Processing » British Columbia

Building Filters

27

Used force in British Columbia, Canada

Trusted Seller
Caloritech 5 kW Forced Air Heater
Caloritech Forced Air Heater. Basic unit with factory installed contactor and adjustable thermostat. 5 adjustable air flow louvres. 17,000 BTU/hr. 480 CFM. 14m³/minute. 600V/3 Phase. Caloritech forced air heater ...
Savona, Canada
Trusted Seller
Caloritech 17,000 BTU Forced Air Heater
Caloritech Forced Air Heater. Basic unit with factory installed contactor and adjustable thermostat. 5 adjustable air flow louvres. 17,000 BTU/hr 480 CFM. 14 m³/minute. 600V/3 Phase. Mounting bracket available. C...
Savona, Canada
Trusted Seller
Caloritech 30kW Forced Air Heater
Caloritech 30 kW Forced Air Heater. 10 available. 102360 BTU/hr. 1500 cfm. 43 m³/minute. 600V, 3 phase. Shipping information: Dimensions (L x W x H): 22 in. x 24 in. x 20 in. 56 cm x 61 cm x 51 cm. Weight: 100 lb...
Savona, Canada
Trusted Seller
Caloritech 25kW Forced Air Heater
Caloritech 25 kW Forced Air Heater. 1 available. 85,300 BTU/hr. 1,500 cfm. 43 m³/minute. 600V, 3 phase Shipping information: Dimensions (L x W x H): 22 in. x 24 in. x 20 in. 56 cm x 61 cm x 51 cm. Weight: 100 lbs...
Savona, Canada
Trusted Seller
Caloritech 20 kW Forced Air Heater
Caloritech 20 kW Forced Air Heater. 8 available. 68240 BTU/hr. 1260 cfm. 37 m³/minute. 600V, 3 phase. Shipping information: Dimensions (L x W x H): 22 in. x 24 in. x 20 in. 56 cm x 61 cm x 51 cm. Weight: 100 lbs ...
Savona, Canada
Trusted Seller
Caloritech 15kW Forced Air Heater
Caloritech 15 kW Forced Air Heater. 8 available. 51,180 BTU/hr. 1,040 cfm. 29 m³/minute. 600V, 3 phase. Shipping information: Dimensions (L x W x H): 22 in. x 24 in. x 20 in. 56 cm x 61 cm x 51 cm. Weight: 100 lb...
Savona, Canada
Trusted Seller
Caloritech 40kW Forced Air Heater
Caloritech 40 kW Forced Air Heater. 9 available. 136,480 BTU/hr. 1500 cfm. 43 m³/minute. 600V, 3 phase. Shipping information: Dimensions (L x W x H): 22 in. x 24 in. x 20 in. 56 cm x 61 cm x 51 cm. Weight: 100 lb...
Savona, Canada
2014 Engel e-mac 310/105 US
- Manufacturer: Engel
- Model: E-MAC 310105 US
Upgrade your production with the high-performance ENGEL e-mac 310/105 US all-electric injection molding machine. This state-of-the-art machine is engineered for precision, efficiency, and reliability, making it t...
$95,000 USD
Get financing
Est. $1,788/mo
Richmond, Canada
Trusted Seller
(New) Hy-G P12 Centrifugal Concentrator
Hy-G P12 Centrifugal Gravity Concentrator provides exceptional recovery of super fine alluvial placer gold and other minerals and metals and can continuously concentrate up to 24 hours before clean-out is require...
Savona, Canada
Trusted Seller
1988 SUNDS DEFIBRATOR PFC-400
- Manufacturer: SUNDS DEFIBRATOR
Press force, final pressing: max 4.6 MN (460 tons) | Press force, partial pressing: 0.7-4.6 MN | Stroke, press stamp, max: 1850 mm | Stroke, lower press table, max: 700 mm | Stroke, bale ejector: 1000 mm | Feed-...
$288,126 USD
Get financing
Est. $5,423/mo
British Columbia, Canada
Trusted Seller
Uras KEE-13-6B Vibrator
85 kW 575 Volt 60 Hz Vibrating force: 13 Kilonewtons
British Columbia, Canada
Trusted Seller
Global Mfg. Pneumatic Vibrators
Four bolt mounting 2 Available New surplus Cfm: 13 – 33 | Psi: 20 - 80 | Force: 350 - 715 lbs | Weight: 11 lbs.
British Columbia, Canada
Trusted Seller
Carrier 2 ft. x 9 ft. Vibrating Pan Feeder
Dual Vibrator Units 230/460 Volt 1728 RPM 3350 Watts Discharge Either End
British Columbia, Canada
Trusted Seller
2006 JOINPACK S-313D
- Manufacturer: Joinpack
Strapper type: Other | Packing speed: 2.5 seconds/ time | Tightening force: 15-45 kgs | Applicable bandwidth: 6-15 mm (adjustable) | Desktop: 780 mm | Power supply voltage: 110 V/ 60 Hz, single phase | Power con...
$612 USD
British Columbia, Canada
Trusted Seller
1994 BATTENFELD BA 600/200 CDC
- Manufacturer: Battenfeld
- Model: BA 600200 CDC
- Phase type: Three-phase
Clamping unit Injection unit Electric and Hydraulic Equipment
$15,847 USD
Get financing
Est. $311/mo
British Columbia, Canada

12

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.