Used Presses in South Australia, Australia

Hydraulic Platen Die spotting Press Machine Guarding 7.5kW 54" 1370mm stroke

Hydraulic Platen Die spotting Press Machine Guarding 7.5kW 54" 1370mm stroke HEAVY DUTY We are not sure of the force this ram can apply but it has approx a 3" bore. Jig table 100mm between holes surface ground wi...

Hydraulic Press 100 Tonne Ram 100x80cm

Hydraulic Press, Fabricated 300mm Ram, 100 X 80cm Table Area Approx 50hp 37kw Hydraulic Pack Fitted with hot die punch and curved shear tooling for slasher blades, designed to cut hot spring steel Need to confirm...

Large capacity 100+ Tonne FABRICATED 45kw 415V

SINGLE RAM FABRICATED C-PRESS 700mm STROKE APPROX 45kw 415V HYDRAULIC POWER PACK This machine would be capable of a massive amount of force, its a large bore ram ( exact size TBC) Its at least 250mm and that put...

Hydraulic press Parts Manufacturing Metal Work Power pack approx 3" bore 500 stroke

• Manufacturer: Vickers

Hydraulic press Parts Manufacturing Metal Work Power pack Ram we think is 3" bore 500 stroke approx. Approx 280mm daylight between posts. Vickers valves and pump. Not sure of specs at this stage, but capable of s...

200t Hydraulic Press 25HP 625x625 platen 400 bore

200t Hydraulic Press 25HP 625x625 platen 400 bore 200t Hydraulic Press 3 phase 25HP 625x625 platen 400 bore At one point this was being used to cut blanks to be turned into torespherical pressure vessel ends. LOC...

Large fabricated hydraulic press

Large fabricated hydraulic press $4500 Adjustable reaction force points and seriously strong bed frame construction, this press would suit large scale shaft straightening or similar applications

Hydraulic Press Mobile 3 Phase

Hydraulic Press Mobile 3 Phase LOCATED IN ADELAIDE, AUSTRALIA This item has come from the closure of the Industrial Springs factory in Adelaide, Australia.... we are currently listing many more machines from here.

Hydraulic Press on solid table with Hydraulic Power Pack

• Manufacturer: Sophus Vickers etc

Hydraulic Press on solid table with Hydraulic Power Pack

DUAL station action hydraulic press assembly machine 11kW Light Curtains

• Manufacturer: Mitsubishi/Brook/Parker Vicker

DUAL station hydraulic press assembly including POWER PACK with 11kW motor. Mitsubishi Melsec PLC - PROGRAMABLE CONTROLLER CPU UNIT Parker VICKERS VALVES 2X Microstate series controller MC42D-1-AC light curtain 5...

200 Tonne 4 column 2.2kW Hydraulic Fabricated Press Long Stroke 3 Phase

• Manufacturer: Unbranded

2.2kW Hydraulic Fabricated Press Long Stroke 3 Phase The outside of the ram measures 420mm so its bore will be at least 360mm if the pump is capable of 200 bar that would equate to about 200 tonne of force the co...

Tox Pressotechnik Clinching CLINCH TOOL HYDRAULIC PRESS TZ 05.464781.1

• Manufacturer: TOX Pressotechnik

TOX PRESSOTECHNIK CLINCHING CLINCH TOOL TZ 05.464781 (CAN BE ROBOT MOUNTED). HYDRAULIC PRESS AIR OVER HYDRUALIC INTENSIFIER POWERED BY KRAFT-PAKET EPWX-V3/CEP400 85KN EIN/ON 10% OFFSET LIMIT SENSOR 200231 TZ 05....

Tox Pressotechnik Clinching CLINCH TOOL HYDRAULIC PRESS TZ 05.464781.3 275883

• Manufacturer: TOX Pressotechnik

ROBOT MOUNTED TOX PRESSOTECHNIK CLINCHING CLINCH TOOL ROBOT TZ 05.464781.3 HYDRAULIC PRESS AIR OVER HYDRAULIC INTENSIFIER WITH SMC AIR TANK VBAT20A1-V & VBA40A-04GN POWERED BY KRAFT-PAKET EPWX-V3/CEP400 85KN EIN/...

TOX S8.30.50.6D air powered Pressotechnik Hydraulic press PLC Light Guarded

• Manufacturer: TOX Pressotechnik

TOX S8.30.50.6D air powered Pressotechnik Hydraulic press Manufactured by Brook Engineering SA Micrologix PLC Light Guarded in perspex work station on solid table. 120 x 140 x 200cm

Hydraulic Press 3 Phase with power pack Safety Light Curtain LONG STROKE

• Manufacturer: MELSEC BOSCH etc.

Hydraulic Press 3 Phase with power pack Melsec FX-20MR UNIT PLC Light Curtain Guarding 480MM STROKE

Taylor & challen NO56

• Manufacturer: Taylor

TAYLOR & CHALLEN HYDRAULIC metalworking C PRESS NO56 20 TON This is a stamping press that has been converted to hydraulic operation, its quite a high power pack for a press this size so should be capable of quit...