyer preparation pump: 60 – 1200 l/h Sludge parameter:

1998 Sulzer Z-V50T-2

• Manufacturer: Sulzer

Capacity: 30.000 l/min | Prevalence: 18 m

VER4667 – 2900 mm Board Machine

Installed in the ’60s Completely renewed in 1992 (replaced the side parts of the wet section, totally rebuilt the hood of the drying section, and added 6 dryer cylinders) Hood by Valmet Bono boiler 12 t/h, 10 bar...

1971 VER4578 – 2680 mm Beloit Tissue Machine, 65 tpd

• Manufacturer: Beloit

DCS made by ABB Major rebuilds in 1984 (drying system) and 2004 (Yankee Cylinder) Scope of Supply: Valmet Yankee Cylinder installed NEW in 2004 (diameter 4580 mm) Suction press: 78 kN/m, blind press: 80 kN/m Gas ...

1998 VER5397 – 2750 MM CRESCENT FORMER TISSUE MACHINE

• Manufacturer: ACelli

8 40 0 m/min 4 to 23 GSM Capacity: 70 ton/day AC/ DC-440V) Napkins, Facials, Toilet and Kitchen Valmet , others Yankee Cylinder: CURRENTLY IN FULL PRODUCTION Video avaliable on request Rewinder Max. width: 2750 m...

1998 VER5396 – 2750 MM CRESCENT FORMER TISSUE MACHINE

• Manufacturer: ACelli

Hood Drive type: Siemens DC DCS: Siemens S7-400 Yankee Cylinder: CURRENTLY IN FULL PRODUCTION Video avaliable on request Rewinder:

I.mec gruppi carrellati per scarico mulino con pompe elettriche grc+var

• Manufacturer: I.mec

The GRC+VAR Wheeled Unit is particularly suitable for use in ceramic industries, in grinding departments at the discharge of glaze mills or tanks, in raw material preparation departments at the discharge of disco...