Used controller in Belgium

Dust Collector NEUBERG JKE26, 4000 m³/h

• Manufacturer: NEUBERG

With pneumatic cleaning, 4,5 bar Filter hoses from polyester needle felt, 550 gr/m² Exhaust MEB, typ CHB 13 M8 Filter surface 25m² With dust bucket Without control box With control unit for cleaning and manometer

Screw mixer GFA, ± 3 - 4 t/h

Motor mixer ATT; 7,5 kW, 220/380 V, 970 rpm With motor for pumps, with manual gear box With bunker, electrical control unit With brake for pneumatic cylinder on the rotation With sensor for door closer Control SI...

2006 Motorized casting ladle, 14t, IBW

Door dimensions: depth: ø1750 mm, h. 1630 mm Motor: SEW, type: K47DT90L4BMG, 1,5 kW, 1410 rpm, 230/400 V Height of the hook ± 800 mm, with remote control With manual gear motor, frequency controlled With counterw...

1999 Gazing unit LÜBER LW FDA 3250 32 kW

• Manufacturer: Lüber

32kW; 400V; 50Hz Dimensions: Lenght: ±1500mm; Width: ±900mm; Hight: ±1800mm The control for the gazing cycle is controled by the core shooter the unit is equiped by a smal amin vessel (±2l) with connection to a c...

Casting ladle motorized 20t, IBW

• Manufacturer: IBW

With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the overside With mechanical switch to "tilting by hand" With useable lining and 2 pour...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Hydraulic separating wedge DISA TK-3/300

• Manufacturer: DISA

With control panel With spring balancer Max working pressure: 300bar | Stroke of the wedge: 100mm | Jaws lenght: 265mm | Min wedge tip retracted: 26mm | Max wedge tip extended: 48mm | Cutting force: 20500daN | Hy...

Pneumatic Hammer HITACHI, HS5

• Manufacturer: Hitachi

With pneumatic 2 hand control Weight: 400 kg | Dimensions: length 1900mm, width 540mm, height 560mm | Shot axis: Ø 100mm | Air pression: 6 bar | Force of impact: 2805 Joule

Screw mixer AXMANN 5 t/h

• Manufacturer: Axmann

External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...

ITW Mima Cobra IV Wrapping machine with scale

• Manufacturer: ITW Mima
• Model: COBRA IV

The unit features an integrated weighing platform combined with an overhead arm stretch-wrapping system, suitable for stabilizing palletized loads. Equipped with automated wrapping controls, adjustable wrapping c...

Gasing unit LÜBER LW-FDA-425; 4kW

• Manufacturer: Lüber
• Model: LW-FDA 425

With 4 kW heating Max. core weight 15 kg (± 10 l) With contactor control and stainless steel storage tank 30 l Compressed air connection 1" Compressed air control via proportional valve With micro pump, gas dosin...

2008 Dust collector NEUBERG 8200 m3/h.

• Manufacturer: NEUBERG

Pneumatic filter cleaning, 6 bar Intake manifold inside, Ø 454mm Filter surface, 53 m² Exhaust MEB Without control box With control box for cleaning and pression Filter hoses from polyester needle felt, 550 gr/m²...

2003 Rotary table shot blast machine RÖSSLER, Ø 1000 mm

1 turbine, 11 kW With control board Dimensions: length 3925 mm, width 3300 mm, height 3700 mm | Engine: 16 kW, 400 V, 50 Hz, serial number 31757/03 | Table ø: 1000 mm | Useful height: 400 mm

Water press pump for lining spayer

• Manufacturer: GRUNFOS

With surge tank 100 l and control box Weight: ± 200 kg | Motor: 1,5 kW, 2900 rpm, 240/415 V | Pressure: up to 15 bar, 4 m³/h