Used Foundry & Casting in Wallonia, Belgium

1997 Shake-out conveyor FOUNDRY AUTOMATION, 4000mm x 750mm

External dimensions: length 5050mm, width 1100mm, height 2400mm 2 motors On 12 springs (13/essay) On subframe

1962 Double grinder, foundry, Ø 600 mm, continuous

• Manufacturer: BAUTENBERG

Type: SS6/45/25, serial number: 1653 Motor HELIN, type DKH 15- 4; 2 x 5,5 kW; 1430 rpm; 380/660 V Continuous speed with 2 motors and 4-step pulley

Casting ladle, ± 1200 kg

With oilbath gearbox, good ladle cup and good lining

Old gravity casting machine

Length of frame (on 4 feet) 1900 mm

Casting ladle 2,5 t, COLLIN

With oil bath gearbox In good condition Outside: width 1900 mm, h. 2000 mm | Inside: Ø 1000 mm, h. 1000 mm | Weight: ± 800 kg

Casting ladle COLLIN, ± 2 t

On 3 feet (Has been used for desulphurisation) Weight: ± 700kg | Outside dimensions: L. 1770 mm, h. 2080 mm | Useful dimensions: 945 mm, h. 990 mm

Casting ladle ACETARC, 7 t

With oilbath gearbox, worm wheel and shaft number 4 With two spouts, without lining

Casting ladle SENSENBRENNER, ±2,6t

• Manufacturer: Senssenbrenner

External dimesions: Length: 1750mm; Width: 1400mm; Height: 2200mm Useful dimensions: Ø970mm; Height: 950 (without refractory) With planetary gearbox wWth 2 teapots With heat shield With useful lining

horizontal centrifugal casting machine VEB

Motor VEM DDR, type ring CLU 296/4-FW15Z, 3,33 /10 kW, 220/380 V, 650/1950 rpm Each with a different shell diameter Available: 8 x Ø 230-231 mm, length 400 mm 1 x Ø 160-161 mm, length 440 mm With mechanical brake...

Casting ladle COLLIN, 2,7 t

With aerated suspension ring Weight: ± 1200 kg | External dimensions: width ± 1750 mm, h. 1956 mm | Useful dimensions: Ø 1000 mm, h. 1120 mm

Casting ladle ROPER, 4 t

With Oilbathgearbox Building year: 1988 | Weight: 3000 kg

Casting ladle, ± 2,3 t, COLLIN

With with oilbath gearbox With ring of lifting Outside dimensions: 1900mm x 1100mm, h. 2100mm | Useful dimensions: Ø 1000mm, H (without concrete) 1050mm

Casting ladle SOPAME, ± 1 t

With oilbath gearbox With lining Weight: ± 350 kg | External dimensions: 1400 mm x 750 mm, h. 1300 mm | Useful dimensions: Ø 660 mm, h. 770 mm

Casting ladle motorized 20t, IBW

• Manufacturer: IBW

With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the overside With mechanical switch to "tilting by hand" With useable lining and 2 pour...

Motorized casting ladle, 20 t, IBW

Year of construction: 2004 Weight: 12 000 kg with out the lining 6380 kg. With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the oversi...