Building Filters
- Trusted Seller
Ormont DU-44
- Manufacturer: Ormont
- Capacity: 40,000 kg
– Distance Between Side Housings: 63″ – Table Size: 30″ x 60″ – Cutting Head Area: 30″ x 60″ – Stroke: 4″ – Daylight Opening: 12″ – Floor to Top of Bed: 31″ – Horsepower: 5 H.P. – Dimensions (W x D x H): 86″ x 47...
- Trusted Seller
12 Ton Carver Press, Model C, 6" x 6"
- Manufacturer: Carver
12 Ton Carver Press, Model C, 6" x 6" Used Carver Bench Top Press, Model C, 12 ton compression, 6" x 6" platen, electrically heated upper platen, missing lower platen, hand hydraulic pump, Serial No. 25576-960.
Cleveland, OH - Trusted Seller
30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12"
- Manufacturer: Wabash
- Model: G302-CX
30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12" Used 30 ton Wabash Genesis platen press, model G302-CX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 4" daylight, 17" wide tie ...
Cleveland, OH - Trusted Seller
30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12"
- Manufacturer: Wabash
- Model: 30-1212-4STMBX
30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12" Used 30 ton Wabash press, model 30-1212-4STMBX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 3" daylight spacing, 14.5" wide tie...
Cleveland, OH - Trusted Seller
Brown Trim Press, Model T-300
- Manufacturer: Brown
- Model: T-300
Brown Trim Press, Model T-300 Used Brown model T-300 trim press, 11.75" x 37.5" wide cutting window, driven by ac motor, with canopy, control panel, 480 volt, serial# 8791.
Cleveland, OH - Trusted Seller
62.8 Ton FH Maloney 4 Post Molding Press, 16" x 16"
- Manufacturer: FH Maloney
62.8 Ton FH Maloney 4 Post Molding Press, 16" x 16" Used FH Maloney 4 post molding press, 200 ton capacity rerated to 62.8 ton capacity, 16" x 16" electrically heated platens, 10.5" max daylight, 8" diameter main...
Cleveland, OH - Trusted Seller
Brown Dual Fly Wheel Trim Press, 43" x 12.5" Opening
- Manufacturer: Brown
Brown Dual Fly Wheel Trim Press, 43" x 12.5" Opening Used 43" x 12.5" opening Brown dual fly wheel trim press with operator controls, AC motor with multi-speed gearbox belt driven to flywheels
Illinois, USA - Trusted Seller
Used Netzsch Inc. Model 800 MM/I/38 poly propylene plate and frame press
- Manufacturer: Netzsch
- Model: 800 MMI38
Used Netzsch Inc. Model 800 MM/I/38 poly propylene plate and frame press. S/N 400-691. Unit has 37 plates plus the head and end plate. Recessed plates are center fed and equipped with filter cloths. Has 38 chambe...
Wilmington, NC - Trusted Seller
Used JWI/US Filter Model 1000G32-60-DYL 50 cu ft Poly plate and frame press
- Manufacturer: JWI
Used JWI/US Filter Model 1000G32-60-DYL 50 cu ft Poly plate and frame press. 61 Poly plates are 1000 X 1000 mm + the head and end plate. Center feed with 4 corner discharge. Has air over hydraulics closing system...
Wilmington, NC - Trusted SellerAuction
Carver Unheated 2 Post Manual Hydraulic Press, Model 3851-9, Serial# 190254.
- Manufacturer: Carver
Carver Unheated 2 Post Manual Hydraulic Press, Model 3851-9, Serial# 190254.
Sugar Land, TXVisit Auction Website 
Knuth 5.4HP KHP 28 NC Bending and Straightening Press 131547
- Manufacturer: Knuth Werkzeugmaschinen
- Model: KHP28NC
Description The KHP 28 NC bending and straightening press is equipped with a punch and a 4-channel die with a height of 200 mm (7.87 in). This enables a wide range of materials, from thin sheet metal strips to th...
Knuth 2HP KHP 40 NC Horizontal Bending and Straightening Press 130611
- Manufacturer: Knuth Werkzeugmaschinen
- Model: KHP
Description The KHP 40 NC bending and straightening press series is equipped with a punch and a die with a height of 160 mm (6.3 in). Thin sheet metal strips and thicker flat steel can be processed particularly e...
28 Ton Hannifin T-7463 Hydraulic C-Frame Press 48'' Stroke
- Manufacturer: Hannifin
- Capacity: 28,000 kg
- Stroke length: 1,219.2 mm
Hannifin Hydraulic C-Frame Long Stroke Press Used in the Stator Manufacturing Process 28 Ton Model #: T-7643 S/N: T-7463-32 Max Psi Pressure: 1980 55 Gallon Oil Capacity Stroke: Approx 48'' Ram Diameter: 4''
- Trusted Seller
Aida DOUBLE END
- Manufacturer: Aida
- Capacity: 1,814.37 kg
AIDA 4,000 LB. DOUBLE END POWERED REEL Capacity .............. 4,000 lbs (each side) Rated width ........... 12" Machine is equipped with: - 180 degree rotation with locking mechanism - Full set of keepers
- Trusted Seller
MINSTER P2-100-48 Highspeed Press
- Manufacturer: Minster
- Model: P2-100
- Capacity: 100 kg
- Stroke length: 127 mm
Standard Specifications Used Minster High-Speed Mechanical Press Model P2-100-48 "Piece-Maker" 5" Stroke 22" Shut Height 4" Adjustment 48" LR x 31" FB Bed Area 48" LR x 18.5" FB Slide Area 50-100 VSPM Equipment a...
Livonia, MI