Used in Luxembourg

BrazilMAX low loader

BrazilMAX low loader The BrazilMAX is a low loader with a basic width of 3,200 mm and 6 or 8 pendle-axles, which has been specially conceived for the requirements of the Brazilian market. The unusual axle distan...

Ballast trailer CargoMAX

Ballast trailer CargoMAX The Faymonville CargoMAX is a ballast trailer especially designed for the transport of crane parts and crane weights. Depending on the equipment with 3 to 8 axles, it captivates with it...

MultiMAX Plus semi low loader

MultiMAX Plus semi low loader The MultiMAX Plus is characterised by its weight-optimised design with consistently high point load capacity. The variant with serrated floor grid covering throughout and a loading...

MultiMAX PA-X semi-trailer

MultiMAX PA-X semi-trailer For the higher payload range in the MultiMAX series, transport specialists like to resort to the version with the PA-X pendle-axle. Besides the usual benefits of this axle type – a st...

1986 Kasto PBA 470

• Manufacturer: Kasto
• Model: PBA

Note: Broken box]]> | Size: 40 x 40 x 40 cm | Length: 120 cm | Width: 80 cm | Height: 73 cm | Brand: Kasto | Weight: 8120 kg | Date of 1st registration: 14-07-10 | Mma: 39000 kg | Tare: 8120 kg | Suspension: Pne...

Palfinger F3 201 Meeneemheftruck 2019

• Manufacturer: Palfinger
• Model: F3 201

LED headlamps Uitschuifbare vorken Machine is afgedicht, geen lekkages

CKD Skoda SK 40

• Manufacturer: Skoda

Year of modernization: 1991 | Parameters: table diameter 3750 mm | Ckd: SK 40 | Workpiece dmax: 4200 mm | Workpiece height: 2500 mm | Vertical ram move: 1400 mm | Table diameter: 3750 mm | Table load: 40000 kg |...

SKODA CKD SK 40 A

• Manufacturer: Skoda

Year of modernization: 1991 | Ckd: SK 40 A | Table diameter: 3750 mm | Workpiece dmax: 4200 mm | Workpiece height: 2500 mm | Vertical ram move: 1400 mm | Table load: 40000 kg | Excellent condition weight appr.: ...

1980 Dörries SD 3600/4000 VTL

• Manufacturer: Dörries Scharmann

Control: Conventional | Chuck dia: 3600 mm | Max. turning dia: 4000 mm | Max. height under cross slide: 2950 mm | Max. ram travel vertical: 1750 mm | Ram travel horizontal: 2250 mm | Ram tilting: +30 -45° | Max....

Roll Lathe Heavy Duty Waldrich Siegen

• Manufacturer: Waldrich Siegen

Center height: 400 mm | Max. swing over bed: 800 mm | Max. turning diameter: 650 mm | Min. turning diameter: 200 mm | Max. turning length: 4000 mm | Max. workpiece weight: 10 tons | Faceplate diameter: 600 mm | ...

2011 Fermat WRF 160

• Manufacturer: Fermat
• Model: WRF 160

CNC Facing Head D'Andrea 500 CNC Auto Milling Head microindexing: 0.01° Chip conveyor Floor Plates (2 plates 1900 x 5000 mm, 2 plates 1900 x 4000 mm, 1 plate 1900 x 8000 mm)

2009 FPT Area EV8 M120

• Manufacturer: FPT

1. Automatic programmable head TUPCG 2. Spindle extended horizontal head SELS4 400 mm extension 3. Spindle extended horizontal head SELS6 700 mm extension Options and extras: - Coolant through spindle - Chip conv...

1997 San Rocco GSR 110 FP

• Manufacturer: San Rocco

Control: ECS (Recommended to retrofit) | Spindle dia: 110 mm | Travel x: 2000 mm | Travel y: 1500 mm | Travel z: 1000 mm | Travel w: 550 mm | Spindle power: 18 KW | Spindle speed: 3000 rpm | Table: 1100 x 1300 m...

2002 DMG DMC 340 U

• Manufacturer: DMG Mori
• Model: DMC 340 U

Control: Heidenhain iTNC 530 | X-axis: 2.800 mm (Cross) | Y-axis: 3.400 mm (Longitudinal) | Z-axis: 1.600 mm (Vertical) | B-axis: Simultaneous | C-axis: Simultaneous | Rapid motion: (X/Y/Z) 60 / 30 / 40 m/min | ...

2006 Heavy Duty CNC VTL 6500 mm x 3500 mm Schiess

• Manufacturer: Schiess Froriep

Control: Fagor | Chuck dia: 5420 mm | Max. turning dia: 6540 mm | Max. turning height: 3500 mm | Ram travel vertical: 1680 mm | Ram travel horizontal: 3250 mm | Workpiece weight: 80 Tonnes | Machine weight: apro...

Volvo ECR50 Excavator

• Manufacturer: Volvo
• Model: ECR50

Good condition Volvo ECR50 Excavators available between 2014 and 2022 years. Located in USA and other countries. Click request price for more information.