Used side in Canada

10 Gallon Hopper

• Manufacturer: Steep Hill Equipment Solutions

Hopper: 13″ diameter x 25″ deep, volume approx 1o gallon or 1.7 cu.ft. Straight side: 22.5″ Outlet: 2.75″ diameter, with flange: 3.5″

FMC Syntron F010-B Vibratory Feeder

• Manufacturer: FMC Syntron

Electromagnetic vibratory feeder. Pan: 20″L x 7″W, sides: 2.5″H Maximum capacity approx 4 tons per hour based on granular material weighing 100 lbs per cubic foot.

Equipment Platform

• Manufacturer: Steep Hill Equipment Solutions

Platform: 49.5″L x 45.25″W x 42″H Side open frames: 26.25″L x 13.75″W Motor mount: 9.5″L x 7.5″W

Ametek Rotron Regen Blower

• Manufacturer: AMETEK Powervar

Ametek Rotron Regenerative Blower – 13.5″ Fan, 14″ Housing, 510318 Motor The Ametek Rotron regenerative blower is designed for applications requiring high airflow at low pressure or vacuum. Air is pressurized us...

Commercial 28' Elevated Shaker Conveyor

• Manufacturer: Commercial Mfg

Stainless steel shaker conveyor, with two overlapping pans, stands 5 feet off the ground on solid steel posts. Pan 1: 174″L x 29.5″W, bottom at right is 75″ from ground. Pan 2: 166″L x 29.5″W, bottom at left is 6...

Lidded Cone-Bottom Tank

Stainless steel tank with lid, approx 180 gallons. Diameter: 35.5, straight side: 42.5″, cone: 19.5″ slope, bottom tri-clamp: 1.5″ Overall depth: 49.5″ (Removable) extensions on legs: 11″

Domino M230i Print and Apply Case Labeler

• Manufacturer: Domino Printing Sciences

Domino M230i Print and Apply Case Labeler The M230i-T6 label installer is designed to be both flexible and adaptable for label printing and installation. - Mounting on top, side or bottom - Installation distanc...

SS Lidded Cone-Bottom Tank

Stainless steel tank with lid, approx 180 gallons. Diameter: 35.5, straight side: 42.5″, cone: 19.5″ slope, bottom tri-clamp: 1.5″ Overall depth: 49.5″ Slight dent at top of tank as shown in photos.

Syri 8' Modular Conveyor

• Manufacturer: Syri

Belt: 94″L x 9″W, work height: 55.75″ Side panels: 5.5″H, one 72″L, the other 96″L Powered by a Sterling 1.2 hp electric motor and a hollow-shaft right angle reducer.

Paglierani 4' Long Conveyor

• Manufacturer: Paglierani

Modular belt: 46″L x 21.5″W, working height: 19.5″ Adjustable side rails: 6″H, one 39″L, the other 40″L Powered by a Leeson Electric 1 hp motor and a Bonfiglioli gearbox. 2643 KT2

Highlight Magnum 2300 Case Sealer

• Manufacturer: Highlight

Case Sealer – Dual Belt Drive with Magnum 200 Series Tape Heads This high-performance case sealer is designed for consistent, uniform sealing of a wide range of case sizes. Featuring dual side belt drives and Ma...

Arrowhead 12' Twin-Belt Conveyor

• Manufacturer: Arrowhead

Twin belts: 143″L x 7.5″W, spaced 1″ apart. Work height: 26.5″ Side panel: 109.5″L x 4″H On/off switch (on switch broken but still works). Comes with a motor and a Dodge Tigear gear reducer. condition: Good

Vibratory Feed Hopper

• Manufacturer: Steep Hill Equipment Solutions

Hopper: 36″L x 36″W, straight side: 10½”H, slope 18″ Lid: 40″ x 40″ Infeed height: 41″ Equipped with an Eriez vibratory feeder and a Dayton Fume Exhauster powered by a 3/4 hp electric motor. 2667 KT1

Emplex PB-1 Fill & Seal Bagger

• Manufacturer: Emplex
• Phase type: Single-phase

The Emplex PB-1 is an automatic filler and sealer for small sized pre-made pouches. It comes with a manual for an identical unit called the Europack J. Needs a takeaway conveyor positioned front & center. Fill h...

8.5' High Z-Style Incline Conveyor

Belt: 178″L x 15.5″W, usable width: 12.25″, slope: 138″L Infeed height: 13.75″, drop height: 101″ Cleats: 12″W x 2″H, spaced 7.5″ apart Side rails: 3.25″H Requires a motor to operate.