Used Cnc Lathes in Baden-Württemberg, Germany

2007 EMCO MAXXTURN 45 #1052-04007
- Manufacturer: Emco
- Model: MAXXTURN 45
- Spindle bore: 53 millimeter
- Power requirement: 30.4 kilowatt
Accessories collet fixture 173 E on main spindle, collet fixture 163 E on sub spindle, bar loading magazine make FMB, model turbo 3-36/3200 A, YOM 2018, for bar dia. up to 36 mm and bar length up to 3200 mm, vari...
Bühl, Germany
2001 MONFORTS KNC 5 1000 #1052-04072
- Manufacturer: Monforts
- Model: KNC 5
- Spindle bore: 70 millimeter
Accessories 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant
Bühl, Germany
2000 MONFORTS KNC 5 1500 #1052-04076
- Manufacturer: Monforts
- Model: KNC 5
- Spindle bore: 70 millimeter
Accessories 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant
Bühl, Germany
2001 WEILER E 30 /D 1 #1052-04065
- Manufacturer: Weiler
- Model: E30
- Spindle bore: 42 millimeter
- Power requirement: 10 kilowatt
Accessories 3-jaw chuck SCHUNK 200 mmø, changing tool post, coolant
Bühl, Germany
1998 INDEX MS 25 E #1052-03000
- Manufacturer: Index
- Model: MS25
- Power requirement: 20 kilowatt
- 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories various tool holders...
Bühl, Germany
WEILER E35
- Manufacturer: Weiler
- Model: E35
WEILER E 35 cycle-controlled lathe - circulation over bed 410 via facing slide 200mm - 950 mm center distance - speeds up to 3000 rpm V-constant - machine with chip removal, grooving, thread drilling, thread free...
Rottweil, Germany
KEMT GHL30/GH/GS
- Manufacturer: KEMT
Control: FANUC oi-TF, SIEMENS | Storage location: 74196 Neunstadt am Kocher | Turning diameter: 100 mm | Turning length: 100 mm | Machine weight approx.: 1,1-1,2 t
Neuenstadt am Kocher, Germany
2001 Traub CNC lathe
- Manufacturer: Traub
TNC65DGY, TX8H, year 2001 Show more Traub CNC Lathe TNC65DGY, TX8H, year 2001 2x 10-station turret with rotating tool drive VDI30 C-axisAxis on main/counter spindle Y-axis on turret 1 Hainbuch BZI65 on main/count...
Winterbach, Germany
2007 Traub TNX 65/42 CNC bar turning machine
- Manufacturer: Traub
- Model: TNX65/42
Show more Fully functional Traub TNX 65/42 CNC bar turning machine Year of manufacture 2007 Operating hours 36,500 New main spindle bearing 2022 (running time represents the total running time - counter has not b...
Winterbach, Germany
2011 Traub CNC lathe TNX65, TX8i-s
- Manufacturer: Traub
- Model: TNX65
Show more Traub CNC lathe TNX65, TX8i-s, year 2011 Description: Main / counter spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, attached tools, 2 x C axis, counter spindle, chip conveyor, belt filter, coo...
Winterbach, Germany
2008 Traub CNC lathe TNA300Y, TX8i
- Manufacturer: Traub
- Model: TNA300Y
Show more Traub CNC lathe TNA300Y, TX8i, year 2008 Y-axis, C-axis, red. Tool drive, VDI30, hollow clamping cylinder 65mm, 185E clamping top 3 jaw chucks Röhm DURO-NCES 215-65/3, LNS Hydrobar, 1 VDI30 turret, tail...
Winterbach, Germany
2005 Traub CNC lathe TNC65DGY, TX8I
- Manufacturer: Traub
- Model: TNC65DGY
Show more Traub CNC lathe TNC65DGY, TX8I, year of manufacture 2005, serial no. 1130 Machine description Y-axis on S1, V-axis, 2xC-axis, 2xred. Tool drive, 2 turrets VDI30, Hainbuch BZI65 on main and counter spind...
Winterbach, Germany
1997 Traub CNC lathe TNA300Y, TX8H
- Manufacturer: Traub
- Model: TNA300Y
Show more Traub CNC lathe TNA300Y, TX8H, year 1997 Y-axis, C-axis, rotating tool drive, VDI30, hollow clamping cylinder 65mm, 3 jaw chucks Röhm DURO-NC 225/3 Id.423752, 1 turret VDI30, tailstock, chip conveyor, f...
Winterbach, Germany
2000 Traub CNC lathe TNA300Y, TX8H
- Manufacturer: Traub
- Model: TNA300Y
Show more Traub CNC lathe TNA300Y, TX8H, year 2000 Y-axis, C-axis, rotating tool drive, VDI30, 65mm hollow cylinder, 185 E collet chuck 1 VDI30 turret, tailstock, chip conveyor, LNS Hydrobar Approx. 38,000 produc...
Winterbach, Germany
2001 Traub CNC Lathe TNA300Y, TX8H
- Manufacturer: Traub
- Model: TNA300Y
Show more Y-axis, C-axis, red. Tool drive, VDI30 12 stations, hollow clamping cylinder 65mm, 185E clamping top, LNS Quickload Servo 2, 1 turret VDI30, tailstock, 3-jaw chuck KNCS-N-225-65 Chip conveyor with coola...
Winterbach, Germany