Machine Tools » Presses » Australia

Building Filters

15

Used frames in Australia

  • ENERPAC 90t Roll Frame Hydraulic

    ENERPAC 90t Roll Frame Hydraulic Press

    • Manufacturer: Enerpac

    Used ENERPAC 90t Roll Frame Hydraulic Press - $20,000 + GST - 415v hydraulic power pack for the main 90t ram - hydraulic raise and lower - remote control for main ram - frame rolls 1075mm forwards and back - main...

    $14,725 USD

    Get financing

    Est. $289/mo

    Mayfield West, Australia
  • Kang Industrial HP-50 Hydraulic Press,

    Kang Industrial HP-50 Hydraulic Press, 50 Tone Pressure, Motorized Industrial H Frame Shop Press

    • Manufacturer: Kaka

    50T pressure, 2 pcs V-Blocks 50-ton Capacity motorized hydraulic press Fixed central cylinder delivers 25 MPA pressure Fully welded steel frame, robust structure workshop press Distance between uprights, 800 mm D...

    $3,754 USD
    Dandenong, Australia
  • no-image_en.png

    Large capacity 100+ Tonne FABRICATED 45kw 415V

      SINGLE RAM FABRICATED C-PRESS 700mm STROKE APPROX 45kw 415V HYDRAULIC POWER PACK This machine would be capable of a massive amount of force, its a large bore ram ( exact size TBC) Its at least 250mm and that put...

      $9,064 USD

      Get financing

      Est. $178/mo

      Ottoway, Australia
    • Kang Industrial HP-25S Manual Hydraulic

      Kang Industrial HP-25S Manual Hydraulic Press, 25 Tonne Workshop Press & Fixed Hydraulic Ram

      • Manufacturer: Kaka

      25 Tonne pressure H-frame workshop press, two Bending V-blocks included Steel welded H-frame workshop press, 25-tonne pressure Fixed central position ensures precise pressing during the operation Double-speed con...

      $1,477 USD
      Dandenong, Australia
    • Kang Industrial HP-25 Industrial Motorised

      Kang Industrial HP-25 Industrial Motorised Hydraulic Press, 25 Tonne Pressure for Workshop & Garage

      • Manufacturer: Kaka

      Welded steel frame, 25 tonne pressure Runs on 240V power, single-phase hydraulic press machine Fully welded frame, robotic structure, H-frame workshop press A fixed central strong hydraulic cylinder ensures preci...

      $2,659 USD
      Dandenong, Australia
    • HYDRAULIC 45 TON FLOOR PRESS

      HYDRAULIC 45 TON FLOOR PRESS AIR-& HYD

        HYDRAULIC FLOOR PRESS 45 TON AIR OPPER- ATED SPRING RETURN JACK WITH AIR PUMP ON SIDE HAS A 120MM FACE PRESSURE GAUGE HP-45P - WORKSHOP HYDRAULIC & PNEUMATIC PRESS - 45 TONNE CNC WELDED STEEL FRAME CONSTRUCTION ...

        $1,338 USD
        Rockhampton City, Australia
      • HYDRAULIC 50 TON FLOOR PRESS

        HYDRAULIC 50 TON FLOOR PRESS HEAVY DUTY

          WORKSHOP PRESS HEAVY DUTY 50 TONNE RAM 2 STAGE HYDRAULICHAND PUMP SPRING RETURN RAM-RISE & FALL WINCH TABLE & RAM GAUGE APPLICATION: FOR THE FAST EFFICIENT REMOVAL AND INSTALLATION OF BEARINGS, GEARS, BUSHINGS, P...

          $1,318 USD
          Rockhampton City, Australia
        • AIR HYDRAULIC 75 TON SHOP

          AIR HYDRAULIC 75 TON SHOP FLOOR PRESS

            AIR HYDRAULIC WORKSHOP PRESS 75000KG CAP TABLE WINCH-150MM GAUGE-PRESS PLATES SET DOES NOT COME WITH A FOOT PEDAL - AS IN PICTURE!! WELBILT BRAND INDUSTRIAL SHOP PRESS 75 TONNE CAPACITY AIR HYDRAULIC PRESS AIR 7...

