Used Processing in Opole, Poland

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

Urbas 3.5 MW furnace

Biomass, bark, wood chips, and sawdust furnaces. Year 2002 Furnace rated at 3500 kW Floor-mounted heat exchanger rated at 5500 kW Delivery scheduled for late April – May 2026

Furnace for drying sawdust and wood chips

Cells

Cells (2 pcs.) Inlet 27 x 14 cm Engine 1.2/0.81 KW

Tank, expansion tank made of acid-resistant sheet metal

Height: 3 m Diameter: 2 m Total height: 4.20 m Tank as shown in the photos

Ash conveyor, waste removal from the Ż 35 furnace

Length 2.90 m, total 3.50 m Screw diameter 190 mm Outer diameter 210 mm Motor with geared motor 0.75 kW

Conveyor belt, driven, in bevel TA 259

Length 8.00 m Width of the tape 50 cm Total width 90 cm Belt conveyor in a slant, rising to about 3.00 m

Furnace, sawdust boiler with a stoker

Furnace with heating power of 600 KW Low-temperature furnace, automatic system for burning biomass Type INNOVEX - BOREX - AT Date of production 2006 Technical and operation documentation Nolting scraper The whole...

Tank for compressor 750 l

Tank with a capacity of 750 l Pressure 10 bar - height 170 cm - diameter 80 cm

Tank for compressor 500 l

Tank with a capacity of 500 l Pressure 16 bar Year 2002 - height 200 cm - diameter 60 cm

Mahle screw compressor, 22 KW motor 15

• Manufacturer: Mahle

TYPE MSK D 22 Pressure 10 bar Motor 22 KW Number of hours 06772 Year 1995 - length 1,70 m - width 100 cm - height 1,00 m

Bevel belt conveyors for sawdust, woodchips, grain, silage, etc.

1. conveyor belt with bevel mobile on wheels Horizontal length 6.00 m Bevel length 2.00 m Internal width 1.00 m Total width 1.50 m + 40 cm wheels Discharge of the horizontal part at a height of 1.10 m Year 2009 W...

Froling 500 KW 25 furnace

500 kW stove TURBO MAT 500 TYPE Storage for biomass, bark, sawdust, and wood chips (G 30 – G 50) Year 2007 Moving grates 8.5 m long, 200 mm diameter fuel screw feeder Fully automatic ash removal and heat exchange...

Atlas Copco compressor air dryer

• Manufacturer: Atlas-Copco

TYPE FD 450 Pressure up to 14.5 bar Year of production 1999 Width 130 cm Depth 94 cm Weight 315 kg Height 113 cm Motor 5,1 KW