Used Machine Tools in Saxony, Germany

WMW milling head

• Manufacturer: WMW

Milling head , drill head , angle head WMW, WEMA Engelsdorf UA1 360° rotatable in two planes Hollow shaft ( drive ): Ø 28 mm, wedge width: 6 mm used, tested !

BILZ leveling shoe

Leveling shoe, machine foot, wedge foot, free-standing, 4 pieces BILZ PK 4/1 used, tested !

BILZ leveling shoe

Leveling shoe, machine foot, wedge foot, free-standing, 2 pieces BILZ 4-VRC New !

DECKEL clamping drive

• Manufacturer: Deckel / Maho

Clamping drive, manual with fine adjustment DECKEL spare part for milling machine DECKEL KF12 ! used, tested !

DECKEL trapezoidal threaded spindle

• Manufacturer: Deckel / Maho

Trapezoidal threaded spindle COVER Thread: Ø 24 mm spare part for milling machine DECKEL KF12 ! used, tested !

RSF-ELEKTRONIK length measuring system

Length measuring system RSF-ELEKTRONIK MSA6706 83577408 approx. 0.6 m connection cable Spare part e.g. for machining center MAZAK AJV25/405 ! used, tested !

HEIDENHAIN length measuring system

Length measuring system HEIDENHAIN LS486C ID 329 991-22 approx. 1,5 m connection cable Spare part e.g. for machining center HECKERT CWK400 D ! used, tested !

PAULSTRA all-metal damper

• Manufacturer: PAULSTRA

All-metal damper, machine foot set, leveling foot set, vibration isolator PAULSTRA V1H752-11 Material (all-metal damping pad) CrNi steel wire All-metal damper set consists of 4 feet ! used, tested !

WMW AW 1100x1000x610

• Manufacturer: WMW

Drill cube material made of cast steel. Bohrwürfel Material aus Stahlguss. T-Nuten nach DIN 650m - Spannfläche vertikal: LxT: 1000 x 610mm - Spannfläche horizontal: LxB: 1000 x 1100mm

BOSCH tin snips

• Manufacturer: Bosch

Sheet metal shears, high-frequency sheet metal shears, high-frequency tools, high-frequency machines BOSCH EW/HEP 64A4Z1 0.1 / 0.12 KW 2075 / 2775 strokes/min 200 / 265 V 3AC 150 / 200 Hz approx. 3.5 m connection...

HELLER chip conveyor

• Manufacturer: Heller

Chip conveyor HELLER type BEA 05 Drive motor: 0,3 kW 9.0 rpm 220 / 380 V 3AC, 50 Hz Coolant pump1: Q: 250 l/min, H: 13 m 1.7 kW 2850 rpm 230 / 400 V 3AC 50 Hz Coolant pump2: Q: 100 l/min, H: 2 m 0.24 kW 2750 rpm ...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 130 x 3 ( DH315x3 ) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm ( left-hand thread ) bore: Ø 30 mm, depth: 55 mm used, tested !

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 315 x 3 ( DH315x3 ) TGL 30-2333 3x threaded hole: M12 x 1.75, depth: 30 mm used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 centering Ø: 139 / 135 mm, depth: 19 mm ( conical ) used, tested !

TOS 3-jaw chuck

• Manufacturer: TOS

3-jaw chuck, three-jaw chuck TOS 100/3-1-M1 New ! N: max. 5300 rpm | Outside ø: 100 mm | Centering ø: 80 mm | Hole circle ø (chuck): 90 mm | Bore ø: 23 mm | Height with jaws: 69 mm | Dimensions ( lathe chuck ): 1...