Used Processing in Baden-Württemberg, Germany

Trusted Seller
Engelsmann Doppelpaddelmischer 2500/500
- Manufacturer: Engelsmann
double shaft mixer Material: stainless steel | Drive: 7,5 kW | Conveyor length: 2850 mm | Conveyor width: 500 mm | Material: stainless steel | Engine: 7,5 kW | Convey length: 2850 mm | Convey width: 500 mm
Mannheim, Germany
Trusted Seller
1970 Pallmann PP 6
- Manufacturer: Pallmann
- Model: PP6
Impact plate mill - finest powders without the use of nitrogen best flow behavior, high bulk density and narrow grain distribution - low grinding temperature thanks to optimal air flow - fully automatic conti...
Mannheim, Germany
Trusted Seller
Machauer Hammermühle HMF N7,5
- Manufacturer: HMF
Hammer mill Mass: 110 kg | Drive: 7,5 KW | Material: Length 2000mm x Width 1300mm x Height 3100mm | Material: Stahl / steel | Engine: 7,5 kW | Weight: 110 kg
Mannheim, Germany
Trusted Seller
1994 Hosokawa Micron BV TorusDisc TDJS 630 - 3.15
- Manufacturer: Hosokawa
--> Disc dryer; The TorusDisc dryer/heater/cooler is an indirect heat exchanger with mechanical transport of the material. It works batchwise as well as continuously, with indirect heating, or for cooling or to ...
Mannheim, Germany
Trusted Seller
Alpine B 315 U
- Manufacturer: Alpine
Mill Material: Mild steel | Material: Mild steel
Mannheim, Germany
Trusted Seller
Werner & Pfleiderer UK 12 AU3
- Manufacturer: WP
--> Double Z kneader with discharge screw; Material: Mild steel | Drive: 15 kW | Content: 110 ltr | Mass: 3000 kg | Length x width x height: 2600 mm x 1600 mm x 1800 mm | Drive snail: 7,5 KW | Length x width x he...
Mannheim, Germany
Trusted Seller
Alpine Rotoplex 50 / 63 Ro
- Manufacturer: Alpine
granulator Drive: 45 KW / 380 V. | Mass: 1750 kg | Length x width x height: 1800 mm x 1350 mm x 3000 mm | Rotor diameter - blade circle: 500 mm | Rotor length: 630 mm | Rotor speed: approx. 650 min-1 | Rotor run-...
Mannheim, Germany
Trusted Seller
AMK Doppel-Z-Kneter - IVU, Kippkneter
- Manufacturer: MINOX Maschinenhandels GmbH
--> Double Z-kneader with tilting device. Drive: 26 kW | Content: 650 ltr | Trough dimensions: L 1010 mm x W 1110 mm x H 1040 mm | Overall dimensions:: L 3300 mm x W 2000 mm x H 2000 mm | Length x width x height:...
Mannheim, Germany
Trusted Seller
Alpine 250 CW
- Manufacturer: Alpine
Pin mill Mass: 1100 kg | Length x width x height: 1800 mm x 500 mm x 1800 mm | Drives: Housing 15 KW + door 7.5 KW | Weight: 1100 kg | Length x width x height: 1800 mm x 500 mm x 1800 mm
Mannheim, Germany
Trusted Seller
Make Offer
2021 Arburg Allrounder 630A 2500-800/
- Manufacturer: Arburg
- Model: Allrounder 630
Arburg Allrounder 630A Multi Component Plastics Injection Moulding Cell (2021) with Inspection & SAR Automation with SAR workpiece full tray infeed and empty tray return Epson LS10-B803S take off robot Kist + Esc...
Radolfzell, Germany
Visit Auction Website
Trusted Seller
Sandblasting system MHG SMG 45K
- Manufacturer: SMG
MHG SMG 45K Sandblasting System -Working area 1000x600x750mm -Work gloves -Two side doors, dust-tight closure -Double-walled, sound-insulated foam -On/off extraction and lighting -Pressure regulator, pressure gau...
Bruchsal, Germany
Trusted Seller
ZERMA GSC 300/600 #14003
- Manufacturer: Zerma
Schallschutz Cross section approx.300 x 600 mm Use: Plastic; Wood | Rotor diameter: 300 mm | Rotor width: 600 mm | Rotor knives: 3×2 | Stator knives: 3 | Motor drive: 18,5 kW
Zuzenhausen, Germany
Trusted Seller
ZERMA GS 300-200 N #12979
- Manufacturer: Zerma
Cross section approx. 220 x 320 mm Use: Plastic | Rotor diameter: 300 mm | Rotor width: 200 mm | Rotor knives: 3 | Stator knives: 3 | Motor drive: 5,5 kW
Zuzenhausen, Germany
Trusted Seller
Belt conveyor #13069
- Manufacturer: Other Manufacturer
Belt width 500 mm Usable belt width 340 mm Axle distance 4200 mm Side wall hight 150 mm 1,5 Kw Cleats 60 mm high, 300 mm interval
Zuzenhausen, Germany
Trusted Seller
Herbold FA 3000
- Manufacturer: Herbold
Rotor diameter = 500 mm Rotorwidth = 3000 mm Motor drive = 18,5 kW
Zuzenhausen, Germany