2018 FRECH Z20/120C
- Manufacturer: Frech
New and unused machine furnace for DAW20A or DAW20S. The Metec type Z20/120C furnace features a durable stainless steel crucible. The crucible capacity is 420 kg, and the melting capacity is 120 kg/h at a connect...
Schorndorf, Germany
1998 FRECH Weightcontrol 2000
- Manufacturer: Frech
Used scale for use on die casting machines with a piece weight of up to 2000g. The device was inspected and repaired by the manufacturer. Load cell and control board replaced.
Schorndorf, Germany
2001 FRECH M200/120
- Manufacturer: Frech
Used machine furnace, Meltec type M 200/120, for use on Oskar Frech hot-chamber die-casting machines with a 200-ton capacity for processing magnesium alloys. Melting capacity per hour: 120 kg/h, 54 kW power ratin...
Schorndorf, Germany
2003 Frech Espana DAW 125 PD SBC3
- Manufacturer: Frech
Used DAW 125 die-casting machine with SBC3 control for zinc alloys. Available as a base for a general overhaul at the manufacturer's factory.
Schorndorf, Germany
1995 FRECH DAW 200S
- Manufacturer: Frech
Used DAW 200 S die-casting machine with Datavario control for zinc alloys. Available upon request. The manufacturer recommends a general overhaul at the overhaul facility. This can be carried out to the extent re...
Schorndorf, Germany
1999 FRECH DAM 315 S
- Manufacturer: Frech
Used DAM 315 S die-casting machine with Datacontrol control for magnesium alloys. Available from our used machine warehouse. The machine is equipped with a Rauch MMO 315E electric furnace. No spraying device. The...
Schorndorf, Germany
2024 FRECH W200Zn-ST
- Manufacturer: Frech
Machine Equipment 1.1.1 Motorized safety door, right in the pouring direction 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment package - Energy efficiency 2.0.1 Ejector assistance packages ...
Schorndorf, Germany
1993 RAUCH MO 50 E
- Manufacturer: Rauch
Used Rauch furnace, type MO50E, including used cast iron pan, base, and control cabinet. Heating output 17.5 kW at 3 x 400 V 50 Hz Suitable for DAW 40 and DAW 50
Schorndorf, Germany
2024 FRECH W50Zn-RC
- Manufacturer: Frech
Machine Equipment 1.0.1 Closing Part Cover on the Base Frame 1.0.2 Closing Part Cover on the Base Frame for Scale/Slide 1.1.0 Motorized Safety Door on the Left in the Pouring Direction 1.4.0 Machine Mountings 1.5...
Schorndorf, Germany
1994 FRECH DAW 50
- Manufacturer: Frech
Used DAW 50 machine as a basis for a general overhaul without control cabinet, furnace, or furnace cabinet. A general overhaul can be carried out at the manufacturer's overhaul facility. The scope of this can be ...
Schorndorf, Germany
2024 FRECH W80Zn-RC
- Manufacturer: Frech
Machine Equipment 1.0.2 Closing Part Cover on the Base Frame for Scale/Slide 1.1.0 Motorized Safety Door on the Left in the Pouring Direction 1.4.0 Machine Mountings 1.5.4 Machine Interior Lighting 1.11.0 Equipme...
Schorndorf, Germany
Mössner Gravity casting
- Manufacturer: Mössner - Rekord
Gravity casting systems for different processes and castings in highest performance as turnkey solution. Whether gravity chill casting or tilting chill casting with rotation of the mould by 90 ° or 180 ° – we sup...
Eschach, Germany
Mössner HPDC high pressure die casting automation
- Manufacturer: Mössner - Rekord
Turnkey systems and individual components for die casting. Our systems technology and automation solutions take over the unloading from the casting machine, testing, cooling, sawing, deburring and mould spraying ...
Eschach, Germany
Processing sand-lime brick
- Manufacturer: LISSMAC Maschinenbau GmbH
Select your country below so we can show you the correct information for your location.
Bad Wurzach, Germany
Tip: Enter manufacturer, model or keyword