Processing » Catalonia

Building Filters

28

Refurbished Processing in Catalonia, Spain

  • Trusted Seller
    1999 BACHILLER STAINLESS STEEL BACHILLER

    1999 BACHILLER STAINLESS STEEL BACHILLER MIXER MILL

    • Manufacturer: Bachiller

    Fan beater mill operates with a mobile disc with wear-resistant hard steel plates. Usable on two edges, against a static track. It is considered cold milling due to the high air flow it generates. Equipped with ...

    Barcelona, Spain
  • Trusted Seller
    2002 BACHILLER UB-315

    2002 BACHILLER UB-315

    • Manufacturer: Bachiller

    Jacketed beater mill manufactured by BACHILLER Voltage: 230/400 V | Power: 0.25 kW | Freqüence: 50 Hz | Speed: 665 rpm | Material: 316/316L stainless steel

    Barcelona, Spain
  • Trusted Seller
    1973 LODIGE FKM 2000D

    1973 LODIGE FKM 2000D

    • Manufacturer: Lödige

    Lodige FKM2000D mixer with a total volume of 2000 liters made of 321 stainless steel. Two inspection doors with a completely reconditioned 55 kw gear motor. Transport dimensions of the reducer group: Length 2000...

    Barcelona, Spain
  • Trusted Seller
    COMTEIFA COMTEIFA FT-12-B CENTRIFUGE

    COMTEIFA COMTEIFA FT-12-B CENTRIFUGE

    • Manufacturer: COMTEIFA

    Used vertical axis basket centrifuge with top discharge with bag mounted on three feet (with braces and compression springs). Model FT-12-B manufactured by COMTEIFA. All parts in contact with the product are ma...

    Barcelona, Spain
  • Trusted Seller
    KRAUSS MAFFEI KM125

    KRAUSS MAFFEI KM125

    • Manufacturer: Krauss-Maffei

    Vertical axis basket centrifuge with bottom discharge with scraper mounted on reconditioned inertia plate. Model KM 125 manufactured by KRAUSS MAFFEI. All parts in contact with the product are made of AISI 316L...

    Barcelona, Spain
  • Trusted Seller
    ALFA LAVAL MAB206S

    ALFA LAVAL MAB206S

    • Manufacturer: Alfa-Laval
    • Model: MAB 206

    Completely reconditioned Alfa Laval MAB206S vertical centrifuge with stainless steel bowl, use for mineral oil, manual centrifuge for the expulsion of solids. +/- 10,000 l/h (Hydraulic) Motor 7.5 Kw 220/380 V 143...

    Barcelona, Spain
  • Trusted Seller
    COMTEIFA REFURBISHED COMTEIFA DT-2-BD CENTRIFUGE

    COMTEIFA REFURBISHED COMTEIFA DT-2-BD CENTRIFUGE

    • Manufacturer: COMTEIFA

    Vertical axis basket centrifuge for pilot plant with top discharge with bag mounted on reconditioned inertia plate. Model DT-2-BD manufactured by COMTEIFA. Metal construction based on steel and 316 L stainless s...

    Barcelona, Spain
  • Trusted Seller
    GEA WESTFALIA SA 7-06-076

    GEA WESTFALIA SA 7-06-076

    • Manufacturer: GEA
    • Model: SA

    Plate centrifuge manufactured by GEA WESTFALIA, model SA 7-06-076, with a power of 5.5 kW. Includes 3 thermistors manufactured by THERMGUARD, model P120, with an operating temperature of 120ºC.

    Barcelona, Spain
  • Trusted Seller
    1992 GEA WESTFALIA CSA 1-06-475

    1992 GEA WESTFALIA CSA 1-06-475

    • Manufacturer: GEA
    • Model: CSA 1-06-475

    Dish centrifuge made of stainless steel by WESTFALIA. Self-cleaning bowl design that can be sterilized by steam. Approximate capacity of 13 liters. With WESTFALIA controls. On stainless steel structure with whe...

    Barcelona, Spain
  • Trusted Seller
    2005 ALFA LAVAL BRPX 817

    2005 ALFA LAVAL BRPX 817

    • Manufacturer: Alfa-Laval
    • Model: BRPX

    Clarifying centrifuge manufactured by ALFA LAVAL, model BRPX 817. Capacity: up to 20,000L/h with a pulp input of 12% and output of 1.5%. New electrical panel in stainless steel with frequency converter and PLC w...

    Barcelona, Spain
  • Trusted Seller
    1970 LODIGE FKM 2000D

    1970 LODIGE FKM 2000D

    • Manufacturer: Lödige

    Mixer made of 321 stainless steel using plow blades and has 4 chopper agitators in the body. With jacket for heating or cooling with two pneumatic outlet valves, liquid addition system. Two inspection doors with ...

    Barcelona, Spain
  • Trusted Seller
    COMTEIFA FT-12-B

    COMTEIFA FT-12-B

    • Manufacturer: COMTEIFA

    Used vertical axis basket centrifuge with top discharge with bag mounted on three feet (with braces and compression springs) prepared for weekly rentals. With the possibility of ATEX equipment. Model FT-12-B ma...

    Barcelona, Spain
  • Trusted Seller
    NX418

    NX418

    • Manufacturer: Unbekannter Hersteller

    REFURBISHED MODEL NX 418 DECANTER. Carbon steel platform, with fixings on the 4 legs for anchoring to the ground. Carbon steel frame, fixed by silent-block to the platform. Lateral engine support with belt tensio...

    Barcelona, Spain
  • Trusted Seller
    1987 MORTON MACHINES CO FM-130-D

    1987 MORTON MACHINES CO FM-130-D

    • Manufacturer: MORTON MACHINES CO

    Morton mixer model FM-130 -D made of 316L stainless steel with plow blade-type agitation and a chopper in the body. An inspection door with flange for product entry and inerting system or option for adding liquid...

    Barcelona, Spain
  • Trusted Seller
    COMTEIFA FT-12-B

    COMTEIFA FT-12-B

    • Manufacturer: COMTEIFA

    Used vertical axis basket centrifuge with top discharge with bag mounted on three feet (with braces and compression springs). Model FT-12-B manufactured by COMTEIFA. All parts in contact with the product are ma...

    Barcelona, Spain
12

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.