Used cip tanks in Bremen, Germany

5100 liter Cip-tank, Aisi 304

• Manufacturer: Rieger

remarks: Diameter Manhole appr. 420 mm; 1 of the tanks with a spray ball, the end of the outlet cut off and a smaller dent in the upper cylinder area; with a total height of approx. 4.400 mm, this tank is also sl...

1250 liter insulated Cip-tank, Aisi 304

remarks: Slight differences in the design of the two tanks; dents in the insulation jacket of the lower bottom; 1 tank also has 1 dent in the insulation jacket in the cylinder area (this tank also lacks the spray...

8000 liter tank, Aisi 304

remarks: pipelines inside the tanks; in the case of one tank the outlet is cut off; the other tank was re-welded in several places on the central cylinder weld

6000 liter tank, Aisi 304

• Manufacturer: Ritter (HBB Hildesheimer Behälterbau)

remarks: Manhole diameter 420 mm; 1 tank slightly lower in total height; Butterfly valves of the outlets defective; Various pipes on the tanks (mostly cut off)

5000 liter tank, Aisi 304

remarks: Manhole diameter approx. 390 mm; 1 overflow pipe and short pipes from external connections inside the tank (see photos); 2 height-adjustable screws of the feet are missing

12000 liter tank, Aisi 304

max. allowable working temperature: 95 °C Volume: 12.000 liter | Stand type: legs height adjustable | Quantity legs: 4 Piece | Diameter inside: 2.200 mm | Cylindrical height: 3.500 mm | Total height: 5.000 mm | M...

6100 liter tank, Aisi 304

remarks: pipelines inside the tank (see photos); diameter manhole approx. 400 mm

2900 liter heatable tank, Aisi 316

notice: some residues of previous content, manhole cover is missing material temperatur control system: stainless steel

8000 liter insulated agitator tank, Aisi 304,with blade stirrer and CIP-sprayball system

remarks: Minor dents in the iso jacket; some small cracks in the weld seams of the feet (see photos); 1 vessel with type plate (the outlet of this vessel has been cut off) agitator features: Vessels with differen...

2000 Liter heat-/coolable tank, Aisi 304

Temperature control cylinder (dj): half-coil temperature control bottom (dj): thermoplate notice: some residues of previous content, bump at the insulation jacket, pipe end cut flush remarks: Cone height approx. ...