Used Processing in Flanders, Belgium

1967 Printex 380 AN
- Manufacturer: Printex
Bottom seal machine to make loose bags and bags on the roll with core Machine can run loose bottom seal bags Machine can run bottom seal with tear-off perforation and rewinded on a carton core Photocell for print...
Aalst, Belgium
Volumetric mixer
Volumetric mixer for 3 components
Aalst, Belgium
1967 Stiegler TS800
- Manufacturer: Stiegler
- Model: TS800
Servo driven side seal machine Refurbished with touchscreen 220 – 380 Volt – 50Hz Unwind in line with 2 positions Servo driven film feeding rolls Photocell for printed film Pick off section Stacking table Machine...
Aalst, Belgium
FMC 75W
- Manufacturer: FMC
Wicket machine with medium long arms Servo driven machine (overhauled) Wicket arms 500mm, good for bread bags and also for bigger wicket bags 3 sets of 6 wicket arms Rubber draw rolls with blowing fingers Driven ...
Aalst, Belgium
Stiegler U900 W-TSL
- Manufacturer: Stiegler
- Model: U900
Carrier bag making machine Machine with clutch & brake Wicket machine with 6 pair of arms to stack the carrier bags on the conveyor belt Long conveyor belt Electrical operator panel for all machine settings, incl...
Aalst, Belgium
Trusted Seller
Modesta Blower installation
Modesta blower, type: MX15/351, serial number: B5211242, year of construction: okt-05, 11 kW, capacity: 10390 m³/h, weight: 500 kg, outfeed diameter: 350 mm, total dimensions: 1380 mm x 1000 mm x 1670 mm.
Anzegem, Belgium
Trusted Seller
Aariac Air compressors
Aariac air compressor, model: CPRD 4200 N 8298 MT V230, year of construction: 2014, 230 V, 3 Ph, 50 Hz, 3 kW, maximum pressure: 11 bar, weight: 121 kg, dimensions: 1550 mm x 500 mm x 950 mm.
Anzegem, Belgium
Trusted Seller
Tecumsek Condensors
Tecumsek condensing unit, model: SILAJ2446ZFZ, 220/240 V, 50 Hz, 4.1 A, refrigerant: R404A, dimensions condensing unit: 900 mm x 550 mm x 820 mm.
Anzegem, Belgium
Trusted Seller
NN roller conveyor Roller conveyor
Plastic roller conveyors, roller width: 450 mm, total dimensions: (2x) 980 mm x 480 mm x 60 mm. Missing rollers.
Anzegem, Belgium
Trusted Seller
Dumon Roller conveyor
Dumon 45° roller conveyor, fabrication number: 1910052, s/s frame, plastic rollers, roll width: 160 mm, total dimensions: 2200 mm x 920 mm x 940 mm.
Anzegem, Belgium
Trusted Seller
NN roller conveyor Roller conveyor
Mobile roller conveyor, s/s frame, plastic rollers, roller width: 540 mm, total dimensions: 1600 mm x 620 mm x 860 mm.
Anzegem, Belgium
Pallet stretch winder
Pallet stretch winder Photocell to check the height of pallet Electrical cabinet renewed In good working condition.
Aalst, Belgium
1987 Arvor 1182 GGL
- Manufacturer: Arvor
- Model: 1182 GGL
Bottom weld bag making machine Bottom seal with flying knife Sealing wires on top and bottom seal bar Blocked bags system Unwind with 2 positions 4 roll dancer with infeed motor and rubber infeed roll with nip ro...
Aalst, Belgium
2003 ITALWORK Galaxy 1000
220 – 380 Volt – 50Hz The machine can produce standard sideweld bags, can also make side weld bags with inside sealed patch handle, or side weld bags with a loop handle sealed on the bag The side weld sealing bar...
Aalst, Belgium
1978 Arvor 872 BB
- Manufacturer: Arvor
Bottom seal machine with flying knife Unwind stand with mechanical shaft + cones + mechanical brake system Adjustable roller system to position the print (offset system) Photocell for printed film Clutch and brak...
Aalst, Belgium