Processing » Bavaria

Search By Category

Search By Manufacturer

Building Filters

3453

Used Processing in Bavaria, Germany

  • Trusted Seller
    Gear motor

    Gear motor

    • Manufacturer: SEW-Eurodrive

    Engine speed: 2750 rpm | Gear unit speed: 72 rpm | Power: 0,88 - 1,3 kW | Current: 2,5 - 3,35 A | Voltage: 400 V | Base construction: Design: M1A | Features: 30 mm solid shaft

    Freising, Germany
  • Trusted Seller
    Gear motor

    Gear motor

    • Manufacturer: vbw-weihenstephan

    Engine speed: 1400 rpm | Gear unit speed: 118 rpm | Power: 1,1 kW | Current: 2,8 A | Voltage: 400 V | Base construction: Design: H1A | Features: 35 mm hollow shaft

    Freising, Germany
  • Trusted Seller
    geared motor

    geared motor

    • Manufacturer: Bauer Geared Motor GmbH

    Additional title: electrical | Rotation number motor: 3000 rpm | Rotation number gearbox: 369 rpm i=8,12 | Torque motor: 8 Nm | Torque gearbox: 76 Nm | Power: S1 | Current: 7,2 A | Frequency: max. 250 Hz | Weigh...

    Freising, Germany
  • Trusted Seller
    gear motor

    gear motor

    • Manufacturer: SEW-Eurodrive

    Additional title: worm gear , three phase motor | Engine speed: 1400 rpm | Gear unit speed: 54 rpm | Torque: 163 Nm | Power factor: 0 Cos ϕ | Power: 1,1 kW | Current: 4,9 A Δ / 2,85 A Y | Voltage: 220 V Δ ...

    Freising, Germany
  • Trusted Seller
    Gear motor

    Gear motor

    • Manufacturer: HSA Schumacher Antriebstechnik e.K.

    Engine speed: 1460 rpm | Gear unit speed: 109 rpm | Current: 13,8 / 7,9 A | Voltage: 230 / 400 V | Frequency: 50 Hz | Base construction: Design: M4 | Features: Motorbremse: 60 Nm, 220 V

    Freising, Germany
  • Trusted Seller
    Gear motor

    Gear motor

    • Manufacturer: SEW-Eurodrive

    Additional title: 3 Phase Asynchron Motor, spur gear, foot mounting | Engine speed: 1400 rpm | Gear unit speed: 70 rpm | Power factor: 0 Cos ϕ | Power: 0,55 kW | Current: 1,85 A | Voltage: 380 V | Frequency: 50...

    Freising, Germany
  • Trusted Seller
    modular electrical valve block

    modular electrical valve block

    • Manufacturer: vbw-weihenstephan

    Mounting dimensions: 18 mm | Pressure range: 8 bar | Flow: 300 l/min | Media temperature: 50 °C | Power: 1 W | Voltage: 24 V DC | Material: mousing: polyamide, internal valve parts: Ultramid, sealing materials. ...

    Freising, Germany
  • Trusted Seller
    Make Offer
    2014 Achberg -

    2014 Achberg -

    • Manufacturer: Achberg

    Achberg Outside silo 62m3; weight 2300kg; bulk density 600kg/m3; max. overpressure +45mbar; max. underpressure -5mbar; opersting temp. max. 50°C; material ALMG3 Condition: Good

    Neumarkt in der Oberpfalz, Germany
    Visit Auction Website
  • 2019 YCM NSV 106 A

    2019 YCM NSV 106 A

    • Manufacturer: YCM

    3-axis machining center YCM NSV 106 A: Technical specifications: −Table size 1,120 x 650 mm −Working feeds from 1 – 20,000 mm/min in all axes −Spindle speeds *12,000 rpm −Feed (X/Y/Z) 20 m/min −Heavy machi...

    $68,480 USD
    Übersee, Germany
  • Trusted Seller
    Homogenizer

    Homogenizer

    • Manufacturer: GEA Group Aktiengesellschaft

    Single-stage homogeniser, used for hop suspensions with a particle size of 1 µm. Integration into a higher-level control system is possible via signal exchange. The motor was controlled via an external FI.

    Freising, Germany
  • Trusted Seller
    Flash pasteuriser

    Flash pasteuriser

    • Manufacturer: API Schmidt-Bretten GmbH Co. KG

    consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank ...

    Freising, Germany
  • Trusted Seller
    2014 Combined Extrusion Thermoforming Line

    2014 Combined Extrusion Thermoforming Line Cannon/Breyer

      Item Description/Artikelbeschreibung: Lot consists of: (1) Combined Extrusion Thermoforming LineDeutsch: Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermofo...

      Bavaria, Germany
    • Trusted Seller
      2017 Combined Extrusion Thermoforming Line

      2017 Combined Extrusion Thermoforming Line Cannon/Breyer

        Item Description/Artikelbeschreibung: Lot consists of: (1) Combined Extrusion Thermoforming LineDeutsch: Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermofo...

        Bavaria, Germany
      • Trusted Seller
        Roller

        Roller

        • Manufacturer: Roller

        Compact room cooler with one fan. Nominal capacity appr.: 0.2 to 2.0 kW (depending on process and environmental conditions) | Air volume: 470 m3/h | Temperature range: 40 °C | Operating pressure: 25 bar | Power: ...

        Freising, Germany
      • Trusted Seller
        Water tanks

        Water tanks

        • Manufacturer: Jacob Carl

        Water tanks for a 100 hl brewhouse. Manufacturer: Jacob Carl Year of construction: 1992 Consisting of: 1 brewing water tank: D= approx. 2500 mm, capacity approx. 16.5 m³ with insulation and cladding 1 service w...

        Freising, Germany
      1112131415

      Overview

      Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

      FAQ

      What should I consider when buying used processing equipment?

      Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

      How do I arrange shipping for processing equipment?

      Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

      What is the typical maintenance for processing equipment?

      Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.