Building Filters
- Trusted Seller
Liquid iron analyser Digitemp-E
Brand: Electro-Nite, Type: DTE-A-50; Serial number: 014402 Exterior dimensions: Length 240mm x Wide 200mm x Height 145mm Power 21VA With foot for cups with last Calibration certificat in german
Amel, Belgium - Trusted Seller
Liquid iron-steel analyser HERAEUS Quick Lab
- Manufacturer: Heraeus - Hanau - Vötsch
Type : Digitemp E QLE-DTE ASO for wall mounting for carbon and silicon analysis With "cup" holder External dimensions: Length: 440mm, Wide: 200mm, Height: 160mm Power 21VA Line 230 VAC/50-60Hz
Amel, Belgium - Trusted Seller
Ingot 10 steel trestles for residual liquid max +- 400 C°
- Manufacturer: Stahl
10 moulds with a volume of ±3l External dimensions: Length: 1500mm; Width: 750mm; Height: 800mm Mould dimensions: Length: bottom: 550mm; Length: top: 640mm; width at top: 110 mm; width at bottom: 30 mm Fold back ...
Amel, Belgium 
2013 Clint CWW/K/WP 453-P water cooled liquid chiller
- Manufacturer: Clint
- Model: CWW
NEW !! Never been used. Clint CWW/K/WP 453-P Cold carrier: Water | Cooling agent: R410A | Cooling power: 149,5 KW | Temperature of condensation: 30/35 degrees C | Temperature of the cold carrier: 7/12 degrees C |...
Aalst, Belgium- Trusted Seller
2019 Dosing system for core sand mixer SEGAB
- Manufacturer: Segab
Dimensions: Length: 1200mm; Width: 500mm; Height: 2000mm 2 x pumps: Cantoni; Type: SKH80-8B2 ; 3,15l/min Consisting of:
Amel, Belgium - Trusted Seller
2019 Dosing system for core sand mixer SEGAB
- Manufacturer: Segab
Dimensions: Length: 1200mm; Width: 500mm; Height: 2000mm 2 x pumps: Cantoni; Type: SKH80-8B2 ; 3,15l/min Consisting of:
Amel, Belgium - Trusted Seller
2019 Dosing system for core sand mixer SEGAB
- Manufacturer: Segab
Dimensions: Length: 1200mm; Width: 500mm; Height: 2000mm 2x pumps: Cantoni; Type: SKH80-8B2 ; 3,15l/min Consisting of:
Amel, Belgium - Trusted Seller
Core sand mixing installation STEFFENS ±2t/h
- Manufacturer: STEFFENS
System consisting of mixer, hopper, transfer trolley and dosing station for resin and hardener Mixer: External dimensions: Length: 700 mm; Width: 900 mm; Height: 1500 mm Usable dimensions: Ø600 mm; Depth: 460 mm ...
Amel, Belgium - Trusted Seller
Gasing unit LÜBER LW-FDA-825; 8kW
- Manufacturer: Lüber
- Model: LW-FDA 825
With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter
Amel, Belgium - Trusted Seller
Gasing unit LÜBER LW-FDA-825; 8kW
- Manufacturer: Lüber
- Model: LW-FDA 825
With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter
Amel, Belgium - Trusted Seller
Compressor ATLAS COPCO GA75FF 763m³/h
- Manufacturer: Atlas-Copco
- Model: GA 75
External dimensions: Length: 2000 mm; Width: 1000 mm; Height: 1950 mm
Amel, Belgium - Trusted Seller
Induction furnace JUNKER 2x 4t
- Manufacturer: Junker
Crucible dimensions: Ø780mm; height: 1475mm Melting and holding warm possible at the same time With 2 loading conveyors With 2 water pump stations With hydraulic unit With control cabinet SIEMENS S5 control With ...
Amel, Belgium - Trusted Seller
2002 Gravity die casting machine IMR C60X
- Manufacturer: IMR
Dimensions: Length: 3150mm; Width: 2500mm; Height: 1960mm 6KW; 400V; 50Hz Max opening of clamping plates: 700mm, side stroke: 335mm Hydraulic tank: 200l, max pressure: 60bar With 2 split dip tanks With light barr...
Amel, Belgium - Trusted Seller
Steep conveyor belt for chips
Dimensions: Length: 1100mm; Width: 640mm; Height: 900mm 0,25kW On wheels Belt consisting of metal plates
Amel, Belgium - Trusted Seller
Compressor ATLAS COPCO GA55FF 605m³/h
- Manufacturer: Atlas-Copco
- Model: GA 55
External dimensions: Length: 2000 mm; Width: 1000 mm; Height: 1950 mm
Amel, Belgium
