Processing » Canada

Building Filters

143

Used f p in Canada

  • Trusted Seller
    SMALL CONVEYOR ALUMINIUM16.5L X 3.5W

    SMALL CONVEYOR ALUMINIUM16.5L X 3.5W 2.5H w/gearmotor vf30f2p63b5 ,dfr63m4

    • Manufacturer: STAINLE STEEL

    SMALL CONVEYOR Stainless SteeL16.5L X 3.5W 2.5H w/gearmotor vf30f2p63b5 ,dfr63m4

    $500 USD
    Montreal, Canada
  • 3/8" Npt filter P32FB93EGAN

    3/8" Npt filter P32FB93EGAN

      -Shipping dimensions: Width 2 1/2" x Height 7 1/2" x Length 2 1/2" -Max Pressure: 10.3 bar (1.00 MPa) (150 psi) -Max temperature: 52 c (120f)

      Brant, Canada
    • Powder Coat Curing System –

      Powder Coat Curing System – Model HO-6000-P

        Powder Coat Curing System – Model HO-6000-P This high-temperature 6,000-watt, 36″ width portable unit is designed for curing standard 400°F powders without the need for an enclosed oven. – Achieves spot curing at...

        $864 USD
        Toronto, Canada
      • Infrared Powder Coat Coatings Curing

        Infrared Powder Coat Coatings Curing System – Model HO-6000-P

          Powder Coat Curing System – Model HO-6000-P This high-temperature 6,000-watt, 36" width portable unit is designed for curing standard 400°F powders without the need for an enclosed oven. Adjustable surface temper...

          $864 USD
          Toronto, Canada
        • Trusted Seller
          HUBBELL HBL420P9W

          HUBBELL HBL420P9W

          • Manufacturer: Hubbell Wiegmann

          🔌 Hubbell HBL420P9W – Watertight Pin & Sleeve Plug The HBL420P9W is a heavy-duty 20 Amp, 250V AC, 3-phase male plug from Hubbell's IEC 60309 series. Built for industrial environments, it delivers reliable electr...

          $252 USD
          Delson, Canada
        • Trusted Seller
          Used Pyradia Oven, 500 Deg.F

          Used Pyradia Oven, 500 Deg.F

          • Manufacturer: PYRADIA

          -manufacturer: pyradia -model: r4p302430tct -max temperature : 500 deg.f -power requirements: 600 volt, 3 phase -chamber volume: 29.5'' wide x 24'' deep x 38'' high -overall dimensions: 48'' wide x 51.5'' lo...

          Saint-Jérôme, Canada
        • Trusted Seller
          2019 Shanklin Sealed Air Sealer

          2019 Shanklin Sealed Air Sealer wrapper model f7ac with shrink tunnel model t81 #7322

          • Manufacturer: Sealed Air

          SHANKLIN SEALED AIR, WRAPPER MODEL F7AC WITH SHRINK TUNNEL MODEL T81 Wrapper Sealer Model F7AC Serial No. FAC 18024-01: 208 volts, 30 fla, 1ph, 60hz,10ka, 90psi, 30 inch largest load up to 14 Inches height, over...

          Montreal, Canada
        • Trusted Seller
          HEAT EXCHANGER MAX W.P 100PSI

          HEAT EXCHANGER MAX W.P 100PSI @ 220-DEG F

            2 X MUELLER PLATE HEAT EXCHANGER MAX W.P 100PSI @ 220-DEG F S/N 274070-3, 274070-4 MODEL AT402-C/F 20 NAT BOARD # 32948, 32949 1000.00 EACH

            $1,000 USD
            Red Deer, Canada
          • Trusted Seller
            HEAT EXCHANGER MAX W.P 100

            HEAT EXCHANGER MAX W.P 100 PSI @ 220-DEG F

              2 X Mueller PLATE HEAT EXCHANGER MAX W.P 100 PSI @ 220-DEG F S/N 274070-1, 274070-2 P/N 9814104 $1000.00 EAh

              $1,000 USD
              Red Deer, Canada
            • Trusted Seller
              YOUNGTOUCHSTONE HIF-724-H05-1P-F-CN

              YOUNGTOUCHSTONE HIF-724-H05-1P-F-CN

              • Manufacturer: Young Touchstone

              $3,114 USD
              British Columbia, Canada
            • AIC P-Line Sanitary Heat Exchangers

              AIC P-Line Sanitary Heat Exchangers

              • Manufacturer: AIC

              Characteristics FDA, cGMP, ASME, and 3A requirements Stainless Steel 316 construction Double tubesheet construction Construction without dead spots, minimizing possibility of microbial growth Polished to Ra < 0.5...

              Oakville, Canada
            • Trusted Seller
              1991 120" FWKO 75 PSI

              1991 120" FWKO 75 PSI 121°F

              • Manufacturer: I.P. CONSTRUCTORS

              FWKO, Package id: 62065570 | Service type: Sweet | Pasc condition rating: B | Skidded: Yes | Housed: Yes | Connection status: Connected | Units available: 1 | Diameter: 120" | Diameter(unit of measure): inches | ...

              Saskatchewan, Canada
            • Trusted Seller
              POWER STRAP 5.F.3/4.I.J.P

              POWER STRAP 5.F.3/4.I.J.P

              • Manufacturer: POWER STRAP

              $648 USD
              British Columbia, Canada
            • Trusted Seller
              2004 F.LLI FERRARI FA 717

              2004 F.LLI FERRARI FA 717 P4A RD 100LA/2P B3 RD270

              • Manufacturer: Ferrari
              • Phase type: Three-phase

              Horsepower: 4 hp | Voltage: 230/460 volts | Phase: 3-phase

              $1,260 USD
              British Columbia, Canada
            • Trusted Seller
              DONALDSON P574958

              DONALDSON P574958

              • Manufacturer: Donaldson / Torit / DCE

              Connection: 11/2" SAE 4-Bolt | Filter quantity: 2 | Max. flow range: 125 gpm / 473 lpm | Fluid compatibility: All diesel fuels and lubricants | Working pressure: 350 psi / 2413 kPa / 24.1 bar | Rated pressure bu...

              $374 USD
              British Columbia, Canada
            12345

            Overview

            Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

            FAQ

            What should I consider when buying used processing equipment?

            Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

            How do I arrange shipping for processing equipment?

            Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

            What is the typical maintenance for processing equipment?

            Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.