Used Milling Machines in Netherlands

SORALUCE - FS 8000

• Manufacturer: Soraluce

ATC Chain 40 positons Max. tool size Ø 125 x 400 mm Machine prepared for rotary table Chip conveyor Central lubrication Stroke with vertical head rotated 3300 mm

SSB BE 500 Z/SE 500 E

• Manufacturer: SSB

Milling machine head Bouwjaar: 1986 | Engine: 45 kW | X: 600 mm | Y: 700 mm | Z: 450 mm | Spindle recording: Direct | Machine size (lxwxh): 3.100 x 2.300 x 2.900 mm | Machine weight: 12.500 kg

SORALUCE - SP-6000

ATC Chain Tool Changer 30 Positions Automatic head 2.5 x 2.5 ( Overhauled in 2023) AME Chip conveyor new 2013 HeidenHain HR410 Handwheel Under power

Lagun Goratu - GBM CM5

X-axis: 5000 mm | Y-axis: 1200 mm | Z-axis: 2000 mm | Table length: 6500 mm | Table width: 1100 mm | Table load: 6000 | Power on spindle: 37 kW | Spindle speeds: 4000 Rpm | Spindle taper: 50 ISO/Bt/Mk | ...

MTE - Kompakt Plus

Extended Plus version lower base and travels Box type guide ways AIPTEK Tool changer linear Tooling package SK50 included HeidenHain HR-410 Handwheel

NN (F557)

• Manufacturer: NN

Mountable on any machine (universal milling head) Milling head: 1 | Stroke of the drilling pinole: 80 mm | Spindle recording: via collet | Motor: 0.55 kW / 2800 rpm

ZAYER - 30 KCU 10000

• Model: 30 KCU 10000

New HeidenHain iTNC530 controller in 2015 New bearing in head September 2025 X/Y/Z Linear measuring system IKZ 15 Bar High pressure coolant Central lubrication Optional 2 x floorplates 6000 x 1250 x 245 mm #9240 ...

CME - MH-700

Chip conveyor High preessure coolant 25 Bar ATC chain 60 posiions Optional Magnet table clamping system Auto index head 1 Gr.

Ki-Heung - KNC 1000

X-axis: 3200 mm | Y-axis: 1200 mm | Z-axis: 1600 mm | Table length: 3500 mm | Table width: 1000 mm | Table load: 8000 | Power on spindle: 37 kW | Spindle speeds: 3000 Rpm | Spindle taper: Sk50 ISO/Bt/Mk ...

ANAYAK - HVM 5000

• Manufacturer: Anayak
• Model: HVM 5000

X-axis: 4300 mm | Y-axis: 1200 mm | Z-axis: 1460 mm | Table length: 5000 mm | Table width: 1065 mm | Table load: 20000 | Power on spindle: 22/30 kW | Spindle speeds: 60 - 3000 Rpm | Spindle taper: Bt 50 ...

KUNZMANN - WF7/3

X-axis: 600 mm | Y-axis: 400 mm | Z-axis: 400 mm | Table length: 650 mm | Table width: 400 mm | Table load: 250 | Stroke pinole: 40 mm | Length: 2800 mm | Width: 2400 mm | Height: 2100 mm | Weight: 2000...

NN (F294)

• Manufacturer: NN

Various milling tools With storage racks Do not call, come find yourself

Correa F2VE

• Manufacturer: Correa
• Model: F2VE

Switched adjustable speed Automatic power supply on the drill pinole Head 1 side down degrees

Jafo FWD32JU

• Manufacturer: Jafo
• Model: FWD-32

Motorized upper arm Angled milling head adjustable in two directions Horizontal axis with support bearings

Pullmax X-93

• Manufacturer: Pullmax

Weld edge router Machine weight: 1.000 kg | Plaatdikte max: 50 mm | Chamfer angle: 25º - 50º