Building Filters
- Trusted Seller
Taylor Winfield Press Spot ENE-18-100AIr Oper
- Manufacturer: Taylor Winfield
Transformer: 100 KVA | Voltage: 440/460/480 Volts, Single Phase | Throat depth: 24" in | Secondary volts: 3.86- 9.15 | Secondary amps: 28,500 | Air type: Adjustable/Retractable | Cylinder diameter: 5 in | Max fo...
Chattanooga, TN - Trusted Seller
Benelli - 10 steps PAU 2510/11/300/210-2P
- Manufacturer: Benelli
- Capacity: 250,000 kg
- Stroke length: 210 mm
Last used for production of loudspeakers. Nominal power at 20 strokes/min: 2800 kgm 10 Stations + 1 exhaust: CC: 300mm Strokes / minute: 10 55 mm Max movinglenght feeder: 300 mm Max bandwidth: 300 mm AirCu...
Deinze, Belgium - Trusted Seller
1995 Hess Speedy Quick Step 90713
- Manufacturer: Hess
Workpiece length min- max mm: 3500 | Workpiece height min- max mm: 2500 | Working width max mm: 600 | Hydraulic/pneumatic: hydraulic | High pressure/low pressure: high pressure | Cylinder vertical: 3 | Cylinder ...
Petershagen, Germany 
Knuth KNWP 60 HM Hydraulic Workshop Press 131744
- Manufacturer: Knuth Werkzeugmaschinen
- Model: KNWP60HM
Description Motorized Hydraulic Drive Specifications 132,000 lbs force Ideal for repair and assembly work Truing of axles, supports, shafts and much more For removal and press fitting bearings and bushings Automa...
Knuth KNWP 160 HM Hydraulic Workshop Press 131746
- Manufacturer: Knuth Werkzeugmaschinen
- Model: KNWP160HM
Description Motorized Hydraulic Drive Specifications 352,000 lbs force Ideal for repair and assembly work Truing of axles, supports, shafts and much more For removal and press fitting bearings and bushings Automa...
Knuth KNWP 50 M Hydraulic Workshop Press 131743
- Manufacturer: Knuth Werkzeugmaschinen
- Model: KNWP50M
Description Specifications Removal and installation of press-fit bearings, bolts and bushings Straightening beams, shafts, axles and sections Pressing and crimping Load tests and weld sample testing Straightening...
15 Ton, US BAIRD, Model 2-19 - 1.5" Stroke, 8.62" SH, 105-275 SPM, 7 Stations, 2 Pass Feed
- Manufacturer: U.S. Baird
U.S. BAIRD TRANSFER PRESS Model 2-19 15 Ton Capacity 1.5" Stroke 8.62" Shut Height, Step in Ram to Bed 105-275 SPM - untooled 7 stations of punch stripping attached to die set Coolant pump and tank 2 pass Baird f...
Thomaston, CT
2 x Hitachi Zosen 5000-ton Transfer Presses
- Manufacturer: Hitachi
- Stroke length: 2,500 mm
Die Space No.1 (stage 1) Die Space No. 2 (stages 2-4) Capacity 2300 tons 2700 tons Slide stroke 1095 mm 1100 mm Slide adjustment 75 mm 175 mm Shut height (SDAU) 1100 mm 1300 mm Slide area 4300 mm x 1900 mm 4...
United Kingdom
ACME PH-A5 Presses # 4185
- Manufacturer: Acme
- Model: PH-A5
T-slot table High: 2.500 mm | Long: 1.700 mm | Pump: 18 L / mm | Force: 5 TN | Width: 1.000 mm | Voltage: 220/380 V | Neckline: 160 mm | Stem travel: 200 mm | Total power: 4 CV | Piston rod ø of: 70 mm | Surface ...
Badajoz, Spain- Trusted Seller
BENETTI PRESS T150 – 8 Stations – 150 TON
- Manufacturer: Benetti
BENETTI PRESS T150 – 8 STATIONS – 150 TON Mechanical press BENETTI T150 with 8 stations, ideal for stamping, punching, drawing and automatic processing of the metal. This 150-ton industrial press is designed to ...
Milan, Italy - Trusted Seller
DUNKES HS 4-40/20
- Manufacturer: Dunkes
- Stroke length: 100 mm
Pressure: 260 bar | Total stroke: 100 mm | Length: 1750 mm | Width: 1200 mm | Min. stroke: 33 mm/s | Max. stroke: 120 mm/s | Up: 450 mm/s | Oil quantity: 300 l | Voltage 50 hz 3x: 380 Volt | Motor power: 15 kW |...
Brügg, Switzerland - Trusted Seller
BENELLI PRESS 130 TON – 8 STATIONS – WITH TIE/FEEDER
- Manufacturer: Benelli
- Capacity: 1,000 kg
- Stroke length: 180 mm
BENELLI 130 TON PRESS – 8 STATIONS – WITH DECOILER / FEEDER BENELLI 130-ton mechanical press with 8 stations, suitable for progressive stamping, blanking, and automatic metal forming operations. Designed for rel...
Florence, Italy - Trusted Seller
KRUPP PST-A 160
- Manufacturer: Krupp
- Model: PST-A 160
- Stroke length: 210 mm
The was produced in 1980. The machine has a pressing force of 160 tons, while the cutting force is 400 KN. The press can work on 11 stages, including the cutting stage. The ram is capable of 15-75 strokes per min...
- Trusted Seller
MULLER ZE 630
- Manufacturer: Muller
Used double upright hydraulic press Structure: Double upright | Press: Used | Boost:: 630 tons. | Push points: No. 2 Pistons | Sleigh ride: 900 mm. | Maximum slide opening: 1,920 mm. | Sled size: 3.200 x 2.000 mm...
South Italy, Italy 
Komatsu E2W Straight Side Mechanical Press
- Manufacturer: Komatsu
- Model: E2W
E2W Straight Side Mechanical Press Komatsu offers a complete line of straight side presses from 121 tons to 4000 tons, with slide connections from single point to multi-point and multi-side. Frame designs from s...
United States