Used logging in Oregon, USA

Northfield #4 Table Saw

1390 lbs. 44" L x 36" W x 44" H Size: 4 | Serial: MS92250LV | Hp: 7.5 | Rpm: 3450 | Phase: 3 | Cycles: 60 | Frame: J58 | Enclosure: TEFC | Winding: R & M | Temp rise: 55˚C | Volts: 220 / 440 | Full load amps: 21 ...

Flare Circular Sawguide Resurfacer

• Manufacturer: Flare Machinery Ltd.

From the included manual: "The Flare Machinery Ltd. Sawguide Resurfacer is designed and manufactured for convenience and accuracy when dressing circular sawguides. It is intended to cut mainly Babbitt surfaces, b...

MDI Metal Detector / Scanner (for lumber)

2 @ 46” x 18 ½” x 6” 1 @ 36” x 19 ¾” x 6” 1 @ 38” x 12 ¾” x 2” 1 @ 36” x 11 ½” x 2” 1 @ 30” x 12” x 2” 1 @ 26” x 12” x 2” 1 @ 24” x 12” x 6”

Delta DJ-20 Model #37-350 Jointer

• Manufacturer: Delta
• Model: DJ-20

Catalog number: 37-350 | Made in: Taiwan | Motor hp: 1.5 HP (1 1/2 HP) | Motor rpm: 3450 RPM | Voltage: 115/230V, 60 Hz | Amps: 16.8/8.4 A | Motor type: TEFC (Totally Enclosed Fan Cooled) | Service factor: 1.0 |...

New / Unused Transfer Decks

Never Used See photos for measurements

CEMCO #WBS-197 48" 3-Head Sander

• Manufacturer: Cemco

Very dependable machine 1st Head: Hard rubber: sand lumber surface, particle board, MBF 2nd Head: 65 lb Soft: For veneers, hardwood, 120 grit, #3 hardware, takes 4/5000ths off Spare 2nd Head Included Has one 75 H...

36" Vertical Band Saw

28" x 32" Table No identification tags on unit Size: 36"

Knurled Feed Rollers

• Manufacturer: Rex / Rexnord

Type E High Speed Model # ZEP2207 Shaft: 2 ⅜” | Diameter: 10” | Face: 18 ¼”

Stenner 36 Band Saw

• Manufacturer: Stenner

• Outfitted with a 3" blade • 36" wheel • See photos for more details *~ Local Pick-Up or Freight Shipping Only ~*

2023 Lowe Boats Ultra 182 Fish & Cruise

• Manufacturer: Lowe
• Model: Ultra 182

2023 Lowe Boats Ultra 182 Fish & Cruise A mid-sized pontoon value for anglers and fun-loving families, the Ultra 182 FC is ready for you. The Lowe® Ultra 182 FC (Fish & Cruise) is prepped to please fishermen, fam...

Corley Log Turner Mechanism, Model 30A Hydraulic Log Turner Mechanism

• Manufacturer: Corley

Used Corley Model 30A Hydraulic Log Turner Mechanism. Needs refurbishing but is in good shape overall. No controls or hydraulic power unit. Those are available as options. Vertical stroke is 30" with 10" hori...

Log Kicker Assembly

Used Log Kicker Assembly. Two heavy duty hydraulic cylinders. No HPU or controls. Inventory No. 100LK . See photos of Log Kicker Assembly on our web site. Inventory No. 100LK. Located at our Portland, Oregon ...

Sharp Chain Log Feeding System

• Manufacturer: Sharp

Used Sharp Chain Log Feeding System. 4-Arm Log Stop-and-Loader with 12' overall spacing. Four (4) jump-up log turning mechanisms, hydraulic motor drive. System will handle logs from 6" diameter and up to 20' ...