Used Machine Tools in Saxony, Germany

2006 Röhm KSF 430/3 (Nr. 34)

• Manufacturer: Röhm

Power chuck for EMAG No. 5875620 features: automatic clamping Flanged bore inside Ø 186mm through hole Ø 197 x 64mm 3x clamping bolt M20x250mm Fmax: 5000 daN 2Set of forming jaws

WMW 375x3

• Manufacturer: WMW

3-jaw chuck with external jaws with flange mounting size Ø 375 x 20mm; 2x adjustment bore Ø 24 x 15mm, pitch circle Ø 173mm; 3x clamping bolts Ø 26.5 x 60mm, pitch circle Ø 174mm Rotation range min./max.: Ø 100 /...

WMW PS 900

• Manufacturer: WMW

Equipment: -4x clamping claws Flange mounting: -Ø inside: 410mm continuous x depth: 50mm -12x clamping holes Ø 26mm, pitch circle Ø 460mm

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 used, tested !

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 including one set of stepped jaws ! used, tested !

WMW Niles 250x3-II

• Manufacturer: Niles

three jaw chuck made of steel incl. chuck key inkl. 2x 3-Backen flange size : Ø 250 x 26mm, fastening with 4 pieces clamping bolts inside divided circle Ø 170mm on Sale with or without flange! i.D.

WMW PS 1000

• Manufacturer: WMW

Equipment: -4x external/internal jaws; clamping travel approx. 200mm; clamping range max; approx. Ø 900mm / min. approx. Ø 100mm. -clamping flutes size according to DIN 650: a=22mm; h=43mm; b=40mm; c=16mm x lengt...

WMW AW1000x800x640

• Manufacturer: WMW

clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm

GARANT shrink lining set

• Manufacturer: Garant

Shrink fit chuck set, shrink fit chuck GARANT 302325 SK 40 used !

1994 WMW 620x160

• Manufacturer: WMW

4 jaws faceplate flange intake/diameter : passage drill hole 160 mm flange diameter 197mm hole circle 235mm jaws are single guided with chuck key The given info are approx. values!

WMW PS 400x4

• Manufacturer: WMW

Face Slidewith 2x 4 pcs clamping chucks (internal/outer) clamping travel 45mm clamping area: internal dia. 120-400mm and outer diameter 120-330mm flangeintake dia. size 160mm equipment: chuck key

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

GÜHRING sealing plug

• Manufacturer: Guhring

Sealing plugs, 6 pieces GÜHRING GM300 4985 63.000 16136705 used, tested !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...

WMW Bezel

• Manufacturer: WMW

Bezel, lunette, setting stem, fixed WMW used, tested !