Processing » Heat Exchangers » Shell and Tube Heat Exchangers » Texas

Building Filters

784

Used Shell And Tube Heat Exchangers in Texas, USA

  • EXCHANGERS 114733

    EXCHANGERS 114733

      Unused 915 sq. ft. horizontal heat exchanger. 3.542 Design duty (MMBTU/Hr). Mfg. by Wuxi Chemical Equipment (China) in 2023. . Shell Design Rating: 135/FV psig @ 320 deg. F. Tube Design Rating: 175/FV psig @ 300...

      Cleveland, TX
    • EXCHANGERS 114712

      EXCHANGERS 114712

        Unused 22 sq. ft. horizontal heat exchanger. Mfg. by Wuxi Chemical Equipment in 2023. .25 Design duty (MMBTU/Hr). Shell Design Rating: 180/FV psig @ 430/300 deg. F. Tube Design Rating: 232/FV psig @ 430/400 deg....

        Cleveland, TX
      • EXCHANGERS 113042

        EXCHANGERS 113042

          Used 2200 Sq. ft. Zirconium Exchanger. Mfg. by Apex in 2012. Apex Model # Zr-28-288-2200-CS. 28.75" OD. 25'6.75" O.A.L. **Note: Requires one head, the exchanger was directly piped to tubesheet.

          Cleveland, TX
        • EXCHANGERS 113270

          EXCHANGERS 113270

            Used 180 sq. ft. Horizontal 316L Stainless Steel Heat Exchanger. Mfg. by Bos=Hatten in 1982. Shell 100 psi @ 250 deg. F. Tubes 100 psi @ 250 deg. F. (77) 3/4" O.D. x 16 BWG.

            Cleveland, TX
          • EXCHANGERS 114761

            EXCHANGERS 114761

              Unused 650 sq. ft. vertical heat exchanger. Mfg. by Wuxi Zhicherg Biochemical Eng. in 2021. 1.8 Design duty (MMBTU/Hr). Shell Design Rating: 147/FV psig @ 428 deg. F. Tube Design Rating: 174/FV psig @ 428 deg. ...

              Cleveland, TX
            • EXCHANGERS 114765

              EXCHANGERS 114765

                Unused 2,685 sq. ft. vertical heat exchanger. 4.6 Design duty (MMBTU/Hr). Alliance Fab (Graham) in 2022. Shell: 150 psi @ 212 deg. F. Tubes: 150FV psi @ 400 deg. F.; 34" x 156". Primary Surface Condenser. Under...

                Cleveland, TX
              • EXCHANGERS 113514

                EXCHANGERS 113514

                  Used 687 Sq. Ft. Heat Exchanger. Mfg. by Southern Heat Exchanger in 1989. 24" diameter x 16'0" F/F. Shell: Carbon Steel, 75FV psi @ 300 deg. F. Tubes: 316L Stainless Steel, (164) 1" O.D. x 16 BWG, 75FV @ 300 deg....

                  Cleveland, TX
                • EXCHANGERS 114543

                  EXCHANGERS 114543

                    Used 427 sq. ft. vertical exchanger. Mfg. by Louisville Exchanger and Vessel in 2019. 14" diameter x 16'0" F/F. Shell, tubes and heads 304L stainless steel. 50FV @ 360 deg. F. shell. 75FV @ 360 deg. F. tubes. (13...

                    Cleveland, TX
                  • EXCHANGERS 114550

                    EXCHANGERS 114550

                      Used 427 sq. ft. vertical exchanger. Mfg. by Louisville Exchanger and Vessel in 2020. 14" diameter x 16'0" F/F. Shell, tubes and heads all 304L stainless steel. 50FV psi @ 360 deg. F. shell. 75FV psi @ 360 deg. F...

                      Cleveland, TX
                    • EXCHANGERS 113487

                      EXCHANGERS 113487

                        Used estimated 770 sq. ft. Vertical Stainless Steel Heat Exchanger. Mfg. by Heatran.

                        Cleveland, TX
                      • EXCHANGERS 102480

                        EXCHANGERS 102480

                          BUILT IN 1999; 7750MM LENGTH; 950MM WIDTH; 1050MM HEIGHT; 119 SQM 316LSS TUBE VERTICAL HEAT EXCHANGER/EVAPORATOR; PRESSURE TUBE SIDE 40 BAR @ 297 DEG. C.; SHELL 25 BAR @ 297 DEG C.; 490MM DIAMETER X 7692 TOTAL ...

                          Cleveland, TX
                        • EXCHANGERS 112081

                          EXCHANGERS 112081

                            Used 35 square feet heat exchanger. 4TH STAGE JET AFTER CONDENSER; MFG. BY AMETEK IN 1989;

                            Cleveland, TX
                          • EXCHANGERS 114066

                            EXCHANGERS 114066

                              Used Heat Exchanger. EK-12 Vent Condenser. Mfg. by Xchanger in 2002. Model #TV-075. Shell: 316L Stainless Steel, 50FV psi @ 450/-400 deg. F. Heads: 316 Stainless Steel. Small Box/Radiator Fin Type Exchanger.

                              Cleveland, TX
                            • EXCHANGERS 113842

                              EXCHANGERS 113842

                                Unused 1459 sq. ft. 304L stainless steel horizontal heat exchanger. Mfg. by Southern Heat Exchanger in 2020. (186) 1.5" diameter tubes x 18 BWG x 19'11.75" long. Shell rated 103 psi @ 250 deg. F. Tubes rated 127...

                                Cleveland, TX
                              • EXCHANGERS 107821

                                EXCHANGERS 107821

                                  REFLUX EXCHANGER; CONDENSER; MFG BY OHMSTEDE IN 2010; 14 BWG TUBES SEALED WELDED; LUG SUPPORTS;

                                  Cleveland, TX
                                1415161718

                                Overview

                                Heat exchangers are devices designed to transfer heat between two or more fluids without mixing them. They are widely used in various industries such as HVAC, power generation, chemical processing, and automotive to efficiently manage heat transfer processes. Common types include shell and tube, plate, and air-cooled heat exchangers.

                                FAQ

                                What factors should I consider when purchasing a heat exchanger?

                                Consider the type of fluids involved, the required heat transfer rate, operating temperatures and pressures, and the specific application. It's also important to look at the material compatibility and maintenance requirements.

                                How can I ensure my heat exchanger is shipped safely?

                                Use a reputable shipping service experienced in handling industrial equipment. Ensure the heat exchanger is properly packed, secured, and protected against damage during transit.

                                What maintenance is required for a heat exchanger?

                                Regular maintenance includes inspecting for leaks, cleaning to remove fouling, checking for corrosion, and ensuring all connections and seals are intact. Follow the manufacturer’s recommendations for detailed maintenance procedures.