Building Filters
- Trusted Seller
2020 Neolt Kit Wall Paper
- Manufacturer: Neolt
Cutting Width: 64.96″ Cutting Thickness: 0.047″ (X Axis), 0.019″ (Y Axis) Speed Advancement: 3.28-164’/min Cutting Unit Max: 10 Vertical Blades Horizontal Cutting Speed: 3.28-492’/min Power Supply: 230 V – 50 Hz ...
- Trusted Seller
1998 Bobst SA 130-E
- Manufacturer: Bobst - Rotomec
- Maximum sheet size: Approximately 51.2″ x 36.2″
Maximum Sheet Size: Approximately 51.2″ x 36.2″ Minimum Sheet Size: 22.83″ x 17.72″ Maximum Speed: 7,000 sheets per hour, Maximum Cutting Force: 500 US tons Maximum Cutting Pressure: 300 N/cm². Maximum Gripper Ma...
- Trusted Seller
2018 Duplo 3500 Booklet Maker / 445 Feeder
- Manufacturer: Duplo
Booklet Maker Paper Thickness: Paper Size Range Creaser & Feeder Feed Speed 50 sheets/min (letter size, 1 crease) Max Creases per Sheet 15 Paper Weight Range 110–350 gsm Sheet Size Range 140 × 150 mm to 320 × 650...
- Trusted Seller
Emmeci MC 92 HSB (SX)
- Manufacturer: Emmeci
- Maximum sheet size: 850 x 490 mm (33-15/32 X 19 19/64”)
Fully Automatic Lines to Manufacture Rigid Boxes -Achievement of production speeds up to 3000 pieces per hour (50 pieces per minute) dependent upon materials and finished box sizes -Spotting accuracy of plus or m...
- Trusted Seller
Emmeci MC 92 HSB (DX)
- Manufacturer: Emmeci
Fully Automatic Lines to Manufacture Rigid Boxes -Achievement of production speeds up to 3000 pieces per hour (50 pieces per minute) dependent upon materials and finished box sizes -Spotting accuracy of plus or m...
- Trusted Seller
2021 Markforged X7
- Manufacturer: Markforged
- Model: X7
Machine type: Printing Equipment | Machine location: Upon Request | Stock #: 802969 | -printing process: Continuous Fiber Reinforcement (CFR) | -build volume: 330mm x 270mm x 200mm | -z layer resolution: 50 μm t...
- Trusted Seller
Emmeci MC 92 HSB (DX)
- Manufacturer: Emmeci
- Maximum sheet size: 850 x 490 mm (33-15/32 X 19 19/64”)
Fully Automatic Lines to Manufacture Rigid Boxes -Achievement of production speeds up to 3000 pieces per hour (50 pieces per minute) dependent upon materials and finished box sizes -Spotting accuracy of plus or m...
- Trusted Seller
2017 Markforged MarkTwo
- Manufacturer: Markforged
Printing Process: Continuous Fiber Reinforcement (CFR) Z Layer Resolution: 100 μm – 200 μm Physical Dimensions: Build Volume: Materials: Power: 100-240VAC, 150W (2 A Peak)
- Trusted Seller
Mosstype 18-4 Mounter / Proofer
- Manufacturer: Mosstype
Mosstype 18-4 mounter/proofer. Printer repeat 38″ wide, Proofing width is 71″
- Trusted Seller
2017 Markforged X7
- Manufacturer: Markforged
- Model: X7
Printing Process: Continuous Fiber Reinforcement (CFR) Z Layer Resolution: 50 μm – 250 μm Physical Dimensions: Build Volume: Materials: Power: 100-240VAC, 150W (2 A Peak) Laser: In-process inspection, active p...
- Trusted Seller
2018 Markforged X7
- Manufacturer: Markforged
- Model: X7
Total Hours: 2 166 Total Completed Prints: 301 Build volume: 13" x 10.6" x 7.9" | Print bed: Kinematic coupling - Flat to within 80 microns | Laser: In-process inspection, active print calibration, bed leveling |...
Chicago, IL - Trusted Seller
2018 Markforged X7
- Manufacturer: Markforged
- Model: X7
MACHINE EQUIPPED WITH Total Hours: 2 166 Total Completed Prints: 301
Chicago, IL - Trusted Seller
2021 Desktop Metal P1
- Manufacturer: Desktop Metal
Build Envelope – 200x100x40 mm Build Volume – 0.8L Max Resolution (z) – 0.05mm Process – Binding Jetting Uni-directional Print Direction Binder Jetting Module – 2 Piezo-electric printheads, 4,096 nozzles Chamber ...
- Trusted Seller
2018 Markforge Metal X System
- Manufacturer: Markforged
Printing Process: Metal Fused Filament Fabrication Z Layer Resolution: 85 μm – 170 μm (Post-Sinter) Physical Dimensions: Build Volume: Materials: Release Material: Ceramic (consumed at 1:10 ratio to metal spools,...
- Trusted Seller
Markforged Mark 2
- Manufacturer: Markforged
- Model: Mark
Generate Aluminum-strength Parts Patented CFR™ (Continuous Fiber Reinforcement) Technology Award-winning Professional Desktop 3D Printer Compatible with continuous fiber Carbon Fiber, Fiberglass, Fiberglass HSHT,...
