Used controller in Belgium

1997 Moulding line BELLOI & ROMAGNOLI, 650 mm x 650 mm x 200/200 mm

Type: BRAP/4, construction year: 1997 Moulding line BELLOI & ROMAGNOLI hydraulic squeeze with rotating table With: - roller conveyors for return line (11 meters long) - roll-over (manual drive) - hydraulic statio...

NEW pneumatic sand conveyor FAT, S150 l

Type: S150-100, serial number: 5129 KOM N°: 18659 Weight: 295 kgDimensions: 1000 mm x 800 mm x 145 mmOutlet: Ø 80 mm inlet Ø 150 mmWith cone closure for side filling, 2 openingsControl voltage 230 VWith control...

2022 Cupola filter with cooler GARANT 40.000m³/h

• Manufacturer: Garant

Filter system With discharge screw and motorised double flap With fan With GARANT gas cooler With cooler cleaning, 200Pa, 0.7kW With fresh air flap 1500mm x 350mm With hopper and motorised double flap and big bag...

2024 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

Double wiring injection plant OCC

• Manufacturer: OCC

With injection lid lift Ø Wire: max: 13mm 400V/ 35A/ 50Hz/ 3,3kW Dimensions: length: 3260mm; width: 3050mm; height: 5470mm With control With CE Treatment with 2 wires at the same time Additional: 3 thermal analyz...

Core sand batch mixer, ± 80 l, BOTON-MERLET

Type: BM 80 EL, serial number: 870-567 Motor BONFIGLIOLI, 3 kW, 1410 rpm, 230/400 V Exit 280 mm, height 190 mm, mixer with 3 arms With senor for door closing With pneumatic valve With electric control cabinet, M...

Double floor type grinder DÜRRSCHMIDT/VITEX, 760 mm, 50m/s

Motor CEM, Type: MJPP180MN4, serial number: L617626, 22 kW, 220/380 V, 1450 rpm Driving by beltsstone max 760 mm, stone width 60 mm Speed 50/s Files plates 260x90 mm (2x) With control cabinet

Automated core shooter RÖPER H5

• Manufacturer: Laempe / Röperwerk

Largest core box dimensions: width 460 mm, depth ± 500 mm, height 400 mm with vacuum pump and gas flushing plate With complete housing, core discharge plate, suction pipes, with hydraulic side clamping and hydra...

2008 Trent 200kg DT 83G GAS Dryer with loading conveyor

• Manufacturer: Trent

2008 Trent 200kg DT 83G GAS Dryer with Shuttle With recent Sensotechnics control system. In good condition, it was still running in a laundry until they stopped their activities in May of 2024.

1997 Dryer Passat 258.50 G-WU - 50kg ( 331 )

• Manufacturer: Passat

2x Dryers Passat 258.50 G-WU year 1997 GAS 50kg , with legs 150cm , without tilt function, in very good condition and with control cabinet

2007 Sand feeder 31 liters, KLEIN

External dimensions (as double item): 1400 mm x 1000 mm, h. 1600 mm External dimensions (single item): 550 mm x 550 mm, h 1600 mm Sandinlet Ø 145 mm Sandpipe Ø 100 mm With control valves Sends air from below and ...

1981 Melting furnace for brass FOMET, 1000 kg

Channel, electric, fixed In good condition 1000 kg capacity total Output 700 kg, yield 220 kg/h With ventilator for cooling the transformer 220 V 2.2 KW With control cabinet, fume hood, primary voltage by auto-tr...

Semi-automatic moulding line HWS / HSP 2

50 complete moulds on the plant 4 pouring and cooling lines (partly motorized) 1 mould return line with 3 turnings stations2 transfer carriages 1 mobile push-out station Remolding by hand with chain hoist SIEMENS...

Core sand mixing plant, ± 2 - 3 t/h

Brand: BADIE, serial number: 7,79 mixingcup contenance 60 lit. With batch mixer Mixtensif, type KSU100, Ø 600 mm, for 120 kg sand With sand hopper above the mixer With 2supports for 60 l drums With 2 pumps and PL...