Processing » Czech Republic

Building Filters

50

Used the system in Czech Republic

  • Trusted Seller
    2016 KEMPER System 8000

    2016 KEMPER System 8000

    • Manufacturer: Kemper
    • Model: SYSTEM 8000

    4 filters Cooling performance: 3 kW | Supply voltage: 400 V | Airflow: 4000 m³/h | Current consumption: 6.5 A | Machine weight: 590 kg

    Brno, Czech Republic
  • Trusted Seller
    Kram Rewinding Machine

    Kram Rewinding Machine

    • Manufacturer: Kram

    Operating system: E 200

    Brno, Czech Republic
  • Trusted Seller
    2002 EURO MASIV EMP 65

    2002 EURO MASIV EMP 65

    • Manufacturer: EURO MASIV

    Control system: Siemens | Machine weight: 4300 kg

    Brno, Czech Republic
  • Trusted Seller
    2022 AERZEN VML 25

    2022 AERZEN VML 25

    • Manufacturer: Aerzen

    Control system: AERtronic | Hours on: 20000 h | Efficiency: 24.17 m³/min | Nominal power: 90 kW | Machine weight: 2098 kg

    Brno, Czech Republic
  • Trusted Seller
    2018 EXTOR 4100 IP/5,5 kW

    2018 EXTOR 4100 IP/5,5 kW

    • Manufacturer: EXTOR

    Control system: Siemens | Power-on hours: 1545 h | Power input: 5.5 kW | Length: 1000 mm | Height: 2615 mm | Width: 1000 mm | Machine weight: 280 kg

    Brno, Czech Republic
  • Trusted Seller
    2024 SECO/WARWICK VP

    2024 SECO/WARWICK VP

    • Manufacturer: SECO/WARWICK

    Control system: Siemens S7-1500FS series | Maximum temperature: 1300 C | Internal dimensions: 1500 x 1700 x 1700 mm | Capacity: 3000 kg | Operating vacuum: 5x10-2 mbar

    Brno, Czech Republic
  • Trusted Seller
    1995 ARBURG ALLROUNDER 520C 2000

    1995 ARBURG ALLROUNDER 520C 2000

    • Manufacturer: Arburg
    • Model: Allrounder 520

    Characteristic: Control system: Dialogic Total hours: 58337 h Hours on: 52223 h Clamping force: 200 t Distance between the columns (horizontal): 520 mm Distance between the columns (vertical): 520 mm Screw diamet...

    Brno, Czech Republic
  • Trusted Seller
    2016 MicroStep AquaCut 3001.20WB

    2016 MicroStep AquaCut 3001.20WB

    • Manufacturer: MicroStep
    • Model: AQUACUT 300120WB

    Control system: iMSNC | Software: Apser 3.5 - Basic Module | Hours on: 37500 h | Length of the working table: 3000 mm | Width of the working table: 2000 mm | High pressure pump: Hypertherm 50 OEM (4100 bar) | Cu...

    Brno, Czech Republic
  • Trusted Seller
    1995 Battenfeld BA 250/50 Plus

    1995 Battenfeld BA 250/50 Plus

    • Manufacturer: Battenfeld

    Control system: Unilog 1020 | Clamping force: 250 kN | Injection capacity: 49 cm³ | Injection weight: 44.6 g | Height of the plate for mounting the mold: 470 mm | Width of the plate for mounting the mold: 280 mm...

    Brno, Czech Republic
  • Trusted Seller
    1991 Battenfeld 350 CD

    1991 Battenfeld 350 CD

    • Manufacturer: Battenfeld

    Equipment: Spare parts Control system: UNILOG 4000 | Clamping force: 350 kN | Screw diameter: 30 mm | Injection capacity: 84.8 cm³ | Injection weight: 77.1 g | Height of the plate for mounting the mold: 450 mm | ...

    Brno, Czech Republic
  • Trusted Seller
    2005 Arburg 820S-4000-3200

    2005 Arburg 820S-4000-3200

    • Manufacturer: Arburg
    • Model: 820 S 4000-3200

    This Arburg 820S-4000-3200 was manufactured in 2005. It features a clamping force of 4000 kN, a screw diameter of 90 mm, and a shot weight of 1860 g. The machine operates with a SELOGICA control system and has a ...

    Czechia
  • Trusted Seller
    2001 NABERTHERM S396/65

    2001 NABERTHERM S396/65

    • Manufacturer: Nabertherm

    Switching and control system with program controller

    Brno, Czech Republic
  • Trusted Seller
    Packaging line

    Packaging line

    • Manufacturer: ApecAstro

    Semi-automatic system Dosing range 2-30 kg Hopper capacity of the dosing device Receiving hopper with vibrator for emptying big bags Discharge conveyor for automatic filling of the storage hopper of the dosing de...

    Brno, Czech Republic
  • Trusted Seller
    2009 Koplast VL 1750

    2009 Koplast VL 1750

    • Manufacturer: Koplast

    Equipment: Technical books The machine is equipped with: Upper and lower heating panel with digital control BECKER vacuum system Continuously adjustable table lift Manual and automatic control mode Suitable for p...

    Brno, Czech Republic
  • Trusted Seller
    2022 IBS Scherer VM/St

    2022 IBS Scherer VM/St

    • Manufacturer: Scherer Feinbau

    The offer includes: Washing table WM catch basin Liquid Quick (200 liters) The IBS parts cleaning system of the MD type was specially developed for manual brush cleaning of parts contaminated with oil and grease ...

    Brno, Czech Republic
1234

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.