TMS EShK Series
new
- Manufacturer: TMS
Extruders manufactured by TECHNOMASHSTROY are represented by two series - EGK and EShK. Despite the similarity of names, these extruders are designed for different areas of use. The extruders of the EGK series ar...
Cherkasy, Ukraine
TMS EGK grain extruder series
new
- Manufacturer: TMS
Extruders manufactured by TECHNOMASHSTROY are represented by two series - EGK and EShK. Despite the similarity of names, these extruders are designed for different areas of use. The extruders of the EGK series ar...
Cherkasy, Ukraine
Meat Mixer
new
Short description: Description: - two shafts with blades - capacity is 450 l - power 7.5 kW - manual opening of a cover - condition is very good, after overhaul
Cherkasy, Ukraine
Meat mixer vacuum L5-FMV-630A
new
Vacuum mixer L5-FMV-630A Designed for preparation of minced meat under vacuum by mixing pre-cut meat with other components according to the recipe, as well as for salting meal and meat in pieces weighing up to 0....
Cherkasy, Ukraine
Meat mixer vacuum L5-FMV-630A
new
Vacuum mixer L5-FMV-630A Designed for preparation of minced meat under vacuum by mixing pre-cut meat with other components according to the recipe, as well as for salting meal and meat in pieces weighing up to 0....
Cherkasy, Ukraine
MIM-300 meat grinder
new
Made of stainless steel. Performance: 300 kg / hour. | Performance when re-grinding the cutlet mass: 100 kg / hour. | Screw rotation speed: 250 rpm | Engine power: 1.9 kW | Power supply: 380 V, 50 Hz. | Mass: 50 ...
Cherkasy, Ukraine
Separator BAADER 696
new
- Manufacturer: Baader
BAADER separators carefully and accurately separate meat from veins, cartilage, bone fragments, etc. Thus, high-grade raw materials are obtained for the further production of high-quality products: for example, c...
Cherkasy, Ukraine
Block cutter IMB 600
new
Specifications: Productivity (not less), kg / h: 1400 | Drive power, kw, v, hz: 4x380x50 | Thickness of slices, mm: 20 | Block feed to the cutting zone: manual | Unloading height, mm: 610 | Maximum block sizes, m...
Cherkasy, Ukraine
Brine preparation station
new
The brine preparation station is designed to mix the ingredients in water in order to obtain the most homogeneous solution, which spreads evenly in the processed meat raw material and does not clog the injector n...
Cherkasy, Ukraine
Press of a mechanical boning PMO 400
new
The increase in pressure is carried out gradually, as the raw materials move inside the working part of the press. Productivity (technical) depending on the feedstock, kg / h up to 400 Occupied area, m2 0.97 Inst...
Cherkasy, Ukraine
Boning device type WK - 2
new
The boning device is designed to separate the meat from the bones of the thighs and legs of broilers. Productivity: ~ 900 pcs / hour - thigh
Cherkasy, Ukraine
Risco RS 21 Machine
new
The Risco RS 21 is a state-of-the-art knitting process for fresh sausages and sausages and is designed for high-speed sausage production. Risco RS 21 guarantees excellent and accurate knitting at speeds up to 180...
Cherkasy, Ukraine
Device for boning ham and drumsticks
new
- Manufacturer: ПП Мясной техник
Ham deboning device is designed to separate the meat from the bones of broiler shanks. Structure and principle of operation of the deboning device: The deboning device is mounted to the table. It is made of stain...
Cherkasy, Ukraine
Separator Baader 601
new
- Manufacturer: Baader
The machine is designed to separate meat from bones, using scraps with the remains of intermuscular bones as raw materials, as well as other fish waste with bones and skin. The meat and bone mass is subjected to ...
Cherkasy, Ukraine
Press of a mechanical boning UNIKON-400
new
- Manufacturer: UNIKON
General principle of operation: The principle used in UNICON type presses is that the meat residues are separated from the bones under pressure and filtered through a filter sleeve. The pressure increase is carri...
Cherkasy, Ukraine
Tip: Enter manufacturer, model or keyword