Used ~4' x in Belgium

Thermal radiation (4x)

Thermal radiation (4x)

Metal drying rack (4x)

Dimensions approx. 155x105x190cm

Twin shake-out 2 p. 4 x 2,5m

• Manufacturer: Küttner

2 motors SCHORCH, type: KA7280MCB018Z, 55 kW, 985 rpm, 500 V Twin shake-out grid with two times 2 out-of-balance axles and 2 motors

Twin shake-out grid KÜTTNER, 2 pieces 4 x 2,5 m

• Manufacturer: Küttner

Two motors, 55 kW, SCHORCH, type KA7280MCB018Z, 985 rpm, 500 V Twin shake-out grid with 2 x 2 out-of-balance axles and 2 motors

2018 Pouring installation HWS P-20-R; 4 x ladles 2t

• Manufacturer: HWS

With 4 ladles and 2 ladle lids Pouring time stationary: 17kg/s; synchronised: 8kg/s Max acceleration with synchronised movement to the moulding system: 0.25m/s2 With SIEMENS S7 control cabinet and GLS2010 monitor...

8 Ingots moulds 2 x ±4l

Dimensions: Length: 1100 mm, width: 300 mm; height: 230 mm Internal dimensions bottom: 150 x 110 mm; top: 220 x 370 mm with round trunions, 1 side with square pin in suplement for tilting Without support construc...

“Fed” Drum Coater

for dry coatings all stainless steel belt width 400 mm adjustable speed min. 300 gr coating material adjustable angle fom 0 to 8° belt width 300 mm Elevating spiral screw

"Inotec" Twin shaft paddle mixer 2000L Type IPM 2000

• Manufacturer: Inotec

all stainless steel twin shaft paddle mixer intermeshing mixer 1 front discharge guard 18 kW

Induction furnace JUNKER 2x 4t

• Manufacturer: Junker

Crucible dimensions: Ø780mm; height: 1475mm Melting and holding warm possible at the same time With 2 loading conveyors With 2 water pump stations With hydraulic unit With control cabinet SIEMENS S5 control With ...

“Inotec” Twin shaft paddle mixer Type IM 6000

• Manufacturer: Inotec

all stainless steel twin shaft paddle mixer intermeshing mixer 1 front discharge guard 23 kW, 400V / 50 Hz

Sand silo 19m³

Dimensions: Ø2400mm; height: 9600mm Useful dimensions: Ø2400mm; height: 5000mm without cone With fill level probe With silo filter With railing and access ladder

Eurocargo 190 E 26

• Gross weight: 19,000 kg
• Emission class: Euro 5

Fire: Iveco | Euro standard: EURO 5 | Transmission: Manual 6 | Axles: 4x2 | Km: 348005 | Cylinder: 5880 | Additional information: 13500 L 5 compartments | Wheel base: 4004 | Suspension 1: Suspension spring | Sus...

Premium 280

• Gross weight: 19,000 kg
• Axle configuration: 4x2

Fire: Renault | Transmission: Automatic gearbox 12 | Axles: 4x2 | Km: 643354 | Cylinder: 10837 | Additional information: 14000L 5 comp | Wheel base: 4004 | Suspension 1: Suspension spring | Suspension 2: Suspens...

TGM 15.250

• Emission class: Euro 5
• Axle configuration: 4x2

Fire: Man | Euro standard: EURO 5 | Transmission: Automatic gearbox 6 | Axles: 4x2 | Km: 255189 | Additional information: 11000L 4 comp | Wheel base: 3603 | Suspension 1: Suspension spring | Suspension 2: Suspen...

Gassing unit LAEMPE - LG15 CB

• Manufacturer: Laempe / Röperwerk

With display for operating pressure, flushing pressure and operating pressure valves