Used bottom plate in Bremen, Germany

3660 liter pressure tank with conical lower bottom in Aisi 316

• Manufacturer: Coelho

max. allowable working temperature: 85 °C remarks: differences in design (see pictures); type plates are only available for 1 tank; cone height appr. 800 mm; hand hole 350 mm in the upper bottom

8300 liter coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside each tank; 1 manhole approx. 340 x 440 mm in the front bottom; feet partially padded (see photos) material temperatur control system: AISI 304 (V2A) 1.4301

6050 liter coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet padded (see photos) material temperatur control system: AISI 304 (V2A) 1.4301

8750 liter coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

• Manufacturer: G + R W. Ortmann GmbH & Co. KG

remarks: 2 cooling plates each inside the tanks; 1 manhole approx. 300 x 400 mm in the front bottom; feet fitted with loose, height-adjustable screws (possibly no longer available for all feet; screws were not in...

10460 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; smaller dents in the upper bottom; smaller dents in the upper bottom; feet partially supported with stainless steel p...

13650 liter heat-/coolable cubic storage tank, Aisi 304 with 3 internal cooling plates

remarks: 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 300 x 400 mm in the front bottom; smaller dents in the upper bottom material temperatur control system: AISI 304 (V2A) 1.4301

11320 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; 1 side wall slightly pushed inwards material temperatur control system: AISI 304 (...

10468 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; stated total height is estimated; foot ends were cut off during dismantling and ar...

12280 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in foot length (take into account during installation) material temperatur control system: AISI 30...

12220 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom material temperatur control system: AISI 304 (V2A) 1.4301

6200 liter horizontal pressure tank, Aisi 304

• Manufacturer: Martin Rosa KG

remarks: 1 manhole approx. 320 x 420 mm in the front bottom (the manhole cover of 1 tank is missing); the type plate of 1 tank is missing; front bottom marbled on the outside; foot ends partially cut off, total h...

300 liter agitator tank (powder mixer), Aisi 316 with propeller agitator

remarks: Manhole diameter approx. 410 mm; Support ring and plate on the outside of the lower bottom made of Fe; Grayish protective coating on the outside

Stainless steel container 7 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, with conical bottoms, with eccentric Z-stirrer from above, approx. 2.2 kW, approx. 40 rpm. Pillow plates around the cylinder and lower bottom, designed for operating press...

60000 Liter heat-/coolable pressure tank, Aisi 304

• Manufacturer: Schleifenbaum & Weber

max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 250 °C temperature control bottom (dj): half-coil manhole: in the cylinder, in...

Stainless steel container 30 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height adjustable, with conical bottoms, Z-stirrer eccentric from above, 11 kW, 33 rpm, with bottom bearing, 2 baffles, half-pipe coil on the cylinder, pillow plates on th...