            $2,207 USD
            Rockhampton City, Australia
          • no-image_en.png

            John Heine 202A

            • Manufacturer: John Heine

            John Heine Mechanical Electric Press Stamping 202A 15t foot pedal 3 phase 130strokes/min ex Brownbuilt and in very good conditon. 1600 x 800 x 1850mm 926kg

            $2,085 USD
            Ottoway, Australia
          • no-image_en.png

            Taylor & challen NO56

            • Manufacturer: Taylor

            TAYLOR & CHALLEN HYDRAULIC metalworking C PRESS NO56 20 TON This is a stamping press that has been converted to hydraulic operation, its quite a high power pack for a press this size so should be capable of quit...

            $2,981 USD
            Ottoway, Australia
          • no-image_en.png

            200 Tonne 4 column 2.2kW Hydraulic Fabricated Press Long Stroke 3 Phase

            • Manufacturer: Unbranded

            2.2kW Hydraulic Fabricated Press Long Stroke 3 Phase The outside of the ram measures 420mm so its bore will be at least 360mm if the pump is capable of 200 bar that would equate to about 200 tonne of force the co...

            $4,410 USD
            Ottoway, Australia
          • no-image_en.png

            Tox Pressotechnik Clinching CLINCH TOOL HYDRAULIC PRESS TZ 05.464781.1

            • Manufacturer: TOX Pressotechnik

            TOX PRESSOTECHNIK CLINCHING CLINCH TOOL TZ 05.464781 (CAN BE ROBOT MOUNTED). HYDRAULIC PRESS AIR OVER HYDRUALIC INTENSIFIER POWERED BY KRAFT-PAKET EPWX-V3/CEP400 85KN EIN/ON 10% OFFSET LIMIT SENSOR 200231 TZ 05....

            $3,893 USD
            Ottoway, Australia
          • no-image_en.png

            Tox Pressotechnik Clinching CLINCH TOOL HYDRAULIC PRESS TZ 05.464781.3 275883

            • Manufacturer: TOX Pressotechnik

            ROBOT MOUNTED TOX PRESSOTECHNIK CLINCHING CLINCH TOOL ROBOT TZ 05.464781.3 HYDRAULIC PRESS AIR OVER HYDRAULIC INTENSIFIER WITH SMC AIR TANK VBAT20A1-V & VBA40A-04GN POWERED BY KRAFT-PAKET EPWX-V3/CEP400 85KN EIN/...

            $4,861 USD
            Ottoway, Australia
          • no-image_en.png

            TOX S8.30.50.6D air powered Pressotechnik Hydraulic press PLC Light Guarded

            • Manufacturer: TOX Pressotechnik

            TOX S8.30.50.6D air powered Pressotechnik Hydraulic press Manufactured by Brook Engineering SA Micrologix PLC Light Guarded in perspex work station on solid table. 120 x 140 x 200cm

            $3,589 USD
            Ottoway, Australia
          • no-image_en.png

            Large fabricated hydraulic press

              Large fabricated hydraulic press $4500 Adjustable reaction force points and seriously strong bed frame construction, this press would suit large scale shaft straightening or similar applications

              $2,737 USD
              Ottoway, Australia

            Overview

            Presses are machines used to apply pressure to materials in order to shape, mold, or compress them. They are commonly used in manufacturing and metalworking industries for tasks such as forging, stamping, and forming. There are various types of presses, including hydraulic, mechanical, and pneumatic, each suited for specific applications and materials.

            FAQ

            What should I consider when buying a used press?

            Consider the type of press, its capacity, age, and overall condition. Check for any signs of wear and tear, and review maintenance records if available.

            How do I ensure the press is shipped safely to my location?

            Use a specialized transport service experienced in handling heavy machinery. Make sure the press is securely fastened and protected during transit.

            What is the maintenance schedule for a press?

            Regular maintenance includes checking hydraulic fluids, inspecting for leaks, and ensuring all moving parts are lubricated. Follow the manufacturer’s guidelines for detailed maintenance intervals.