Used Machine Tools in Saxony, Germany

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 130 x 3 ( DH315x3 ) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm ( left-hand thread ) bore: Ø 30 mm, depth: 55 mm used, tested !

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 315 x 3 ( DH315x3 ) TGL 30-2333 3x threaded hole: M12 x 1.75, depth: 30 mm used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 centering Ø: 139 / 135 mm, depth: 19 mm ( conical ) used, tested !

TOS 3-jaw chuck

• Manufacturer: TOS

3-jaw chuck, three-jaw chuck TOS 100/3-1-M1 New ! N: max. 5300 rpm | Outside ø: 100 mm | Centering ø: 80 mm | Hole circle ø (chuck): 90 mm | Bore ø: 23 mm | Height with jaws: 69 mm | Dimensions ( lathe chuck ): 1...

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 200 x 3-III ( DH200x3-III ) TGL 30-2333 New !

ROTO RECORD 4-jaw chuck

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 315 x 4 ( DH315x4 ) TGL 30-2333 with chuck key used, tested !

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

WMW ERFURT PYE 160 neuwertig

• Manufacturer: Erfurt

draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diamete...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 ( DH200x3 ) TGL 30-2333 centering Ø: 107 / 103 mm, depth: 17 mm ( conical ) used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW, ROTO RECORD DH 250 x 3 ( DH250x3 ) TGL 30-2332 used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRDA250x3 ) Jaws individually adjustable by toothing ! with accessories ! used, tested !

ROTO RECORD 4-jaw chuck

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 200 x 4 ( DH200x4 ) centering Ø: 106 / 102 mm, depth: 20 mm ( conical ) used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 - III ( DH200x3-III ) TGL 30-2333 3x threaded hole: M10 x 1.5, depth: 30 mm used, tested !