Used Machine Tools in Saxony, Germany

BILZ leveling shoe

Leveling shoe, machine foot, wedge foot, free-standing, 2 pieces BILZ 4-VRC New !

DECKEL clamping drive

• Manufacturer: Deckel / Maho

Clamping drive, manual with fine adjustment DECKEL spare part for milling machine DECKEL KF12 ! used, tested !

DECKEL trapezoidal threaded spindle

• Manufacturer: Deckel / Maho

Trapezoidal threaded spindle COVER Thread: Ø 24 mm spare part for milling machine DECKEL KF12 ! used, tested !

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 85,0 HSS used, tested ! Diameter: Ø 85.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK6 | Overall length: 480 mm | A-measure: 230 mm | Span length: 255 mm | Dimensions...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 57.0 HSS New ! Diameter: Ø 57.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 423 mm | A-measure: 266 mm | Span length: 230 mm | Dimensions ( packag...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 36,0 HSS New ! preserved !

RSF-ELEKTRONIK length measuring system

Length measuring system RSF-ELEKTRONIK MSA6706 83577408 approx. 0.6 m connection cable Spare part e.g. for machining center MAZAK AJV25/405 ! used, tested !

HEIDENHAIN length measuring system

Length measuring system HEIDENHAIN LS486C ID 329 991-22 approx. 1,5 m connection cable Spare part e.g. for machining center HECKERT CWK400 D ! used, tested !

PAULSTRA all-metal damper

• Manufacturer: PAULSTRA

All-metal damper, machine foot set, leveling foot set, vibration isolator PAULSTRA V1H752-11 Material (all-metal damping pad) CrNi steel wire All-metal damper set consists of 4 feet ! used, tested !

WMW milling head

• Manufacturer: WMW

Milling head, drilling head, angle head WMW Tool holder: SK40 with size 25 collet chuck 360 ° rotatable in two planes used, tested !

HELLER chip conveyor

• Manufacturer: Heller

Chip conveyor HELLER type BEA 05 Drive motor: 0,3 kW 9.0 rpm 220 / 380 V 3AC, 50 Hz Coolant pump1: Q: 250 l/min, H: 13 m 1.7 kW 2850 rpm 230 / 400 V 3AC 50 Hz Coolant pump2: Q: 100 l/min, H: 2 m 0.24 kW 2750 rpm ...

PAGUS drive unit

• Manufacturer: Pagus

Drive unit ( without motor ) for tool chucks PAGUS Ø 80 mm Flange diameter: Ø 104 / 80 mm, depth: 12 mm 4x threaded hole: M6 x 1.0, depth: 10 mm 4x threaded hole: M5 x 0.8, depth: 10 mm Drive unit with pneumatic ...

WMW milling head

• Manufacturer: WMW

Milling head WMW Tool holder: SK30 360 ° rotatable drive flange: Ø 22 mm, 2x driver, width: 20 mm used, tested !

WMW clamping technology set

• Manufacturer: WMW

Clamping technology set, tool holder, reducing sleeve , center point WMW 2 x fixed center point SK 45 1 x mandrel SK 50, Ø 40 mm, 80 mm long 1 x mandrel SK 50, Ø 50 mm, 235 mm long used, tested !

POKOLM shrink feed kit

• Manufacturer: POKOLM

Wet Wipes Packing Machine VPD450 Tool: Ø 6 / 8 / 10 / 12 /16 mm | Usable length: 75 mm | Dimensions ( single shrink fit chuck ): 163 x Ø 64 mm | Dimensions ( packed ): 330 x 210 x 70 mm