Processing » Czech Republic

Building Filters

10

Used dry in Czech Republic

  • Trusted Seller
    Degreasing plant

    Degreasing plant

      - Degreasing is chemical only - Degreasing by pump jet - For handling there is a crane at the ceiling - The total built-up area of the complex and equipment is 9M x 4.2M x 4M

      Brno, Czech Republic
    • Trusted Seller
      2019 Amboss Langbein D2x8 ECO

      2019 Amboss Langbein D2x8 ECO S7

      • Manufacturer: Amboss Langbein

      Power consumption: 7 kW

      Brno, Czech Republic
    • Trusted Seller
      2016 GN Canada GN1406TM

      2016 GN Canada GN1406TM

      • Manufacturer: GN Canada

      Equipment: Cooling device EURO CHILLER GC A 015 Extensions for plastic coffee lids (80mm) The machine is after overhaul of the main shaft and engine

      Brno, Czech Republic
    • Trusted Seller
      Wittmann DRYMAX-PRIMUS E30-70

      Wittmann DRYMAX-PRIMUS E30-70

      • Manufacturer: Wittmann

      Dry air supply 30m3/h 1 heating process 1.6 kW 2 heating process for regeneration and 0.8 kW Total installed input 2.8 kW Minimum drying temperature 80°C Maximum drying temperature 130°C Dew point up to -40°C

      Brno, Czech Republic
    • Trusted Seller
      2005 Varnishing line

      2005 Varnishing line

        The line consists of: Curing oven (natural gas) GALATEK Powdering system ITW Gema AG AS0 2 Drying room (natural gas) GALATEK Spray booth GALATEK PKPF Mini Filter cabinet GALATEK AA.U.

        Brno, Czech Republic
      • Trusted Seller
        2011 Plastmashines Germany PROVITE 2000/120

        2011 Plastmashines Germany PROVITE 2000/120

        • Manufacturer: Plastmashines Germany

        Line assembly: Main control and monitoring panel Mixing/homogenizing hopper Motors Extruder Vacuum pump for degassing Melt filters Closed water cooling and pellet drying system Discharging silo Storage feeding ho...

        Brno, Czech Republic
      • no-image_en.png

        2017 COLINES ALLrollEX1500CFC/150

        • Manufacturer: Colines

        foil width: 1500 mm number of layers: 5 Material: LLDPE, mLLDPE quantity of film produced (Kg/h): : 500 kg/h the machine is in good technical condition. Not running. Can be shown in dry cycle Processing 1 Single ...

        Sedliště, Czech Republic
      • Norclean industrier a.s. Bb114 NEL3R

        Norclean industrier a.s. Bb114 NEL3R

        • Manufacturer: Norclean industrier a.s.

        vacuum unit NEL3R Max. vacuum 2150 mmWC (21.5 kPa) maximum air flow rate 460 Nm3 / h 230 V voltage power input of 2.4 kW connection type single phase frequency 50 Hz IP44 classification launch method directly noi...

        Blansko, Czech Republic
      • Aerodynamic dryer sawdust A-600

        Aerodynamic dryer sawdust A-600

          Principle of operation: The fan built into the dryer creates a vacuum. The raw material is supplied to the piping system by means of a screw feeder. It is then sucked in by an air stream. The furnace particles wi...

          Jasenná, Czech Republic
        • no-image_en.png

          Rotary press MASA-HENKE including finishing line

          • Manufacturer: Henke

          Rotary press MASA-HENKE including finishing line The line is in good condition. The line consists of: - Rotary press-Karusel MASA-HENKE UNI 2000/600/7/3900 - Washing equipment - Stacker/destecke...

          Znojmo, Czech Republic

        Overview

        Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

        FAQ

        What should I consider when buying used processing equipment?

        Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

        How do I arrange shipping for processing equipment?

        Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

        What is the typical maintenance for processing equipment?

        Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.