Used engine in Bavaria, Germany

combi burner

• Manufacturer: Riello S.p.A.

Additional title: oil and gas burner | Capacity: 1200 kW | Throughput: 101 kg/h | Gas pressure at maximum power: 20 mbar | Temperature combustion air max.: 60 °C | Power: 3,3 kW | Voltage: 400/230 V | Frequency:...

2023 Aircraft AIRSTAR 853/270/10V without AD 2000

• Manufacturer: Aircraft
• Model: Airstar

CE marking DESCRIPTION The two-stage compression 2-cylinder high-performance unit achieves a very low speed, resulting in particularly quiet and low-vibration operation This ensures a longer service life due to l...

2025 Aircraft Airstar 401/50E

• Manufacturer: Aircraft
• Model: Airstar

CE marking Two-cylinder high-performance units made of gray cast iron for a long service life Large fan impeller and a cooling air baffle on the cylinder for optimal compressor cooling High-quality electric motor...

2025 Fabbri F55 CV with Comfort Kit

• Manufacturer: Fabbri

CE marking, hot air blower, flue gas blower, supply air filter Hot air furnace with a combustion chamber made of stainless, thermal chrome steel, with reinforcing ribs and flue gas exchanger. Centrifugal fans mou...

2025 Aircraft Airprofi 703/270/10 VK

• Manufacturer: Aircraft
• Model: Airprofi

CE marking Stationary compressors with upright 270 l tank Maximum performance in the smallest of spaces. Robust equipment and top quality Fully automatic on/off operation With all safety devices Completely ready ...

1979 Krämer 300

• Manufacturer: Kramer
• Model: 300

Very stable blower with steel impeller. Suction diameter: 300 mm | Blow-out diameter: 300 mm | Volume flow: 5400 m³/h | Engine power: 2,5 kW | Mass: 100 kg

1984 Krämer 160

• Manufacturer: Kramer

Very stable blower with steel impeller. Suction diameter: 160 mm | Blow-out diameter: 160 mm | Volume flow: 2500 m³ / h | Engine power: 2,2 kW | Mass: 50 kg

2012 Separator GEA Westfalia Type: MSE 100-06-177 25-0159EUBA 25-0159EUBA

• Manufacturer: GEA

Item No.: 25-0159EUBA Condition: Used Quantity: 1 MJ UNI-HOCH 043-000 The separator is a cleaning separator used to remove solids from milk, juice, etc. Part 1/3 - Separator Dimensions: Width: 1,600 mm Length: 2...

1990 Nestro 250 x 160

• Manufacturer: Nestro

Engine power: 1 kW | Filter area: 2500mm x 1600mm | Exhaust air connection: 300mm | Current consumption: 2,3 A | Mass: about 120 kg

9.2 m trough auger / screw conveyor with 5.5 KW motor made of V2A 21-0255EUBA 21-0255EUBA

Cat. no.: 21-0255EUBA Condition: Used Piece: 1 9.2 m trough auger / screw conveyor with 5.5 KW motor made of V2A used - in good condition! KK UNI REPP Dimensions: Length: 9,200 mm Width with motor: 1,400 mm Width...

Compressor

• Manufacturer: F.F. luft

Engine speed: 2840 rpm | Max pressure: 6 bar | Power: 1,1 kW | Current: 2,65 A | Voltage: 400 V | Features: 1 cylinder

Fan module

• Manufacturer: Systemair

Capacity: 5500 m³/h | Engine speed: 1420 rpm | Power: 2,2 kW | Current: 5,8 A | Voltage: 3x400 V | Frequency: 50 Hz

1996 Schuko Vacomat 120

• Manufacturer: Schuko
• Model: Vacomat

Residual dust content H2, CE marking The dust extractor is suitable for extracting dry wood dust and dry wood chips at individual dust sources. This also applies for oak and beech wood dust. Furthermore, metallic...

SKF Magnetic

• Manufacturer: SKF

Engine speed: 1180 rpm | Power: 0,3 kW | Current: 3,1/1,8 / 2,8/1,6 A | Voltage: 210-250/360-430 / 240-290/420-500 V | Frequency: 50 / 60 Hz

Centrifugal fan

• Manufacturer: Elektror

Flow rate: 27 m³/h | Total pressure differential: 8500 Pa | Engine speed: 5600 rpm | Power: 3,0 kW | Current: 10,9 / 6,3 A | Voltage: 230 / 400 V | Frequency: 95 Hz