Used logging in Oregon, USA

2021 Grizzly GO531B 21" Vertical Resaw Bandsaw with Brake & Extras

• used

• Manufacturer: Grizzly

Powermatic TS80/SAC Table Shaper

• used

• Manufacturer: Powermatic

Interchangeable Spindles (see photos) Serial No 807908 1050 Pounds 32" Length 45" Width 64" Height

Powermatic 72 Table Saw

• used

• Manufacturer: Powermatic

970 Pounds 57" Length 84" Width 49" Height Hp: 5 | Machine size: 12-14 Inch

Oliver 144 Jointer

• used

Model 144-BD Serial # 74981 w/ Woods 1 HP / 3 phase motor (tag in photos) 536 Lbs 42” Length 66” Width 47” Height

Max Oscillating Spindle Sander

• used

220V 3 Phase 280 lbs. 24" L x 24" W x 48" H

Cannon 2020 HZUS9 Controller for Holzma Panel Saw

• used

• Manufacturer: Holzma

Model # HZUS9 Serial # 1504076 Supply UN1U Freq 60 Removed in good working condition

Gang Edger Sawglide System

• used

Measures 75 1/2" L x 48" W x 74" H Weighs 2160 lbs Was used with 76 Uniguide II 150 lubricant See images for details

COE 10HP Kiln Fans w/72" Blades

• used

Removed in good working condition Blades appear to be "Moore International" Adjustable Pitch Measurements are in photos Priced per each 10 HP 460 Volt Amp 60 Hz 880 RPM Additional info on tag (in photos) 8 Poles

Northfield #4 Table Saw

• used

1390 lbs. 44" L x 36" W x 44" H Size: 4 | Serial: MS92250LV | Hp: 7.5 | Rpm: 3450 | Phase: 3 | Cycles: 60 | Frame: J58 | Enclosure: TEFC | Winding: R & M | Temp rise: 55˚C | Volts: 220 / 440 | Full load amps: 21 ...

Flare Circular Sawguide Resurfacer

• used

• Manufacturer: Flare Machinery Ltd.

From the included manual: "The Flare Machinery Ltd. Sawguide Resurfacer is designed and manufactured for convenience and accuracy when dressing circular sawguides. It is intended to cut mainly Babbitt surfaces, b...

MDI Metal Detector / Scanner (for lumber)

• used

2 @ 46” x 18 ½” x 6” 1 @ 36” x 19 ¾” x 6” 1 @ 38” x 12 ¾” x 2” 1 @ 36” x 11 ½” x 2” 1 @ 30” x 12” x 2” 1 @ 26” x 12” x 2” 1 @ 24” x 12” x 6”

Delta DJ-20 Model #37-350 Jointer

• used

• Manufacturer: Delta
• Model: DJ-20

Catalog number: 37-350 | Made in: Taiwan | Motor hp: 1.5 HP (1 1/2 HP) | Motor rpm: 3450 RPM | Voltage: 115/230V, 60 Hz | Amps: 16.8/8.4 A | Motor type: TEFC (Totally Enclosed Fan Cooled) | Service factor: 1.0 |...

New / Unused Transfer Decks

• new

Never Used See photos for measurements

CEMCO #WBS-197 48" 3-Head Sander

• used

• Manufacturer: Cemco

Very dependable machine 1st Head: Hard rubber: sand lumber surface, particle board, MBF 2nd Head: 65 lb Soft: For veneers, hardwood, 120 grit, #3 hardware, takes 4/5000ths off Spare 2nd Head Included Has one 75 H...

36" Vertical Band Saw

• used

28" x 32" Table No identification tags on unit Size: 36"