Used Machine Tools in Saxony, Germany

WMW clamping drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I160 Torque adjustable in 8 steps max. 110 Nm 160 rpm 220 / 380 V 3AC 0.75 kW Splined shaft profile according to TGL 0-5471 for further clamping drives s...

POREBA Luenette

• Manufacturer: Poreba

Luenette, bezel, setting stick POREBA suitable for Poreba TPK-80 ! used, tested !

PAGUS Luenette

• Manufacturer: Pagus

Luenette, bezel, steady rest, fixed PAGUS used, tested !

SILISTRA chip conveyor

• Manufacturer: Silistra

Chip conveyors, hinged apron conveyors Chip conveyors, hinged belt conveyors SILISTRA TC 280 x 900 ( TC280x900 ) 220 / 380 V used, tested !

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 ( DH200x3 ) TGL 30-2333 centering Ø: 107 / 103 mm, depth: 17 mm ( conical ) used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW, ROTO RECORD DH 250 x 3 ( DH250x3 ) TGL 30-2332 used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRDA250x3 ) Jaws individually adjustable by toothing ! with accessories ! used, tested !

WMW Drill

• Manufacturer: WMW

Twist drill WMW Ø 69 mm x 425 mm HSS used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Jaws individually adjustable by toothing ! without jaws ! used, tested !

RÖHM 2-jaw chuck

• Manufacturer: Röhm

2-jaw chuck, two-jaw chuck, power chuck, wedge hook chuck RÖHM KFD-160/2 Jaws individually adjustable by toothing ! used, tested !

ALLMATIC basic B 160

• Manufacturer: ALLMATIC

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Jaw width: 160 mm | Weight of the machine approx.: 13,5 kg | Space requirements of the machine approx.: m | Spa...

HOFFMAN LK 630 - G 17

• Manufacturer: Hoffmann

Face Chuck - 3-Jaw chuck Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Diameter: 630 mm | Weight of the machine approx.: ca. 275 kg | Transport dimensi...